![]() | This article includes a list of general references, but it lacks sufficient corresponding inline citations .(June 2009) |
Fiat G.49 | |
---|---|
![]() | |
Fiat G-49 ver.1 | |
Role | Two-seat basic trainer |
Manufacturer | Fiat |
Designer | Giuseppe Gabrielli |
First flight | September 1952 |
Primary user | Aeronautica Militare |
Number built | 3 [1] |
The Fiat G.49 was an Italian two-seat basic trainer designed by Giuseppe Gabrielli and built by Fiat.
The G.49 was designed by Gabrielli as a replacement for the World War II-era US North American T-6 advanced trainer and was first flown in September 1952. The G.49 was an all-metal low-wing cantilever monoplane with retractable tailwheel landing gear. It had an enclosed cockpit with a raised canopy for a pupil and instructor in tandem. Two variants were built with different engine installations; the G.49-1 with an Alvis Leonides radial engine and the G.49-2 with a Pratt & Whitney radial engine.
The aircraft did not sell and only a small number were operated by the Italian Air Force.
Data from The Illustrated Encyclopedia of Aircraft (Part Work 1982-1985), 1985, Orbis Publishing, Page 1798
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Pratt & Whitney R-2800 Double Wasp is an American twin-row, 18-cylinder, air-cooled radial aircraft engine with a displacement of 2,800 cu in (46 L), and is part of the long-lived Wasp family of engines.
The Scottish Aviation Twin Pioneer was a British STOL transport aircraft built by Scottish Aviation Limited at Prestwick Airport, Scotland, during the 1950s. It was designed for both civil and military operators. It was conceived as a twin-engined version of the Pioneer light transport. Both aircraft required "an area only 30m (99ft) by 275m (902ft) in which to operate."
The Pratt & Whitney R-1830 Twin Wasp is an American air-cooled radial aircraft engine. It displaces 1,830 cu in (30.0 L) and its bore and stroke are both 5.5 in (140 mm). The design traces its history to 1929 experiments at Pratt & Whitney on twin-row designs. Production began in 1932 and it was widely used during the 1930s.
The Pratt & Whitney R-1340 Wasp is an aircraft engine of the reciprocating type that was widely used in American aircraft from the 1920s onward. It was the Pratt & Whitney aircraft company's first engine, and the first of the famed Wasp series. It was a single-row, nine-cylinder, air-cooled, radial design, and displaced 1,344 cubic inches (22 L); bore and stroke were both 5.75 in (146 mm). A total of 34,966 engines were produced.
The Pratt & Whitney R-985 Wasp Junior is a series of nine-cylinder, air-cooled, radial aircraft engines built by the Pratt & Whitney Aircraft Company from the 1930s to the 1950s. These engines have a displacement of 985 in3 (16 L); initial versions produced 300 hp (220 kW), while the most widely used versions produce 450 hp (340 kW).
The Curtiss F6C Hawk was a late 1920s American naval biplane fighter aircraft. It was part of the long line of Curtiss Hawk airplanes built by the Curtiss Aeroplane and Motor Company for the American military.
The Alvis Leonides is a British air-cooled nine-cylinder radial aero engine first developed by Alvis Car and Engineering Company in 1936.
The Fairchild F-11 Husky was a Canadian bush plane designed and manufactured in the post-Second World War era. Despite a promising design, a lack of a suitable powerplant hurt performance, and stiff competition from the de Havilland Beaver and de Havilland Otter designs meant the type never gained a solid foothold in the marketplace.
The Bell R-12 was an American 1940s military utility helicopter built by the Bell Helicopter company.
The Faucett F-19 was a 1940s Peruvian eight-seat high-wing transport monoplane built by the airline Faucett Perú for its own use.
The Thomas-Morse O-19 was an American observation biplane built by the Thomas-Morse Aircraft Company for the United States Army Air Corps.
The Piaggio P.150 was a 1950s Italian two-seat trainer designed and built by Piaggio to meet an Italian Air Force requirement to replace the North American T-6.
The Fiat G.2 was an Italian three-engine six-passenger monoplane transport aircraft designed by Giuseppe Gabrielli and built by Fiat.
The Boeing AT-15 was an American twin-engined bomber crew trainer designed and built by Boeing's Wichita Division. Only two prototypes, designated XAT-15, were built. Plans to build over 1,000 were cancelled on the United States' entry into the Second World War.
The Macchi MB.323 was an Italian single-engine basic training monoplane designed and built by Macchi. No orders were placed and only a prototype was built.
The Spartan C4 was an American four-seat cabin monoplane designed and built by the Spartan Aircraft Company.
The Cessna C-106 Loadmaster was a 1940s American twin-engined transport monoplane. Built of plywood it did not enter production due to a wartime shortage of material.
The Fiat G.5 was an Italian two-seat aerobatic tourer or trainer designed and built by Fiat Aviazione in small numbers.
The Walter Pollux is a Czechoslovakian nine-cylinder, air-cooled, radial engine, built by Walter Aircraft Engines for powering light aircraft and that first ran in 1936. The engine produces 240 kW (320 hp) at 1,800 rpm.
The Boulton Paul P.112 was an elementary trainer designed by Boulton Paul Aircraft for the Royal Air Force.