Gum copal

Last updated

Gum copal is a resin produced by the sap of forest tree in the genus Daniellia.[ citation needed ] Due to common impurities and differences in regions, gum copal ranges in color from black to yellow to white. Gum copal, along with ivory and slaves, was a significant export from East Africa in the 19th century. [1] It can have an appearance similar to amber and may be mistaken for it. Unlike amber, gum copal is usually only 100–1,000 years old and it has not yet fossilized. [2]

Contents

Source locations

Gum copal is most commonly found in East Africa and Indonesia, and is also found in tropical regions such as South America, Malaysia and the Philippines. [3]

Comparison to amber

Throughout history, amber and gum copal have been mistaken for each other, as it is extremely difficult to discern between the two. A drop test using an alcohol or other solvent will leave amber unaffected, while copal's surface will become sticky. A heat test can also be used as amber will soften and blacken its surface and copal will begin to melt. [2]

Another difference between the two lies in what specimens are inside the material. As both amber and gum copal are produced from tree sap hardening, insects and other organisms can be trapped inside (an idea which provided the basis for DNA extraction in Jurassic Park ). Depending on whether this organism can still be found alive in the present or recent past can give reference to the age and identification of the sample.

Uses

Gum copal has had a wide variety of uses in the past and present. Primarily used as an incense by ancient civilizations, it was used as an early form of glue, and traditional medicine for dysentery, stomach pains, dizziness, and fright. It was often used in religious occasions in the form of sacrifices to deities, typically designating the copal as food for the gods.[ citation needed ]

Today, gum copal is popularly used as incense. It is also used as a varnish or waterproofing material. When heated with certain oils it becomes nearly transparent. It can be used as an ingredient in adhesives, perfumes, printing ink, paints, and films.

Gum copal is sold primarily in two forms. The first is as powder, which is usually mixed with turpentine to make varnish. The other is as natural "rocks" which can be used in many different ways.

Commercial grades

Prime white soft (PWS) is the highest grade of gum copal. It is white in color and 99–100% purity. It is used for making varnish for wood surfaces and it dries to a hard and shiny film. Such varnish is high-luster and resistant to external scratches.

DBB grade is pebble-sized and whitish yellow in color with about 90–95% purity. This is an economy grade, ideal for production of low-end varnishes. Its solubility is good. It can contain some black copal, but it is still easily dissolved in alcohol solvent mixtures. It is the most common grade for use in incense.

White soft (WS) is the lowest grade of gum copal, larger chunks, black in color with about 60% purity. The impurities include tree bark and soil.

The powder leftover from the processing of PWS and DBB is usually used for varnish. [4]

Related Research Articles

<span class="mw-page-title-main">Amber</span> Fossilized tree resin

Amber is fossilized tree resin that has been appreciated for its color and natural beauty since Neolithic times. Much valued from antiquity to the present as a gemstone, amber is made into a variety of decorative objects. Amber is used in jewelry and has been used as a healing agent in folk medicine.

<span class="mw-page-title-main">Paint</span> Pigment applied over a surface that dries as a solid film

Paint is any pigmented liquid, liquefiable, or solid mastic composition that, after application to a substrate in a thin layer, converts to a solid film. It is most commonly used to protect, color, or provide texture. Paint can be made in many colors—and in many different types. Paint is typically stored, sold, and applied as a liquid, but most types dry into a solid. Most paints are either oil-based or water-based and each has distinct characteristics. For one, it is illegal in most municipalities to discard oil-based paint down household drains or sewers. Clean-up solvents are also different for water-based paint than they are for oil-based paint. Water-based paints and oil-based paints will cure differently based on the outside ambient temperature of the object being painted Usually, the object being painted must be over 10 °C (50 °F), although some manufacturers of external paints/primers claim they can be applied when temperatures are as low as 2 °C (35 °F).

<span class="mw-page-title-main">Lac</span> Resinous secretion of lac insects

Lac is the resinous secretion of a number of species of lac insects, of which the most commonly cultivated is Kerria lacca.

<span class="mw-page-title-main">Shellac</span> Resin secreted by the female lac bug

Shellac is a resin secreted by the female lac bug on trees in the forests of India and Thailand. It is processed and sold as dry flakes and dissolved in alcohol to make liquid shellac, which is used as a brush-on colorant, food glaze and wood finish. Shellac functions as a tough natural primer, sanding sealant, tannin-blocker, odour-blocker, stain, and high-gloss varnish. Shellac was once used in electrical applications as it possesses good insulation qualities and it seals out moisture. Phonograph and 78 rpm gramophone records were made of it until they were replaced by vinyl long-playing records from 1948 onwards.

<span class="mw-page-title-main">Resin</span> Solid or highly viscous substance

In polymer chemistry and materials science, resin is a solid or highly viscous substance of plant or synthetic origin that is typically convertible into polymers. Resins are usually mixtures of organic compounds. This article focuses on naturally occurring resins.

<span class="mw-page-title-main">Turpentine</span> Liquid distilled from pine resin

Turpentine is a fluid obtained by the distillation of resin harvested from living trees, mainly pines. Mainly used as a specialized solvent, it is also a source of material for organic syntheses.

<span class="mw-page-title-main">Copal</span>

Copal is tree resin, particularly the aromatic resins from the copal tree Protium copal (Burseraceae) used by the cultures of pre-Columbian Mesoamerica as ceremonially burned incense and for other purposes. More generally, copal includes resinous substances in an intermediate stage of polymerization and hardening between "gummier" resins and amber. Copal that is partly mineralized is known as copaline.

<span class="mw-page-title-main">Varnish</span> Transparent hard protective finish or film

Varnish is a clear transparent hard protective coating or film. It is not a stain. It usually has a yellowish shade from the manufacturing process and materials used, but it may also be pigmented as desired, and is sold commercially in various shades.

<span class="mw-page-title-main">Lacquer</span> Liquid or powder coating material which is applied thinly to objects to form a hard finish

Lacquer is a type of hard and usually shiny coating or finish applied to materials such as wood or metal. It is most often made from resin extracted from trees and waxes and has been in use since antiquity.

<span class="mw-page-title-main">Rosin</span> Solid form of resin

Rosin, also called colophony or Greek pitch, is a solid form of resin obtained from pines and some other plants, mostly conifers, produced by heating fresh liquid resin to vaporize the volatile liquid terpene components. It is semi-transparent and varies in color from yellow to black. At room temperature rosin is brittle, but it melts at stove-top temperature. It chiefly consists of various resin acids, especially abietic acid. The term colophony comes from colophonia resina, Latin for "resin from Colophon", an ancient Ionic city.

<span class="mw-page-title-main">Balsam</span> Index of plants with the same common name

Balsam is the resinous exudate which forms on certain kinds of trees and shrubs. Balsam owes its name to the biblical Balm of Gilead.

<span class="mw-page-title-main">Dammar gum</span> Tree resin obtained from the family Dipterocarpaceae

Dammar, also called dammar gum, or damar gum, is a resin obtained from the tree family Dipterocarpaceae in India and Southeast Asia, principally those of the genera Shorea or Hopea. The resin of some species of Canarium may also called dammar. Most is produced by tapping trees; however, some is collected in fossilised form on the ground. The gum varies in colour from clear to pale yellow, while the fossilised form is grey-brown. Dammar gum is a triterpenoid resin, containing many triterpenes and their oxidation products. Many of them are low molecular weight compounds, but dammar also contains a polymeric fraction, composed of polycadinene. The name dammar is a Malay word meaning ‘resin’ or ‘torch made from resin’.

<span class="mw-page-title-main">Onycha</span> Unknown biblical substance used in incense

Onycha, along with equal parts of stacte, galbanum, and frankincense, was one of the components of the consecrated Ketoret (incense) which appears in the Torah book of Exodus (Ex.30:34-36) and was used in the Jerusalem's Solomon's Temple. This formula was to be incorporated as an incense, and was not to be duplicated for non-sacred use. What the onycha of antiquity actually was cannot be determined with certainty. The original Hebrew word used for this component of the ketoret was שחלת, shecheleth, which means "to roar; as a lion " or “peeling off by concussion of sound." Shecheleth is related to the Syriac shehelta which is translated as “a tear, distillation, or exudation.” In Aramaic, the root SHCHL signifies “retrieve.” When the Torah was translated into Greek the Greek word “onycha” ονυξ, which means "fingernail" or "claw," was substituted for shecheleth.

<span class="mw-page-title-main">French polish</span> Wood finishing technique

French polishing is a wood finishing technique that results in a very high gloss surface, with a deep colour and chatoyancy. French polishing consists of applying many thin coats of shellac dissolved in denatured alcohol using a rubbing pad lubricated with one of a variety of oils. The rubbing pad is made of absorbent cotton or wool cloth wadding inside of a piece of fabric and is commonly referred to as a fad, also called a rubber, tampon, or muñeca.

<span class="mw-page-title-main">Kauri gum</span> Resin

Kauri gum is resin from kauri trees, which historically had several important industrial uses. It can also be used to make crafts such as jewellery. Kauri forests once covered much of the North Island of New Zealand, before the arrival of people caused deforestation, causing several areas to revert to sand dunes, scrubs, and swamps. Even afterwards, ancient kauri fields continued to provide a source for the gum and the remaining forests.

<i>Hymenaea courbaril</i> Species of plant

Hymenaea courbaril, the courbaril or West Indian locust, is a tree common in the Caribbean, Central America, and South America. It is a hardwood that is used for furniture, flooring, and decoration. Its hard fruit pods have edible dry pulp surrounding the seeds. Its sap, called animé, is used for incense, perfume, and varnish.

<span class="mw-page-title-main">Incense in India</span>

In India, incense sticks, called Agarbatti, are a large part of the economy and many religions in the region.

<i>Styrax benzoin</i> Species of tree

Styrax benzoin is a species of tree native to Sumatra in Indonesia. Common names for the tree include gum benjamin tree, loban (in Arabic), kemenyan (in Indonesia and Malaysia), onycha, and Sumatra benzoin tree.

<span class="mw-page-title-main">Mastic (plant resin)</span> Resin traditionally obtained from the mastic tree on the island of Chios

Mastic is a resin obtained from the mastic tree. It is also known as tears of Chios, being traditionally produced on the island Chios, and, like other natural resins, is produced in "tears" or droplets.

The conservation and restoration of lacquerware prevents and mitigates deterioration or damage to objects made with lacquer. The two main types of lacquer are Asian, made with sap from the Urushi tree, and European, made with a variety of shellac and natural resins. Lacquer can be damaged by age, light, water, temperature, or damaged substrate.

References

  1. Galbraith: Mackinnon and east Africa, Cambridge, 1972
  2. 1 2 Aber, Susan Ward, "Copal: An Immature and Controversial Resin". Emporia State University, 16 January 2004.
  3. Forestry Department. "Non-wood Forest Products for Rural Income and Sustainable Forestry – 4. Hard resins Archived 2013-08-31 at the Wayback Machine ". FAO, n.d. Web. 6 Dec. 2015.
  4. "Gum Copal Indonesia". PT Naval Overseas, n.d. Web. 4 Dec. 2015.