Fujica X-mount

Last updated

The Fujica X-mount was a lens mount created by Fujifilm in the late 1970s and early 1980s for the new Fujica SLR lineup: AX-1, AX-3, AX-5, AX Multi, STX-1, STX-1N, STX-2, MPF105X, MPF105XN. It replaced the M42 screw mount used on their earlier SLRs.

Contents

The mount is a bayonet type, with a 65° clockwise lock, and a flange focal distance of 43.5 mm. [1]

With the advent of autofocus, the Fujica series of 35 mm SLR cameras was discontinued in 1985, rendering this mount obsolete. [2] Fuji would return to the SLR market in 2000 with a series of digital SLR cameras starting with the FinePix S1 Pro, but these were based on Nikon designs and used the autofocus version of the Nikon F-mount.

Fujifilm introduced a line of twenty-seven X-Fujinon lenses with this mount (as well as three Fujinar lenses):

Fujifilm X-Fujinon lenses

The following lists Fujifilm X-Fujinon lenses with this mount (not including Fujinar lenses with this mount). Fujifilm X-Fujinon lenses line.png

Not on that list are the following lenses:

The Fujinar lenses are:

The "no-DM" lens cannot be used for program and shutter priority exposure modes of the AX-5 SLR; aperture priority and manual mode will work.

Accessories

There were some accessories that complied with Fujica X-mount:

See also

Related Research Articles

<span class="mw-page-title-main">Rangefinder camera</span> Camera fitted with a rangefinder

A rangefinder camera is a camera fitted with a rangefinder, typically a split-image rangefinder: a range-finding focusing mechanism allowing the photographer to measure the subject distance and take photographs that are in sharp focus. Most varieties of rangefinder show two images of the same subject, one of which moves when a calibrated wheel is turned; when the two images coincide and fuse into one, the distance can be read off the wheel. Older, non-coupled rangefinder cameras display the focusing distance and require the photographer to transfer the value to the lens focus ring; cameras without built-in rangefinders could have an external rangefinder fitted into the accessory shoe. Earlier cameras of this type had separate viewfinder and rangefinder windows; later the rangefinder was incorporated into the viewfinder. More modern designs have rangefinders coupled to the focusing mechanism so that the lens is focused correctly when the rangefinder images fuse; compare with the focusing screen in non-autofocus SLRs.

<span class="mw-page-title-main">Carl Zeiss AG</span> German optics company

Carl Zeiss AG, branded as ZEISS, is a German manufacturer of optical systems and optoelectronics, founded in Jena, Germany in 1846 by optician Carl Zeiss. Together with Ernst Abbe and Otto Schott he laid the foundation for today's multi-national company. The current company emerged from a reunification of Carl Zeiss companies in East and West Germany with a consolidation phase in the 1990s. ZEISS is active in four business segments with approximately equal revenue in almost 50 countries, has 30 production sites and around 25 development sites worldwide.

<span class="mw-page-title-main">Fujifilm</span> Japanese conglomerate started as photographic film manufacturer

Fujifilm Holdings Corporation, trading as Fujifilm, or simply Fuji, is a Japanese multinational conglomerate headquartered in Tokyo, Japan, operating in the realms of photography, optics, office and medical electronics, biotechnology, and chemicals.

Fujinon is a brand of optical lenses made by Fuji Photo Film Co., Ltd, now known as Fujifilm. Fujifilm's Fujinon lenses have been used by professional photographers and broadcast stations as well as cinematography. Fujifilm started manufacture of optical glass in its Odawara Factory in Japan in 1940, which was the start of the Fujinon brand. They were proud of their use of expensive Platinum crucibles to get the purest glass achievable at the time. Fujifilm also pioneered Electron Beam Coating (EBC) which according to Fujifilm, represented a new high in lens precision and performance. The EBC process was significantly different from other coating processes by the number of coating, the thinness of the coating, and the materials used for coating. Fujifilm claimed they were able to have as much as 14 layers of coating and used materials such as zirconium oxide, and cerium fluoride, which could not be used for coating in the conventional coating process. The first lens to offer the Electron Beam Coating was the EBC Fujinon 55mm F3.5 Macro in 1972. Light transmission for the coating was said to be 99.8%. EBC later evolved into Super-EBC and HT-EBC.

<span class="mw-page-title-main">Nikon</span> Japanese multinational corporation that specializes in optics

Nikon Corporation, also known just as Nikon, is a Japanese multinational corporation headquartered in Tokyo, Japan; it specializes in creating and marketing optics and imaging products. The companies held by Nikon form the Nikon Group.

<span class="mw-page-title-main">Digital single-lens reflex camera</span> Digital cameras combining the parts of a single-lens reflex camera and a digital camera back

A digital single-lens reflex camera is a digital camera that combines the optics and the mechanisms of a single-lens reflex camera with a solid-state image sensor and digitally records the images from the sensor.

<span class="mw-page-title-main">Nikon F-mount</span> Lens mount

The Nikon F-mount is a type of interchangeable lens mount developed by Nikon for its 35mm format single-lens reflex cameras. The F-mount was first introduced on the Nikon F camera in 1959, and features a three-lug bayonet mount with a 44 mm throat and a flange to focal plane distance of 46.5 mm. The company continues, with the 2020 D6 model, to use variations of the same lens mount specification for its film and digital SLR cameras.

<span class="mw-page-title-main">Nikon D200</span> Digital single-lens reflex camera

The Nikon D200 is a 10.2-megapixel digital single-lens reflex camera that falls between entry-level/midrange DSLR cameras such as the Nikon D40, Nikon D40x, and D80 and high-end models such as the Nikon D2Hs and D2Xs. It was released by the Nikon Corporation in November 2005. The D200 was succeeded by the D300 in August 2007.

<span class="mw-page-title-main">M42 lens mount</span> Screw thread mounting standard for attaching lenses to 35 mm cameras

The M42 lens mount is a screw thread mounting standard for attaching lenses to 35 mm cameras, primarily single-lens reflex models. It is more accurately known as the M42 × 1 mm standard, which means that it is a metric screw thread of 42 mm diameter and 1 mm thread pitch.

<span class="mw-page-title-main">Pentax K-mount</span> Series of camera lens mounts made by Pentax

The Pentax K-mount, sometimes referred to as the "PK-mount", is a bayonet lens mount standard for mounting interchangeable photographic lenses to 35 mm single-lens reflex (SLR) cameras. It was created by Pentax in 1975, and has since been used by all Pentax 35 mm and digital SLRs and also the MILC Pentax K-01. A number of other manufacturers have also produced many K-mount lenses and K-mount cameras.

<span class="mw-page-title-main">Fujica</span>

Fujica is the name given by Fujifilm of Japan to its line of still-photography and motion picture cameras.

<span class="mw-page-title-main">FinePix S3 Pro</span>

The Fujifilm FinePix S3 Pro is an interchangeable lens digital single-lens reflex camera introduced in February 2004. Its successor, the Finepix S5 Pro, was released on 25 September 2006. It is based on a Nikon F80 viewfinder, shutter, mirror-box and autofocus modules surrounded by a Fujifilm body that includes its own proprietary CCD image sensor and electronics, and a vertical grip shutter release. It has a Nikon F lens mount and can use most lenses made for 35 mm Nikon SLR cameras, but only with manual operation with Nikon AIS lenses, unusually for a digital SLR the S3 Pro can be used with a manual cable release.

<span class="mw-page-title-main">Lens speed</span>

Lens speed refers to the maximum aperture diameter, or minimum f-number, of a photographic lens. A lens with a larger than average maximum aperture is called a "fast lens" because it can achieve the same exposure as an average lens with a faster shutter speed. Conversely, a smaller maximum aperture is "slow" because it delivers less light intensity and requires a slower (longer) shutter speed.

<span class="mw-page-title-main">Lenses for SLR and DSLR cameras</span>

This article is about photographic lenses for single-lens reflex film cameras (SLRs) and digital single-lens reflex cameras (DSLRs). Emphasis is on modern lenses for 35 mm film SLRs and for DSLRs with sensor sizes less than or equal to 35 mm ("full-frame").

<span class="mw-page-title-main">Nikon E series</span> Series of digital SLR camera models

The Nikon E series, co-developed with Fujifilm, are autofocus 1.3 megapixel professional grade quasi-full frame (35mm) Nikon F-mount digital single lens reflex cameras (DSLR) manufactured by Nikon since 1995.

<span class="mw-page-title-main">Sony E-mount</span>

The E-mount is a lens mount designed by Sony for their NEX and ILCE series of camcorders and mirrorless cameras. The E-mount supplements Sony's α mount, allowing the company to develop more compact imaging devices while maintaining compatibility with 35mm sensors. E-mount achieves this by:

<span class="mw-page-title-main">Fuji GX680</span>

The Fuji GX680 is a series of single lens reflex system cameras for medium format film produced by Fujifilm with interchangeable camera lenses and interchangeable film holders for the unusual film format 6×8 cm on 120 and 220 roll film. The distinguishing feature of the Fuji GX680 is the articulating front standard, which runs on a rail connecting lens and camera body by a bellows; the interchangeable lens is permanently mounted to a lens board.

<span class="mw-page-title-main">Fujifilm X-mount</span>

The Fujifilm X-mount is a type of interchangeable lens mount designed by Fujifilm for use in those cameras in their X-series line that have interchangeable-lenses. These lenses are designed for 23.6mm x 15.6mm APS-C sensors.

<span class="mw-page-title-main">Nikon Z-mount</span> Digital camera lens mount

Nikon Z-mount is an interchangeable lens mount developed by Nikon for its mirrorless digital cameras. In late 2018, Nikon released two cameras that use this mount, the full-frame Nikon Z 7 and Nikon Z 6. In late 2019 Nikon announced their first Z-mount camera with an APS-C sensor, the Nikon Z 50. In July 2020 the entry level full-frame Z 5 was introduced. In October 2020, Nikon announced the Nikon Z 6II and Nikon Z 7II, which succeed the Z 6 and Z 7, respectively. The APS-C lineup was expanded in July 2021, with the introduction of the retro styled Nikon Z fc, and in October 2021, Nikon unveiled the Nikon Z 9, which effectively succeeds the brand's flagship D6 DSLR. The APS-C lineup was further expanded with the Nikon Z 30, announced at the end of June 2022.

The Fuji GS645 series was a lineup of cameras manufactured by Fujifilm of Japan. The lineup included several cameras, differentiated by their focal length and by some cosmetic features: The GS645, GS645W, and GS645S. The cameras, released between March 1983 and October 1984, are medium format and accept either 120 or 220 film. The cameras take photographs in the 6 × 4.5 frame size in portrait orientation.

References

  1. AX-1 owner's manual
  2. "Fujica X Mount Camera Bodies". Pentax-manuals.com. Retrieved 2016-03-04.