| Hamilton H-18 | |
|---|---|
 | |
| Role | All-metal, four/five passenger and mail aircraft |
| National origin | USA |
| Manufacturer | Hamilton Aero Manufacturing Co. |
| Designer | James Smith McDonnell and James Cowling |
| First flight | 2 April 1927 |
| Number built | 1 |
The Hamilton H-18 was a 1920s US four/five passenger aircraft. An early all-metal design, it reflected Junkers and Stout design practices. Though it won safety and efficiency awards only one was built.
The Hamilton H-18 was an early all-metal commercial US aircraft. Its chief designer was James Smith McDonnell who had previously worked on the Stout 3-AT with its chief designer William Bushnell Stout. Stout had brought Hugo Junkers' methods and experiences of all-metal aircraft construction from Germany to the US during and after World War I and designed the 1924 Stout 2-AT, used for the first scheduled commercial passenger flights in the US. [1] [2]
The H-18's cantilever shoulder wing was tetragonal in plan and was based on three spars. Very thick at the root, it thinned outboard. Like the rest of the H-18, the wings were covered with corrugated metal, Junkers-style, apart from the roots which had Cellon windows in their leading edges and underside. They were bolted onto fuselage wing stubs with their upper surfaces level with its top. [3] [4] [5]
It was powered by a 220 hp (160 kW) Wright Whirlwind J-5 radial engine mounted in the nose with its nine cylinders exposed for cooling. Behind it, the fuselage had an elliptical cross-section. The pilots' side-by-side cockpit, placed over the wing, was completely enclosed but both top and sides could be opened to improve bad weather visibility. The root windows provided a downward view. The second seat could be fitted with dual controls if required or accommodate an extra passenger. Four passengers were seated within the windowless fuselage with the seats placed directly against the open wing roots in the cabin sides so that the occupants had a downward view through the root windows as well as extra elbow room. There was a port-side door for entry to the cabin, which could also be entered via an opening root window or the cockpit. At the rear of the cabin there was a 70 cu ft (2.0 m3) enclosure for luggage or post. [3] [4]
Its tail was angular and had a steel tube structure, again covered with corrugated dural. The fin had a cropped triangular profile and a rectangular rudder. Its rectangular plan tailplane was mounted on top of the fuselage and was externally braced with an upper, single strut to the fin and an underside pair to the fuselage. The elevator also had a rectangular plan apart from large cut-outs for rudder movement. [3] [5]
The H-18's fixed, robust conventional landing gear was designed for bumpy fields, with a wide (9 ft (2.7 m)) track. Its large diameter wheels, fitted with brakes, were on a centrally hinged split axle held between main legs with oleo shock absorbers and near-horizontal drag struts. [3] [4] [5]
For some time this wheeled gear was replaced by floats. [6]
The first flight was made on 2 April 1927 and shortly afterwards the prototype was named the Maiden Milwaukee. At the end of the month it was flown to Washington D.C. where it was on display at the Pan American Aero Congress. [5]
In 1927 it took part in the National Reliability Tour. Flown by Randolph Page, it won the second prize of $2,000. In September, flown by John H. Miller it gained second prize at the National Air Races held at Spokane. It also gained prizes for efficiency (first place) and speed (third) in the Detroit News Air Transport Race and first prize for efficiency in an Aviation Town & Country Club of Detroit Trophy contest. These later events brought $1,850 in winnings. [5]
Despite the safety and efficiency awards the H-18 did not sell and only the prototype was built. [5] By 1929 it had been converted by Jesse C. Johnson into an unusual rotary wing type with a 18 ft (5.5 m) driven rotor under each wing. [6] [7] [8] After a string of all-metal prototypes, McDonnell's 1928 H-45 and H-47 used a thinner, externally braced wing, more powerful engines, had two more seats in a side-windowed cabin and were much more successful. [5] [9]
Data from Aero Digest, August 1927 [4]
General characteristics
Performance
The Aero A.23 was a Czechoslovakian airliner of the 1920s. Aero Vodochody had produced the first Czech airliner, the A.10, four of which had served with ČSA, the national airline. The A.23, another biplane, was bigger, more powerful and could carry more passengers.
The Cunningham-Hall Model PT-6 was an American six-seat cabin biplane aircraft of the late 1920s and was the first design of the Cunningham-Hall Aircraft Corporation of Rochester, New York.
The PWS-20 was a Polish single-engine high-wing passenger aircraft for 6 passengers, built in PWS factory in 1929, that remained a prototype. It was the first Polish passenger plane.
The Latécoère 14 and Latécoère 16 were similar French passenger and postal aircraft of advanced design built in 1923. They differed chiefly in engine power. Only one of each was constructed. The 14's type number was reused for an unrelated parasol wing prototype that was basis of the more successful Latécoère 17.
The Latécoère 4 was a three-engined, 15-passenger biplane built in France in the early 1920s. It proved difficult to fly and was discontinued, though a second machine was completed as the Latécoère 5 bomber.
The Capella XS is a family of American high wing, tractor configuration, cabin aircraft that were produced in kit form by Capella Aircraft of Austin, Texas and intended for amateur construction.
The Junkers J 15 was an all-metal monoplane built in Germany in 1920 to explore the design parameters of small single-engined passenger transports. In particular, it could fly in either high or low wing configurations. It led to the Junkers J 16 light airliner.
The Junkers T 19, originally known as the J 19, was a single-engined parasol winged all-metal 2/3-seat aircraft built in Germany in the early 1920s for training and touring. Its construction was too expensive for commercial success and only three were built, one later finding use as an engine test-bed.
The Bellanca CF is an early enclosed high-wing monoplane designed by Giuseppe Mario Bellanca that led to a successful series of Bellanca aircraft. Bellanca was nominated for the Collier Trophy in 1922 for the CF design.
The Dyle et Bacalan DB-70 was a large three engine French airliner with a thick airfoil centre section which accommodated the passengers. Two fuselages, part of the centre section at the front but distinct further aft, carried the empennage. First flown in 1929, only one was built.
The CANT Z.1010 was a single engine, five seat Italian passenger aircraft flown in the mid-1930s. Only one was built.
The Potez 38 was a French single engine, eight or nine seat passenger aircraft flown in 1930. Only one was built.
The Caudron C.25 was a large, three engined, biplane airliner, designed and built in France soon after the end of World War I. Its enclosed cabin could accommodate up to eighteen passengers.
The Botali P.A.M.A or Botali-du Rivau P.A.M.A. Type 1 was a very low power French single seat aircraft built in 1934 to a target price of 20,000 Francs.
The Albatros L 83 Adler was a small, fast transport aircraft for passengers, mail or other cargo, flown in Germany in 1931. Two were built.
The Dewoitine 14 was a mid-1920s French civil transport, capable of carrying mixture of passengers and freight. The sole example was used in commercial trials.
The Hanriot H.25 was a French, single-engined, six passenger airliner built in 1926. Only one was flown.
The Działowski D.K.D.1 was the first powered aircraft designed by Stanislaw Działowski. It was a low-power high-wing monoplane with a cabin for one passenger. After attending an aviation exhibition in Warsaw in 1927 it was badly damaged when the engine failed as it left and it did not fly again.
The LFV V 18 Sassnitz was a German flying boat able to hold up to eight passengers. Only one is known to have flown.
The Western Airplane King Bird, named after the tyrant flycatcher (Western) Kingbird, was a 1920s US civil transport accommodating three passengers in open cockpits. Only one was built.