Sport Biplane | |
---|---|
Role | Light recreational aircraft |
Manufacturer | Homebuilt |
Designer | George E. Gere, Jr |
First flight | 1932 |
The Gere Sport was an American single-seat sport biplane of the 1930s. Designed for amateur construction by George E. Gere, Jr. (known as Bud Gere) while a young student at the University of Minnesota. [1] It was later used as the basis of the 1960s EAA Biplane.
The Sport had a lightweight welded steel construction fuselage. The wings employed two solid wood spars each, with spruce leading edges. All structures were fabric covered. [1] Only the lower wing had ailerons and only they were mounted with a moderate upward angle (dihedral); a typical arrangement. The conventional landing gear was rigid and relied on large balloon tires to absorb impacts. [1] The spring steel tailskid came from a front leaf spring from a Ford Model T. [1] The sport had an open single-seat cockpit with a one-piece transparent windscreen. [1] The prototype was fitted with a 19 hp Chevrolet 4-cylinder water-cooled automobile engine. [1]
The 19-year-old Gere was killed in a January 1931 accident with an ice sled; he slipped and fell into the propeller arc. [1] At the time of his death the propeller and engine cowlings still needed to be fitted and the aircraft had not been flown. Gere's father, George Gere, Sr., with some of his son's friends, completed the aircraft. [1] The Sport first flew in 1932 from Wold-Chamberlain Airport, piloted by Elmore Wall, a test pilot for the Mohawk Aircraft Company. [1] Although underpowered with the Chevrolet, it was reputed to have flown well. After testing, the original Gere Sport was passed on to the University of Minnesota. [1]
A set of plans for the Sport was published in the October 1932 issue of Modern Mechanix and Inventions, which called it the Gere Sport Biplane and advertised the full blueprints for $5. The magazine touted the plane's ability to run with a range of Ford and Chevrolet engines, and sold conversion kits so builders could adapt the designs to their engine. [2] Plans appeared the following year in the 1933 Flying Manual, copies of which remain available through the Experimental Aircraft Association (EAA), based in Oshkosh, Wisconsin. It is believed at least three other aircraft were built near that time. [1]
An example of a Gere Sport is held in the collections and is on display at the Museum of Transport and Technology in New Zealand. [1] [3]
General characteristics
The Royal Aircraft Factory B.E.2 is a British single-engine tractor two-seat biplane, designed and developed at the Royal Aircraft Factory. Most of the roughly 3,500 built were constructed under contract by private companies, including established aircraft manufacturers and firms new to aircraft construction.
The Bowers Fly Baby is a homebuilt, single-seat, open-cockpit, wood and fabric low-wing monoplane that was designed by famed United States aircraft designer and Boeing historian, Peter M. Bowers.
The Laird LC-DW300 and LC-DW500 Super Solution aka "Sky Buzzard" was a racing biplane built in the early 1930s by Matty Laird for the Cleveland Speed Foundation, Laird was already famous in the air racing circuit. It had a large radial engine and an extremely faired windshield. Other than being a biplane, it was similar in appearance to the Gee Bee, a more famous racer from the period. It was an advanced design for the time because of the relatively clean aerodynamic construction and tight engine cowling.
The Ace Baby Ace, a single-seat, single-engine, parasol wing, fixed-gear light airplane, was marketed as a homebuilt aircraft when its plans were first offered for sale in 1929 — one of the first homebuilt aircraft plans available in the United States. Plans are still available and Baby Aces are still being built. Orland Corben designed a series of aircraft for the Ace Aircraft Manufacturing Company, the Baby Ace, Junior Ace, and Super Ace. Corben's name was associated with the aircraft, and it is commonly known as the Corben Baby Ace.
Homebuilt aircraft, also known as amateur-built aircraft or kit planes, are constructed by persons for whom this is not a professional activity. These aircraft may be constructed from "scratch", from plans, or from assembly kits.
Bernard H. Pietenpol (1901–1984) was an aircraft designer.
The Pitcairn Mailwing family was a series of American mail carrier and three-seat sport utility biplane aircraft produced from 1927 to 1931.
The Avro Type E, Type 500, and Type 502 made up a family of early British military aircraft, regarded by Alliott Verdon Roe as his firm's first truly successful design. It was a forerunner of the Avro 504, one of the outstanding aircraft of the First World War.
The Blackburn B-2 was a biplane side-by-side trainer aircraft designed and produced by the British aviation manufacturer Blackburn Aircraft.
The Curtiss-Wright CW-1 Junior, originally named the Curtiss-Robertson CR-1 Skeeter is a light sports aircraft produced in the United States in the 1930s. It had been intended to sell it for the price of a mid-range automobile.
The EAA Biplane is a recreational aircraft that was designed by the Experimental Aircraft Association in the United States and marketed as plans for home-built aircraft.
The Heath Parasol is an American single or two seat, open-cockpit, parasol winged, homebuilt monoplane.
The Payne Knight Twister is a single-seat, single-engine aerobatic sport aircraft first flown by Vernon Payne Sr. in the United States in 1932 and marketed in plans form for homebuilding.
The Waco 9 is an American-built three-seat biplane design that first flew in 1925.
The Stout Skycar was a series of four one-off American light aircraft of the 1930s.
The Smith DSA-1 Miniplane is a single-seat, single-engine sport aircraft designed in the United States in the 1950s and marketed for home building.
The Ford Flivver is a single-seat aircraft introduced by Henry Ford as the "Model T of the Air". After a fatal crash of a prototype into the ocean off Melbourne, Florida, production plans were halted.
The Westfall Sport is a single seat biplane modeled after the Waco F2.
The Explorer PG-1 Aqua Glider is an American single seat, biplane glider that was designed by Bill Skiliar in 1959 and made available as plans for amateur construction. The prototype was built with help from a troop of Air Explorer Scouts that same year.
Project Schoolflight was a youth outreach program of the Experimental Aircraft Association (EAA) which was jointly co-founded in 1955 by EAA founder Paul Poberezny and Robert D. Blacker, the director of the Aviation Industrial Arts program at St. Rita of Cascia High School in Chicago, Illinois.