HG 85 fragmentation grenade | |
---|---|
Type | Hand grenade |
Place of origin | Switzerland |
Service history | |
Used by | Netherlands, Switzerland, United Kingdom |
Production history | |
Designer | Munitionsfabrik Altdorf, today RUAG |
Designed | 1985 |
Produced | 1985–present |
Specifications | |
Mass | 465 g (16.4 oz) [1] |
Length | 97 mm (3.8 in) [1] |
Diameter | 65 mm (2.6 in) [1] |
Filling | RDX / TNT (55/45%) |
Filling weight | 155 g (5.5 oz) [1] |
Detonation mechanism | Time Fuse |
The HG 85 (Hand Granate M1985) is a round fragmentation hand grenade designed for the Swiss Armed Forces, and is still produced by RUAG Ammotec in Switzerland. HG 85 is the internal designation of the Swiss Army and replaced the HG 43 from World War II.
On detonation, the steel body containing 155 g (5.5 oz) of TNT releases around 1,800 fragments, weighing on average 0.1 g (0.0035 oz). UK grenade range safety data suggests the L109 (see-Variants ) and by extension all live versions – may represent a danger at ranges up to 200 m (220 yd). [2] It is primarily intended for use during fighting in built-up areas, trench clearing, and wood clearing. It is effective against unprotected personnel up to 10 m (33 ft) away, and protected personnel up to 5 m (16 ft).
The design of the grenade was made by the federal Munitionsfabrik Altdorf (MF+A) which became SM Schweizerische Munitionsfabrik and later RUAG Ammotech. The initial detonator was supplied by Diehl (Germany) and later on manufactured under licence in Switzerland. The explosive was supplied from Germany. [3]
The grenade is spherical with a bushing on the top threaded internally to accept the DM 82 CH fuze mechanism. [4] Due to its specially constructed fuze and packaging, the grenade is considered very secure. It is designed to be effective against opponents wearing body armor, up to 20 layers of Kevlar and 1.6 mm (0.063 in) of titanium. [5]
A supplementary spring steel safety clip is clipped over the safety lever and bushing on top of the grenade preventing the safety lever from moving.
In the Swiss Army there is a training hand grenade with nearly the same size TNT charge (120–155 g (4.2–5.5 oz)), but no shrapnel mantle. It is designated EUHG 85 for Explosiv-Übungshandgranate (explosive training hand grenade). They are the same size, shape and weight, made up by adding iron powder, as the HG 85, and painted a coarse black. They are stamped "EXPLOSIV". They function in the same way as the HG 85. Due to the substantial explosive charge they are dangerous. The grenade housing, especially the fuze block, causes some fragmentation.
Initial training in the Swiss Army is done with a Markier Handgranate 85. [6] It is equal in size and shape to the HG 85, but contains no explosive charge. A small bang charge can be inserted by unscrewing the upper part (where the fuze and lever are). Releasing the lever ("spoon") activates a striker that fires the charge to produce a bang. This is used for training purposes especially when there is OpFor to simulate an explosion but not endanger anyone. The Mark HG 85 can be recovered and reloaded with another banger.
The Manip HG (for manipulation) is used for learning the basic movements and practicing throwing hand grenades in the Swiss Army. It is the same size and shape as a real HG 85, but with no moving parts. It is produced as a solid polymer block and painted bright orange, for easy recovery in the field. The first picture link below shows both Manip and EUHG 85.
In September 2000, a six-year contract with Swiss Ammunition Enterprise Corporation (a RUAG subsidiary) was announced, committing the UK to purchase around 363,000 grenades for combat and live training, first deliveries scheduled for March 2001.
The L109 is the British designation for the HG 85. It differs from the HG 85 in that it has a special safety clip (matte black in color, which is similar to the safety clip on the American M67 grenade. [7]
The L109 is deep bronze green in color with golden yellow stenciling, and a rough exterior comparable to light sandpaper, and a yellow band around the top bushing, and weighs 465 g (16.4 oz). [7] Markings give the designation "GREN HAND HE L109A1", a manufacturer marking "SM" meaning "Swiss Munitions", and a lot number. (Markings on the safety lever give the designation and lot number of the fuze.)
Once the safety pin is pulled the grenade is armed, but so long as the fly-off lever is kept depressed while the grenade is held (and the grenade can be held indefinitely with the pin out) it can be safely returned to storage so long as the fly-off safety lever is still in the closed position and the safety pin reinserted. However, if thrown – or the lever allowed to rise – the protective plastic cover falls away and the striker, under pressure of the striker spring, begins to rotate on its axis. This causes the safety lever to be thrown clear, the striker continues to rotate until it hits the percussion cap, which fires and ignites the delay pellet. The heat of the burning delay pellet melts solder holding a retaining ring, allowing the detonator to move under the influence of a spring from the safe to armed position. The delay pellet continues to burn and after between 3 and 4 seconds burns out and produces a flash that forces aside a flap valve allowing ignition. When the flash reaches the detonator this initiates a booster charge which in turn initiates the main explosive filling.
The L110 (Drill Grenade) is an entirely inert (no explosive content) version of the L109.
Identical in size, weight and shape, as the live grenade and is used for training purposes, specifically correct handling and throwing. It can be easily distinguished from the live grenade as it is dark blue with white markings [8] (see below).
The body is solid aluminum with a textured plastic coating made in the same form as the live grenade, the textured coating ensuring a good gripping surface. A hole drilled up from the bottom indicates an empty store as well as ensuring the drill grenade is of the same weight as a live grenade. A bushing on top of the grenade has a dummy fuze mechanism permanently attached with a slot for the pull ring to clip into to prevent it being accidentally pulled. The fuze mechanism, under the plastic cover is very similar in appearance to the American fuze mechanisms. Internally there is an extension on the striker to allow it to be re-cocked during training and there is a leaf spring safety that clips around the safety lever and neck of the grenade preventing the lever from rotating even if the safety pin is pulled.
The markings are 'GREN HAND INERT DRILL L110A1' and a manufacturers marking "SM" meaning Swiss Munitions. The fuze mechanism is marked on the wide bottom portion of the lever "HG2 DM 82 CH".
This practice grenade has a small simulation charge (flash/bang) that imitates a live grenade for training purposes. It is distinguishable from the wholly inert L110 by being a much lighter blue and is fitted with a distinctive gold/orange plastic cap and safety lever. [9]
The body of the L111A1 is made of steel, is covered in a textured plastic material and has the word 'PRACTICE' embossed near the top of the body, near a top portion which is larger than the bushing on the live grenade. Like the L110 there is a large aperture in the bottom of the grenade which demonstrates it is not a live grenade, but in the L111A this aperture allow gas from the practice fuse to escape. Consisting of two parts, a grey reusable striker mechanism and an L162 practice fuse (which has a blue body with a brown base and is fitted with a silver washer) the practice fuse is fitted into the bottom of the reusable striker mechanism then the entire assembly is screwed into the top of the grenade. In this version the safety lever is attached by a plastic strap to prevent loss, the entire unit, apart from the expended L162 practice fuse, being reused.
Markings, again in white, include 'GREN HAND PRAC L111A1', a manufacturers mark 'SM' meaning Swiss Munitions, and a lot number.
The Nr300 is the Dutch designation for the HG 85. It is exactly like the L109. There is also the Nr330. [10] [11]
Offensive grenade, painted black with a yellow band around the neck. OHG92's were produced for export only. It solely relies on its explosive power, and doesn't have a steel fragmentation liner. For this reason, it has no armour piercing capability. [12]
This section's tone or style may not reflect the encyclopedic tone used on Wikipedia.(March 2023) |
The HG 85 entered service in the Swiss Army in 1985. It is also used in some other European armies and also in the Middle and Far East.
A firing pin or striker is a part of the firing mechanism of a firearm that impacts the primer in the base of a cartridge and causes it to fire. In firearms terminology, a striker is a particular type of firing pin where a compressed spring acts directly on the firing pin to provide the impact force rather than it being struck by a hammer.
The Gammon bomb, officially known as the No. 82 grenade was a British hand grenade used during World War II.
The British No. 69 was a hand grenade developed and used during the Second World War. It was adopted into service due to the need for a grenade with smaller destructive radius than the No. 36M "Mills bomb". This allowed the thrower to use a grenade even when there was little in the way of defensive cover. In contrast, the much greater destructive radius of the Mills bomb than its throwing range forced users to choose their throwing point carefully, in order to ensure that they would not be wounded by the shrapnel explosion of their own grenade.
The Soviet F-1 hand grenade is an anti-personnel fragmentation defensive grenade. It is based on the French F1 grenade and contains a 60 g (2.1 oz) explosive charge (TNT). The total weight of the grenade with the fuze is about 600 g (21 oz).
The RGD-5 is a post–World War II Soviet anti-personnel fragmentation grenade, designed in the early 1950s. The RGD-5 was accepted into service with the Soviet Army in 1954. It was widely exported, and is still in service with many armies in the Middle East and the former Soviet bloc.
The M67 grenade is a fragmentation hand grenade used by the United States military. The M67 is a further development of the M33 grenade, itself a replacement for the M26-series grenades used during the Korean and Vietnam Wars, and the older Mk 2 "pineapple" grenade used since World War I.
The Mk 2 grenade, also nicknamed the Pineapple is a fragmentation-type anti-personnel hand grenade introduced by the U.S. armed forces in 1918. It was the standard issue anti-personnel grenade used during World War II, and also saw limited service in later conflicts, including the Korean War and Vietnam War. Replacing the failed Mk 1 grenade of 1917, it was standardized in 1920 as the Mk II, and redesignated the Mk 2 on April 2, 1945.
The Soviet RGD-33 is an anti-personnel fragmentation stick grenade developed in 1933.
The M26 is a fragmentation hand grenade developed by the United States military. It entered service around 1952 and was used in combat during the Korean War. Its distinct lemon shape led it to being nicknamed the "lemon grenade".
The military of the United States has used many different types of hand grenades since its foundation.
The MK3 hand grenade is a cylindrical concussion grenade designed to produce casualties during close combat while minimizing danger to friendly personnel exposed in the open owing to minimal fragmentation. There is a secondary fragmentation hazard though from rocks, gravel, wood splinters, glass, etc. The grenade is also used for concussion effects in enclosed areas, for blasting, or for demolition tasks. The shock waves (overpressure) produced by this grenade when used in enclosed areas are greater than those produced by the fragmentation grenade. It is, therefore, very effective used in an offensive role against enemy soldiers located in bunkers, buildings, and fortified areas. It is commonly known as the "concussion" or "demo" grenade.
The F1 grenade is manufactured by Thales Australia exclusively for the Australian Defence Force as a primary defensive anti-personnel hand grenade.
In military munitions, a fuze is the part of the device that initiates its function. In some applications, such as torpedoes, a fuze may be identified by function as the exploder. The relative complexity of even the earliest fuze designs can be seen in cutaway diagrams.
A grenade is an explosive weapon typically thrown by hand, but can also refer to a shell shot from the muzzle of a rifle or a grenade launcher. A modern hand grenade generally consists of an explosive charge ("filler"), a detonator mechanism, an internal striker to trigger the detonator, an arming safety secured by a transport safety. The user removes the transport safety before throwing, and once the grenade leaves the hand the arming safety gets released, allowing the striker to trigger a primer that ignites a fuze, which burns down to the detonator and explodes the main charge.
The Mk 1 grenade is a fragmentation hand grenade used by American forces during World War I. According to its designers, it was to be the "simplest", yet most "fool-proof", grenade ever made. However, some major problems appeared when the grenade was used in the field. It was retired from service before the war ended, replaced in 1918 with the improved Mk 2 grenade used through World War II.
The Model 1914 grenade is a Russian stick concussion grenade that was used during World War I and World War II.
The OTO Mod. 35 was a hand grenade issued to the Regio Esercito during World War II.
The SRCM Mod. 35 is a hand grenade that was first issued to the Royal Italian Army in 1935, serving through World War II and into the 1980s. Nicknamed "Red Devils" by the British in 1941–1942 during the North African Campaign after the red color of the most common type.
The SFG 87 is a defensive fragmentation hand grenade created in Singapore. It is one of the grenades used for infantry divisions of the Singapore Armed Forces. The grenades are produced mainly by Singaporean weapons manufacturer ST Kinetics. It has been mass-produced since 1987, replacing the older SFG 82 and SFG 75 variants.