Ferroelectric tunnel junction

Last updated September 25, 2024

A Ferroelectric tunnel junction (FTJ) is a form of tunnel junction including a ferroelectric dielectric material sandwiched between two electrically conducting materials.^[1] Electrons do not directly pass through the junction, and instead they pass the barrier via quantum tunnelling. The structure is similar to a ferroelectric capacitor, but the ferroelectric layer is fabricated thin enough to enable significant tunneling current. The magnitude of the tunneling current is switched by the ferroelectric polarization and is governed by the tunneling electroresistance (TER).^[1]

There exists two conditions that must be met in order to manufacture a reliable FTJ: the FE-layer must be at maximum 3 nm in order to allow the electron tunneling (see section tunneling), and the interfaces on both sides need to be energetically asymmetrical in order to obtain two separate potential barrier heights.^[2]

Description

Ferroelectric tunnel junctions are being developed as a memristive component for the semiconductor industry. As of early 2024, FTJ based technologies are not commercially available. To enable sufficient tunneling probability, the ferroelectric layer must be thin enough (in the nanometer scale), rendering many conventional ferroelectric materials redundant. Ferroelectricity as a phenomenon was long thought to disappear in thicknesses required for tunneling, which hindered research around the topic until the 2000s. Since, significant ferroelectricity has been shown in thin films, and FTJs have been successfully shown to follow the proposed working principle.^[2]

While most ferroelectric materials require high fabrication temperatures, polycrystalline thin film hafnium oxide has been shown to be ferroelectric even with back-end complementary metal oxide semiconductor (CMOS) compatible fabrication temperatures, rendering FTJs especially interesting for the semiconductor industry.^[2]

The hafnium oxide is deposited using atomic layer deposition (ALD) to enable precise growth to form thin enough layers.^[2] FTJs have gained significant interest due to the memristive properties as well as CMOS compatible operating voltages and fabrication methods. In addition to ferroelectric tunnel junctions, there are other ferroelectric devices, including ferroelectric capacitors (FeCAP), ferroelectric field-effect transistors (FeFET), ferroelectric random-access memory (FeRAM)^[1] and multiferroic tunnel junctions (MFTJ), which are ferroelectric tunnel junction with ferromagnetic materials as the two electrodes.^[3]

Basic operating principle

Ferroelectric tunnel junctions are devices where the current through the device can be controlled by the voltage driven across the device. These memristive components use ferroelectric behavior to change the tunneling probability through the device.

Ferroelectricity

In a simple explanation of ferroelectricity, the electric dipole moments of the crystalline unit cells point first in random directions. As a voltage is driven across the material, these dipole moments rotate to align with the electric field induced by the voltage difference. Once the voltage is lowered back to zero, the dipole moments remain aligned with the previous field. The sum of individual dipole moments form the polarization of the material. In non-ferroelectric materials the polarization relaxes back to zero once the voltage is brought down; in ferroelectric materials the polarization remains. When a voltage of the opposite sign is driven through the same piece of ferroelectric material, the polarization switches to point in the opposite direction. Again, the polarization remains even after the field is reduced to zero. This results in a hysteresis effect seen in the polarization-electric field (PE) curve.^[4]

Switching the ferroelectric polarization of the material affects the height of the potential barrier in the device. The potential barrier influences the tunneling probability and thus the current measured, which can be utilized as voltage-controlled memory.

Tunneling

As the name ferroelectric tunnel junction suggests, the devices operate based on quantum tunneling through a barrier. As electrons tunnel through the barrier, the resulting movement can be measured as current. The amplitude of the current is determined by the tunneling probability.

On the interface of the insulating potential barrier, when the energy of the incident wave is lower than the barrier energy, the wavefunction decays exponentially into the insulator. Depending on the ratio of thickness with respect to the decay constant of the material, there is a chance of tunneling through the material, which is represented as the transmission coefficient:

$T(E)=\exp(-2\int _{x_{1}}^{x_{2}}dx{\sqrt {2m(V(x)-E)/\hbar ^{2}}}),$

where $x_{1}$ and $x_{2}$ are the edges of the potential barrier, $V(x)$ is the height of the potential barrier at point $x$ , $E$ is the energy of the electron, and $m$ is the mass of electron.

In addition to direct tunneling, Fowler-Nordheim tunneling, and thermionic emission contribute to the total current significantly in different operating voltages.^[1]

Current state of research and development

As of now, FTJs are CMOS back-end compatible, whereas the front-end compatibility is still under development. Nevertheless, the back-end compatibility allows the integration of FTJs into current silicon semiconductor technology with relatively small investments into new fabrication infrastructure. As computing, due to emergence of machine learning and artificial intelligence, is shifting increasingly from logic-centric into memory-centric computing, the research and development into power efficient, fast, and reliable CMOS compatible non-volatile memory is highly relevant.^[5]

Due to the non-destructive readout of the non-volatile memory implemented with FTJs, the components have gained interest in the field of neuromorphic computing. In addition, FTJs exhibit behavior such as accumulative switching, which is promising in hardware implementations of spiking neural networks.^[5]

The existence of interfacial layers between the metal and FE material, also known as dead layers, cause changes in device characteristics plaguing the functionality of the device.^[2]

Other tunnel junctions

In addition to ferroelectric tunnel junctions, other more established and emerging devices based on the same principles exist. These include:

Magnetic tunnel junction: the electrons tunnel from one magnetic material to another via a thin insulating barrier.
Multijunction photovoltaic cell
Tunnel diode
Superconducting tunnel junction

Scanning tunneling microscope tip/air/substrate structure can be also viewed as a tunnel junction. Some research has been done with STM tips concerning ferroelectricity, in controlling the domain switching with an STM tip.^[6] This is not a ferroelectric tunnel junction since the ferroelectric material does not function as the potential barrier.

Related Research Articles

<span class="mw-page-title-main">MOSFET</span> Type of field-effect transistor

In electronics, the metal–oxide–semiconductor field-effect transistor is a type of field-effect transistor (FET), most commonly fabricated by the controlled oxidation of silicon. It has an insulated gate, the voltage of which determines the conductivity of the device. This ability to change conductivity with the amount of applied voltage can be used for amplifying or switching electronic signals. The term metal–insulator–semiconductor field-effect transistor (MISFET) is almost synonymous with MOSFET. Another near-synonym is insulated-gate field-effect transistor (IGFET).

Ferroelectricity is a characteristic of certain materials that have a spontaneous electric polarization that can be reversed by the application of an external electric field. All ferroelectrics are also piezoelectric and pyroelectric, with the additional property that their natural electrical polarization is reversible. The term is used in analogy to ferromagnetism, in which a material exhibits a permanent magnetic moment. Ferromagnetism was already known when ferroelectricity was discovered in 1920 in Rochelle salt by Joseph Valasek. Thus, the prefix ferro, meaning iron, was used to describe the property despite the fact that most ferroelectric materials do not contain iron. Materials that are both ferroelectric and ferromagnetic are known as multiferroics.

A bipolar junction transistor (BJT) is a type of transistor that uses both electrons and electron holes as charge carriers. In contrast, a unipolar transistor, such as a field-effect transistor (FET), uses only one kind of charge carrier. A bipolar transistor allows a small current injected at one of its terminals to control a much larger current flowing between the terminals, making the device capable of amplification or switching.

Complementary metal–oxide–semiconductor is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFETs for logic functions. CMOS technology is used for constructing integrated circuit (IC) chips, including microprocessors, microcontrollers, memory chips, and other digital logic circuits. CMOS technology is also used for analog circuits such as image sensors, data converters, RF circuits, and highly integrated transceivers for many types of communication.

Spintronics, also known as spin electronics, is the study of the intrinsic spin of the electron and its associated magnetic moment, in addition to its fundamental electronic charge, in solid-state devices. The field of spintronics concerns spin-charge coupling in metallic systems; the analogous effects in insulators fall into the field of multiferroics.

A quantum well is a potential well with only discrete energy values.

In physics, quantum tunnelling, barrier penetration, or simply tunnelling is a quantum mechanical phenomenon in which an object such as an electron or atom passes through a potential energy barrier that, according to classical mechanics, should not be passable due to the object not having sufficient energy to pass or surmount the barrier.

A high-electron-mobility transistor, also known as heterostructure FET (HFET) or modulation-doped FET (MODFET), is a field-effect transistor incorporating a junction between two materials with different band gaps as the channel instead of a doped region. A commonly used material combination is GaAs with AlGaAs, though there is wide variation, dependent on the application of the device. Devices incorporating more indium generally show better high-frequency performance, while in recent years, gallium nitride HEMTs have attracted attention due to their high-power performance.

Tunnel magnetoresistance (TMR) is a magnetoresistive effect that occurs in a magnetic tunnel junction (MTJ), which is a component consisting of two ferromagnets separated by a thin insulator. If the insulating layer is thin enough, electrons can tunnel from one ferromagnet into the other. Since this process is forbidden in classical physics, the tunnel magnetoresistance is a strictly quantum mechanical phenomenon, and lies in the study of spintronics.

The threshold voltage, commonly abbreviated as V_th or V_GS(th), of a field-effect transistor (FET) is the minimum gate-to-source voltage (V_GS) that is needed to create a conducting path between the source and drain terminals. It is an important scaling factor to maintain power efficiency.

In semiconductor physics, the depletion region, also called depletion layer, depletion zone, junction region, space charge region, or space charge layer, is an insulating region within a conductive, doped semiconductor material where the mobile charge carriers have diffused away, or forced away by an electric field. The only elements left in the depletion region are ionized donor or acceptor impurities. This region of uncovered positive and negative ions is called the depletion region due to the depletion of carriers in this region, leaving none to carry a current. Understanding the depletion region is key to explaining modern semiconductor electronics: diodes, bipolar junction transistors, field-effect transistors, and variable capacitance diodes all rely on depletion region phenomena.

Ferroelectric RAM is a random-access memory similar in construction to DRAM but using a ferroelectric layer instead of a dielectric layer to achieve non-volatility. FeRAM is one of a growing number of alternative non-volatile random-access memory technologies that offer the same functionality as flash memory. An FeRAM chip contains a thin film of ferroelectric material, often lead zirconate titanate, commonly referred to as PZT. The atoms in the PZT layer change polarity in an electric field, thereby producing a power-efficient binary switch. However, the most important aspect of the PZT is that it is not affected by power disruption or magnetic interference, making FeRAM a reliable nonvolatile memory.

<span class="mw-page-title-main">Coulomb blockade</span>

In mesoscopic physics, a Coulomb blockade (CB), named after Charles-Augustin de Coulomb's electrical force, is the decrease in electrical conductance at small bias voltages of a small electronic device comprising at least one low-capacitance tunnel junction. Because of the CB, the conductance of a device may not be constant at low bias voltages, but disappear for biases under a certain threshold, i.e. no current flows.

Multiferroics are defined as materials that exhibit more than one of the primary ferroic properties in the same phase:

Hafnium(IV) oxide is the inorganic compound with the formula HfO^₂. Also known as hafnium dioxide or hafnia, this colourless solid is one of the most common and stable compounds of hafnium. It is an electrical insulator with a band gap of 5.3~5.7 eV. Hafnium dioxide is an intermediate in some processes that give hafnium metal.

A resonant-tunneling diode (RTD) is a diode with a resonant-tunneling structure in which electrons can tunnel through some resonant states at certain energy levels. The current–voltage characteristic often exhibits negative differential resistance regions.

<span class="mw-page-title-main">Tunnel junction</span> Barrier between electrically conducting materials

In electronics, a tunnel junction is a barrier, such as a thin insulating layer or electric potential, between two electrically conducting materials. Electrons pass through the barrier by the process of quantum tunnelling. Classically, the electron has zero probability of passing through the barrier. However, according to quantum mechanics, the electron has a non-zero wave amplitude in the barrier, and hence it has some probability of passing through the barrier. Tunnel junctions serve a variety of different purposes.

A memristor is a non-linear two-terminal electrical component relating electric charge and magnetic flux linkage. It was described and named in 1971 by Leon Chua, completing a theoretical quartet of fundamental electrical components which also comprises the resistor, capacitor and inductor.

The field-effect transistor (FET) is a type of transistor that uses an electric field to control the flow of current in a semiconductor. It comes in two types: junction FET (JFET) and metal-oxide-semiconductor FET (MOSFET). FETs have three terminals: source, gate, and drain. FETs control the flow of current by the application of a voltage to the gate, which in turn alters the conductivity between the drain and source.

A solaristor is a compact two-terminal self-powered phototransistor. The two-in-one transistor plus solar cell achieves the high-low current modulation by a memresistive effect in the flow of photogenerated carriers. The term was coined by Dr Amador Perez-Tomas working in collaboration with other ICN2 researchers in 2018 when they demonstrated the concept in a ferroelectric-oxide/organic bulk heterojunction solar cell.

References

1 2 3 4 Garcia, Vincent; Bibes, Manuel (2014-07-24). "Ferroelectric tunnel junctions for information storage and processing". Nature Communications. 5 (1). doi:10.1038/ncomms5289. ISSN 2041-1723.
1 2 3 4 5 Sharma, Urvashi; Kumar, Gulshan; Mishra, Sachin; Thomas, Reji (2023-09-28). "Ferroelectric tunnel junctions: current status and future prospect as a universal memory". Frontiers in Materials. 10. doi: 10.3389/fmats.2023.1148979 . ISSN 2296-8016.
↑ "Ferroelectric Tunnel Junctions". UNLcms. Retrieved 2024-04-14.
↑ "Ferroelectric Materials (all content)". Dissemination of IT for the Promotion of Materials Science (DoITPoMS). University of Cambridge . Retrieved 2024-04-24.
1 2 Majumdar, Sayani (2022). "Back‐End CMOS Compatible and Flexible Ferroelectric Memories for Neuromorphic Computing and Adaptive Sensing". Advanced Intelligent Systems. 4 (4). doi:10.1002/aisy.202100175. ISSN 2640-4567.
↑ Chang, Kai; Küster, Felix; Miller, Brandon J.; Ji, Jing-Rong; Zhang, Jia-Lu; Sessi, Paolo; Barraza-Lopez, Salvador; Parkin, Stuart S. P. (2020-09-09). "Microscopic Manipulation of Ferroelectric Domains in SnSe Monolayers at Room Temperature". Nano Letters. 20 (9): 6590–6597. doi:10.1021/acs.nanolett.0c02357. ISSN 1530-6984. PMC 7498149 . PMID 32809837.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[a-1] 1 2 3 4 Garcia, Vincent; Bibes, Manuel (2014-07-24). "Ferroelectric tunnel junctions for information storage and processing". Nature Communications. 5 (1). doi:10.1038/ncomms5289. ISSN 2041-1723.

[c-2] 1 2 3 4 5 Sharma, Urvashi; Kumar, Gulshan; Mishra, Sachin; Thomas, Reji (2023-09-28). "Ferroelectric tunnel junctions: current status and future prospect as a universal memory". Frontiers in Materials. 10. doi: 10.3389/fmats.2023.1148979 . ISSN 2296-8016.

[b-3] "Ferroelectric Tunnel Junctions". UNLcms. Retrieved 2024-04-14.

[d-4] "Ferroelectric Materials (all content)". Dissemination of IT for the Promotion of Materials Science (DoITPoMS). University of Cambridge . Retrieved 2024-04-24.

[g-5] 1 2 Majumdar, Sayani (2022). "Back‐End CMOS Compatible and Flexible Ferroelectric Memories for Neuromorphic Computing and Adaptive Sensing". Advanced Intelligent Systems. 4 (4). doi:10.1002/aisy.202100175. ISSN 2640-4567.

[6] Chang, Kai; Küster, Felix; Miller, Brandon J.; Ji, Jing-Rong; Zhang, Jia-Lu; Sessi, Paolo; Barraza-Lopez, Salvador; Parkin, Stuart S. P. (2020-09-09). "Microscopic Manipulation of Ferroelectric Domains in SnSe Monolayers at Room Temperature". Nano Letters. 20 (9): 6590–6597. doi:10.1021/acs.nanolett.0c02357. ISSN 1530-6984. PMC 7498149 . PMID 32809837.

[1]

[2]

[3]

[4]

[5]

[6]