Georgetown and North Carolina Railroad

Last updated

The Georgetown and North Carolina Railroad was a Southeastern railroad company that operated after Reconstruction.

The company was originally chartered as the Georgetown and North Carolina Narrow Gauge Railroad by the South Carolina General Assembly in 1878. [1]

The charter was amended in 1882 to strike "Narrow Gauge" from its name, [2] and the line was renamed the Georgetown and North Carolina Railroad.

The original intent was to build a line from Georgetown, South Carolina, through Georgetown, Williamsburg, Clarendon, Sumter and Kershaw counties, to the North Carolina border. [1]

Its In 1883, the line was to be rerouted so that it would be able to access Charleston Harbor. [1]

In 1885, the S.C. General Assembly approved changing the name of the Georgetown and North Carolina to the Charleston, Cincinnati and Chicago Railroad Company. [3]

Related Research Articles

<span class="mw-page-title-main">Richmond and Danville Railroad</span>

The Richmond and Danville Railroad (R&D) Company was a railroad that operated independently from 1847 until 1894, first in the U.S. state of Virginia, and later on 3,300 miles (5,300 km) of track in nine states.

<span class="mw-page-title-main">Virginia Central Railroad</span> Railroad in Virginia

The Virginia Central Railroad was an early railroad in the U.S. state of Virginia that operated between 1850 and 1868 from Richmond westward for 206 miles (332 km) to Covington. Chartered in 1836 as the Louisa Railroad by the Virginia General Assembly, the railroad began near the Richmond, Fredericksburg and Potomac Railroad's line and expanded westward to Orange County, reaching Gordonsville by 1840. In 1849, the Blue Ridge Railroad was chartered to construct a line over the Blue Ridge Mountains for the Louisa Railroad which reached the base of the Blue Ridge in 1852. After a decision from the U.S. Supreme Court, the Louisa Railroad was allowed to expand eastward from a point near Doswell to Richmond.

<span class="mw-page-title-main">Plant System</span> Historic railroad system

The Plant System named after its owner, Henry B. Plant, was a system of railroads and steamboats in the U.S. South, taken over by the Atlantic Coast Line Railroad in 1902. The original line of the system was the Savannah, Florida and Western Railway, running across southern Georgia. The Plant Investment Company was formed in 1882 to lease and buy other railroads and expand the system. Other major lines incorporated into the system include the Savannah and Charleston Railroad and the Brunswick and Western Railroad.

<span class="mw-page-title-main">South Carolina Canal and Railroad Company</span>

The South Carolina Canal and Rail Road Company was a railroad in South Carolina that operated independently from 1830 to 1844. One of the first railroads in North America to be chartered and constructed, it provided the first steam-powered, scheduled passenger train service in the United States.

<span class="mw-page-title-main">South Carolina Railroad</span>

The South Carolina Rail Road Company was a railroad company that operated in South Carolina from 1843 to 1894, when it was succeeded by the Southern Railway. It was formed in 1844 by the merger of the South Carolina Canal and Rail Road Company (SCC&RR) into the Louisville, Cincinnati and Charleston Railroad Company. It was built with a track gauge of 5 ft.

The Petersburg Railroad ran from Petersburg, Virginia, south to Garysburg, North Carolina, from which it ran to Weldon via trackage rights over the Seaboard and Roanoke Railroad.

<span class="mw-page-title-main">Memphis and Charleston Railroad</span>

The Memphis and Charleston Railroad, completed in 1857, was the first railroad in the United States to link the Atlantic Ocean with the Mississippi River. Chartered in 1846, the 311 miles (501 km) 5 ft gauge railroad ran from Memphis, Tennessee to Stevenson, Alabama through the towns of Corinth, Mississippi and Huntsville, Alabama. The portion between Memphis and LaGrange, Tennessee was originally to be part of the LaGrange and Memphis Railroad, chartered in 1838. From Stevenson, the road was connected to Chattanooga, Tennessee via the Nashville and Chattanooga Railroad. In Alabama, the railroad followed the route of the Tuscumbia, Courtland and Decatur Railroad between Tuscumbia and Decatur, the first railroad to be built west of the Appalachian Mountains.

The Cincinnati District is a railroad line owned by the Norfolk Southern Railway and operated by Cincinnati Eastern Railroad in the U.S. state of Ohio. The line runs from Cincinnati, Ohio southeast to Portsmouth, Ohio along a former Norfolk and Western Railway line. Its southeast end is at the Columbus District near Portsmouth, while its northwest end is in Mariemont, Ohio, where it meets the Indiana and Ohio Railway's Midland Subdivision and Norfolk Southern's Dayton District.

The Cheraw and Salisburg Railroad was a shortline railroad that ran between Cheraw, South Carolina, and Wadesboro, North Carolina.

The Northeastern Railroad was a 103-mile (166 km) 5 ft gauge railroad that served South Carolina in the second half of the 19th century.

The South Carolina Pacific Railway was a shortline railroad operation that existed in eastern South Carolina in the late 19th century and much of the 20th century.

The Air Line Railroad Company of South Carolina was chartered as a South Carolina railroad that was to have served the Southeastern United States, beginning in the mid-19th century.

The Georgetown and North Carolina Narrow Gauge Railroad was a Southeastern railroad company chartered immediately after Reconstruction.

<span class="mw-page-title-main">North and South Carolina Railway</span> 20th century railway company in the Southeastern United States

The North and South Carolina Railway was a Southeastern railroad that operated in the Carolinas in the early part of the 20th century.

The Palmetto Railroad was a Southeastern railroad that served South Carolina and North Carolina in the late 19th century.

The Louisville, Cincinnati and Charleston Railroad was an antebellum railroad that served the State of South Carolina and Augusta, Georgia. It was a 5 ft gauge railroad line.

The Central Railroad of South Carolina was a South Carolina railroad that operated following Reconstruction. It ran between the town of Lane and Sumter, a distance of about 40 miles (64 km). The line is in service today as CSX's Lane Subdivision.

The Pee Dee River Railway is a South Carolina railroad that serves the far eastern portion of the state.

<span class="mw-page-title-main">Cleveland, Painesville and Ashtabula Railroad (1848–1869)</span> 19th-century American railroad

The Cleveland, Painesville and Ashtabula Railroad (CP&A), also known informally as the Cleveland and Erie Railroad, the Cleveland and Buffalo Railroad, and the Lake Shore Railroad, was a railway which ran from Cleveland, Ohio, to the Ohio-Pennsylvania border. Founded in 1848, the line opened in 1852. The railroad completed the rail link between Buffalo, New York, and Chicago, Illinois.

<span class="mw-page-title-main">Burlington and Northwestern Railway</span>

The Burlington and Northwestern Railway (B&NW) was a 3 ft narrow gauge railroad system in Iowa that operated during the late nineteenth and early twentieth centuries. It connected Burlington, Iowa with branches to Washington and Oskaloosa, Iowa. Incorporated in 1875 as the Burlington and Northwestern Narrow Gauge Railway Company, it began carrying traffic in 1876, when it also dropped 'narrow gauge' from its corporate name. The line reached Washington in 1880, operating over 52.5 miles (84.5 km) of track. In 1881, the Burlington and Western Railway Company, a subsidiary of the Chicago, Burlington and Quincy Railroad (CB&Q) was formed to connect the line to Oskaloosa, completed in 1883. For two decades, both lines were operated as a single system, until on June 20, 1902, the system was widened to standard gauge and the B&NW was adsorbed by the B&W. Later that year, the system was leased to the CB&Q, and in 1903, the entire system was deeded to the CB&Q.

References