The Emergency Fleet Corporation (EFC) was established by the United States Shipping Board, sometimes referred to as the War Shipping Board, on 16 April 1917 pursuant to the Shipping Act to acquire, maintain, and operate merchant ships to meet national defense, foreign and domestic commerce during World War I.
USS Sturgeon Bay was a wood-hulled freighter built in 1918 at Sturgeon Bay, Wisconsin for the United States Shipping Board during World War I.
West Compo was a steam cargo ship built in 1918–1919 by Northwest Steel Company of Portland for the United States Shipping Board as part of the wartime shipbuilding program of the Emergency Fleet Corporation (EFC) to restore the nation's Merchant Marine. The vessel was commissioned into the Naval Overseas Transportation Service (NOTS) of the United States Navy in January 1919 and after only one overseas trip was decommissioned four months later and returned to the USSB. Afterwards the vessel was largely employed on the Atlantic Coast of the United States to France route until mid-1921 when she was laid up and eventually broken up for scrap in 1936.
Short Brothers Limited was a British shipbuilding company formed in 1850 and based at Pallion, Sunderland since 1869. The company closed in 1964 when it failed to invest to build bigger ships.
Theodore Ernest Ferris was a naval architect and engineer responsible for the "Ferris Designs" used by the US Emergency Fleet Corporation, of the United States Shipping Board, during World War I.
Yaklok was a steam cargo ship built in 1918–1919 by Seattle North Pacific Shipbuilding Company of Seattle for the United States Shipping Board as part of the wartime shipbuilding program of the Emergency Fleet Corporation (EFC) to restore the nation's Merchant Marine. The vessel made several trips to Europe during the first two years of her career before being laid up in mid-1921 and eventually being broken up for scrap in 1930.
The Design 1023 ship was a steel-hulled cargo ship design approved for mass production by the United States Shipping Board's (USSB) Emergency Fleet Corporation (EFC) in World War I. Like many of the early designs approved by the EFC, the Design 1023 did not originate with the EFC itself but was based on an existing cargo ship designed by Theodore E. Ferris for the United States Shipping Board (USSB). The ships, to be built by the Submarine Boat Corporation of Newark, New Jersey, were the first to be constructed under a standardized production system worked out by Ferris and approved by the USSB.
The McDougall Duluth Shipbuilding Company was a large-scale wartime ship manufacturing shipyard, located at the city of Riverside, near Duluth. McDougall Duluth Shipbuilding was at 110 Spring Street, Duluth, Minnesota, now the site of the West Duluth's Spirit Lake Marina. The shipyard was located on St. Louis River Estuary at western part of Lake Superior. McDougall Duluth Shipbuilding Company was found by Alexander McDougall (1845-1923) in 1917 to built ships for World War I. McDougall Duluth Shipbuilding Company and the Superior Shipbuilding Company were called the Twin Ports shipbuilding industry of Minnesota and Wisconsin. Once built the ships can travel to the Atlantic Ocean through the Great Lakes and the Saint Lawrence Seaway.
Walter Butler Shipbuilders Inc. was a large-scale World War II ship manufacturing shipyard, located at Superior, Wisconsin. Walter Butler purchased the shipyard from Lake Superior Shipbuilding in 1942. Walter Butler Shipbuilders Inc. was at E 1st St, Superior, Wisconsin. The shipyard was located on the western part of Lake Superior. Walter Butler Shipbuilders Inc. was found by Walter Butler in 1942 to built ships for World War II. Walter Butler Shipbuilders Inc., the McDougall Duluth Shipbuilding Company and the Superior Shipbuilding Company were called the Twin Ports shipbuilding industry of Minnesota and Wisconsin. Once built the ships can travel to the Atlantic Ocean through the Great Lakes and the Saint Lawrence Seaway.
The Design 1019 ship was a steel-hulled cargo ship design approved for mass production by the United States Shipping Board's Emergency Fleet Corporation (EFT) in World War I.
Craig Shipbuilding was a shipbuilding company in Long Beach, California. To support the World War I demand for ships Craig Shipbuilding shipyard switched over to military construction and built: US Navy Submarines and Cargo Ships. Craig Shipbuilding was started in 1906 by John F. Craig. John F. Craig had worked in Toledo, Ohio with his father, John Craig (1838-1934), and Blythe Craig, both shipbuilders, their first ship was built in 1864 at Craig Shipbuilding Toledo. John F. Craig opened his shipbuilding company in Port of Long Beach on the south side of Channel 3, the current location of Pier 41 in the inner harbor, becoming the port's first shipyard. In 1907 Craig Shipbuilding is given a contract to dredge a channel from the Pacific ocean to the inner harbor. In 1917 Craig sold the shipyard to the California Shipbuilding Company. But then opened a new shipyard next to the one he just sold and called it the Long Beach Shipbuilding Company. The Long Beach Shipbuilding Company built cargo ships in 1918, 1919, and 1920 for the United States Shipping Board.
The Design 1012 ship was a steel-hulled cargo ship design approved for production by the United States Shipping Board's Emergency Fleet Corporation (EFT) in World War I. They were referred to as the "Munrio"-type which was the name of the SS Munrio, a similar pre-EFT ship built at the Bethlehem Sparrows Point Shipyard. They were all built by Merrill-Stevens Drydock & Repair Company at their Jacksonville, Florida shipyard. 4 ships were completed for the USSB in 1918 and 1919. An additional order of 17 ships was cancelled.
West Pocasset was a steam cargo ship built in 1919 by Northwest Steel Company of Portland for the United States Shipping Board as part of the wartime shipbuilding program of the Emergency Fleet Corporation (EFC) to restore the nation's Merchant Marine. The freighter was operated sparingly on the United States to Europe routes during the first two years of her career before being laid up. The ship was briefly reactivated in 1929 but was again laid up next year and remained idle for the next ten years. In January 1941 the freighter was sold together with four other vessels to the United States Line and was put under operation by its fully owned Panama-registered subsidiary to carry war matériel and supplies between Canada and United Kingdom and renamed Chepo. In early January 1942 while on one of her regular convoy trips, she was torpedoed and sunk by German submarine U-43 with the loss of seventeen men.
The Design 1065 ship was a wooden-hulled cargo ship design approved for production by the United States Shipping Board's Emergency Fleet Corporation (EFT) in World War I. A total of 7 ships were ordered and completed for the USSB from 1918 to 1919. The ships were constructed at the Bellingham, Washington shipyard of Pacific American Fisheries. The USSB originally wanted Pacific American Fisheries to follow its standard "Ferris-type" design used by other shipyards but PAF was successful in convincing them to use their own design which they felt was more seaworthy. The cost was $50,000 per ship.
Bethlehem Beaumont Shipyard was a shipyard in Beaumont, Texas that opened in 1948. The yard is located on an island in the Neches River. The deep-water port shipyard was founded in 1917 as the Beaumont Shipbuilding & Dry Dock Company. Beaumont Shipbuilding & Dry Dock Company started as a World War I Emergency Shipbuilding Program yard. In 1922 the Pennsylvania Car & Foundry, of Sharon, Pennsylvania purchased the yard and renamed the yard Pennsylvania Shipyards, Inc.. The yard built barges and rail cars and also operated under the name Petroleum Iron Works at the site. For World War II the yard build tugboats and barges as part of the emergency shipbuilding program. After the war Bethlehem Steel purchased the yard in 1948 as part for the Bethlehem Shipbuilding Corporation. Bethlehem Beaumont Shipyard transitioned the yard into a jackup rig offshore drilling rig yard. The yard closed in the 1980s, with the rig market collapse. Bethlehem Steel sold the yard in 1989 to Trinity Industries. Trinity Industries purchased a Panamax floating and continued operations. The Panamax floating was moved to New Orleans in 1994. Chicago Bridge & Iron Company purchased the yard in 2006. Chicago Bridge & Iron turned the yard into a fabrication yard. In 2017 Chicago Bridge & Iron Company closed the yard due to damage from Hurricane Harvey, ending work for 455 employees. Many of workers were relocated to other Chicago Bridge & Iron sites. The site is now Allegiant Industrial Island Park Campus that opened in 2018.
The Design 1001 ship was a wood-hulled cargo ship design approved for production by the United States Shipping Board's Emergency Fleet Corporation (EFT) in World War I. They were referred to as the "Ferris"-type after its designer, naval architect Theodore E. Ferris. Most ships were completed in 1918 or 1919. Many ships were completed as barges or as hulls.
The Design 1004 ship was a wood-hulled cargo ship design approved for production by the United States Shipping Board's Emergency Fleet Corporation (EFT) in World War I. They were referred to as the "Peninsula"-type as all were built by the Peninsula Shipbuilding Company in Portland, Oregon. All ships were completed in 1918 or 1919. Ten ships were completed. The "Peninsula"-type were the only wooden-hull ships built with a turbine engine which was common on steel ships built at the same time.
The Newcomb Lifeboat Company was a shipyard located in Hampton, Virginia that operated during World War I.
The Design 1016 ship was a wood-hulled cargo ship design approved for production by the United States Shipping Board's Emergency Fleet Corporation (EFT) in World War I. All were built by the Grays Harbor Motorship Company in Aberdeen, Washington. They were referred to as the "Ward"-type after M.R. Ward, manager at the Grays Harbor shipyard. All the hulls were laid down in 1919. The first ship of the class, the SS Adria, was listed at 3,132 gross tons with dimensions of 272.8 x 49.3 x 25.6, 1400 indicated horsepower, and carried a crew of 36.
The Design 1006 ship was a wood-hulled cargo ship design approved for production by the United States Shipping Board's Emergency Fleet Corporation (EFT) in World War I. They were referred to as the "Daugherty"-type after A. A. Daugherty, the president of the National Shipbuilding Company. The USSB ordered a total of 40 hulls from three shipyards: National Shipbuilding Company of Orange, Texas shipyard ; Union Bridge & Construction Company of Morgan City, Louisiana shipyard ; and Dirks Blodgett Shipbuilding Company of Pascagoula, Mississippi. The design was altered by National Shipbuilding increasing the deadweight to 5,000 tons. Only 12 were completed for the USSB while two were built as tankers in 1920 for the National Oil Transportation Company of Port Arthur, Texas and one as a barge.
