Hillman Husky

Last updated
Hillman Husky (Minx based)
Hillman husky mark1.jpg
Overview
Manufacturer Hillman (Rootes Group)
Production1954–1957
Body and chassis
Body style three-door estate
Related Hillman Minx
Commer Cob
Powertrain
Engine 1,265 cc (77.2 cu in) straight-4
Transmission 4-speed manual [1]
Dimensions
Wheelbase 84 in (2,134 mm) [2]
Length148 in (3,759 mm) [3]
Width63.25 in (1,607 mm) [3]
Height61 in (1,549 mm) [3]
Curb weight 1,904 lb (864 kg)
Chronology
SuccessorHillman Husky (Audax based)

The Hillman Husky was a line of British passenger vehicles manufactured between 1954 and 1970 by Hillman.

Contents

Original Hillman Husky ("Mark 1")

The first (or "Mark 1") Hillman Husky, introduced in 1954, was a small estate based on the contemporary "Mark VIII" Hillman Minx. The two-door Husky entered the range alongside an existing Minx estate car, which had a 9-inch (230 mm) longer wheelbase. The Husky was not a hatchback, having instead a single side-hinged rear door. While the new Mark VIII Minx DeLuxe saloon, convertible and "Californian" hardtop used a new OHV 1,390 cc (85 cu in) engine, the Husky continued to use the older 1,265 cc (77.2 cu in)35 bhp (26 kW) sidevalve engine with single Zenith carburettor which it shared with the Minx "Special" saloon and estate. Unlike the Minx with its column change, the gear lever for the Husky was floor mounted.

There were individual seats in front and a bench seat in the rear which would fold flat to increase load area. The trim material was leathercloth. Both the heater and radio were optional extras. The car was available in blue, grey, green or sand paint (1954 colours).

42,000 of this Husky were sold until the model was replaced in 1958 (a year after the "parent" Minx was itself replaced). [4]

The Motor magazine tested a Husky in 1954 and found it to have a top speed of 65 mph (105 km/h) and acceleration from 0-50 mph (80 km/h) in 24.3 seconds. A fuel consumption of 33.4 miles per imperial gallon (8.5 L/100 km; 27.8 mpgUS) was recorded. The test car cost £564 including taxes. [3]

"Audax Series" Hillman Husky

Hillman Husky (Minx "Audax" based)
Hillman Husky Series I front.jpg
Hillman Husky Series I
Overview
Manufacturer Hillman (Rootes Group)
Production1958–1965
Body and chassis
Body style Three-door estate
Related Hillman Minx
Commer Cob
Powertrain
Engine 1,390 cc (85 cu in) straight-4
Dimensions
Wheelbase 86 in (2,184 mm) [2]
Length149.5 in (3,797 mm)
Width60.5 in (1,537 mm)
Height60 in (1,524 mm) [5]
Curb weight 2,072 lb (940 kg) (Ser I & III)
(2,100 lb (953 kg) (Ser II)
Chronology
PredecessorHillman Husky (Minx based)
SuccessorHillman Husky (Imp based)

Series I

In 1958 the new "Series I" Husky was introduced. It followed the same formula as its predecessor, but was based on the new "Audax" or "Series" Hillman Minx. This time the engine was the new Minx's 1390 cc overhead-valve unit but de-rated to an output of 51 hp (38 kW; 52 PS). [5] As before, there was also a four-door "Minx estate", and the Husky had two doors (plus the side-hinged rear door) and a shorter wheelbase (by 8 inches (200 mm)). It was, however, 2 inches (51 mm) longer than its predecessor.

Again Commer sold a panel van version of the same vehicle as the Commer Cob.

Series II

A "Series II" Husky followed in 1960 with a four-speed gearbox, slightly lowered roof, a deeper windscreen, and altered seats. The engine compression ratio was raised to 8:1 and the carburettor changed to a Zenith 30 VIG type.

Testing the Husky in 1960, The Motor magazine recorded a top speed of 73.4 mph (118.1 km/h), acceleration from 0-60 mph (97 km/h) of 26.9 seconds and a fuel consumption of 30.8 miles per imperial gallon (9.2 L/100 km; 25.6 mpgUS). The test car cost £674 including taxes. [5]

Series III

The final iteration of the "Audax" Hillman Husky, the "Series III", made its debut in 1963, along with a face-lift for the whole Minx range (and its badge-engineered derivatives). The face-lift bodywork changes were applied to the Husky, but the reduction in wheel size from 15-inch (380 mm) to 13-inch (330 mm), which was applied to the saloons, was not applied to the Husky in order to maintain its ground clearance. In addition, whilst the contemporary Series V Minx got front disc brakes, the Husky continued with four-wheel drum brakes. While the 1390 cc engine continued to be used in most markets, for the USA the Husky adopted the 1,592 cc (97.1 cu in) engine used in the contemporary Minx Series V.

From 1964 the Husky gained an all-synchromesh gearbox and changes to the clutch and suspension. Production of the Series III ended in 1965. [4]

Hillman Imp van derivative

Hillman Husky (Imp based)
Hillman Husky front.jpg
Hillman Husky (1967-1970)
Overview
Manufacturer Hillman (Rootes Group)
Production1967–1970
Body and chassis
Body style three-door estate
Related Hillman Imp
Commer Imp Van
Powertrain
Engine 875 cc (53.4 cu in) straight-4
Transmission 4-speed manual all-synchromesh
Dimensions
Wheelbase 82 in (2,083 mm) [2]
Length141 in (3,581 mm)
Width60.25 in (1,530 mm)
Height58 in (1,473 mm)
Curb weight 1,652 lb (749 kg)
Chronology
PredecessorHillman Husky
SuccessorNone

No further Huskies were made until a new model based on the Hillman Imp appeared in April 1967. [6] This new Husky shared the Imp's rear-mounted 875 cc (53.4 cu in) overhead camshaft engine, and had slightly better performance than the Imp, being approximately 330 lb (150 kg) lighter. [7] The same engine was also adopted by the Bond 875.

Like the earlier van version, the "Imp estate" was based on the two-door car, with the roof raised by 4 inches (100 mm) to provide a large carrying space above the engine bay, giving the car a square boxy look. The unusually flat roof was reinforced with stiffening ribs and supported on the inside of the vehicle with "synthetic foam noise-deadening material". [6] When compared to the Commer badged panel van from which it derived, the Husky body also had extra stiffening at the rear window apertures. [6]

Loading access was by a vertical top-hinged rear tailgate with the bottom of the opening level with the floor, making it easy to load without stooping down. Sliding windows gave ventilation and a view out from the rear bench seat. The top part of the back seat squab folded forward forming a useful horizontal loading platform with a ribbed rubber surface, and 50 cubic feet (1.4 m3) of capacity. To take the increased load, this was the first Hillman derivative to have radial-ply tyres. It also had uprated rear shock absorbers and rear springs were fitted along with a strengthened rear suspension. These gave the Husky more sporty handling that the standard Imp, and looked surprising when this tall vehicle went quickly round a corner with very little roll. [8]

Once more Commer sold a commercial version of the same car, the van version which was launched in 1965 [9] and had the engine in low-compression form. [8]

The last Husky was built in 1970, at which point Chrysler Europe, new owners of Rootes, engaged in a major rationalisation of their products.

Scale models

Related Research Articles

Ford Anglia Car model

The Ford Anglia is a compact car which was designed and manufactured by Ford UK. It is related to the Ford Prefect and the later Ford Popular. The Anglia name was applied to various models between 1939 and 1967.

Hillman British automobile marque

Hillman is a British automobile marque created by the Hillman Motor Car Company, founded in 1907. The company was based in Ryton-on-Dunsmore, near Coventry, England. Before 1907 the company had built bicycles. Newly under the control of the Rootes brothers, the Hillman company was acquired by Humber in 1928. Hillman was used as the small car marque of Humber Limited from 1931, but until 1937 Hillman did continue to sell large cars. The Rootes brothers reached a sixty per cent holding of Humber in 1932 which they retained until 1967, when Chrysler bought Rootes and bought out the other forty per cent of shareholders in Humber. The marque continued to be used under Chrysler until 1976.

Rootes Arrow car model

Rootes Arrow was the manufacturer's name for a range of cars produced under several badge-engineered marques by the Rootes Group from 1966 to 1979. It is amongst the last Rootes designs, developed with no influence from future owner Chrysler. The range is almost always referred to by the name of the most prolific model, the Hillman Hunter.

Hillman Imp automobile

The Hillman Imp is a small economy car made by the Rootes Group and its successor Chrysler Europe from 1963 until 1976. Revealed on 3 May 1963, after much advance publicity, it was the first British mass-produced car with the engine block and cylinder head cast in aluminium.

Commer Defunct British commercial vehicle manufacturer

Commer was a British manufacturer of commercial vehicles from 1905 until 1979. Commer vehicles included car-derived vans, light vans, medium to heavy commercial trucks, military vehicles and buses. The company also designed and built some of its own diesel engines for its heavy commercial vehicles.

Hillman Minx

The Hillman Minx was a mid-sized family car that British car maker Hillman produced from 1931 to 1970. There were many versions of the Minx over that period, as well as badge-engineered variants sold by Humber, Singer, and Sunbeam.

Ford Squire estate design car

The Ford Squire is a car that was produced by Ford UK from 1955 to 1959.

Triumph Herald

The Triumph Herald is a small two-door car introduced by Standard-Triumph of Coventry in 1959 and made through to 1971. The body design was by the Italian stylist Giovanni Michelotti, and the car was offered in saloon, convertible, coupé, estate and van models, with the latter marketed as the Triumph Courier.

Sunbeam Alpine Two seat automobile built 1953–1975

The Sunbeam Alpine is a two-seater sports drophead coupé produced by Rootes Group from 1953 to 1955, and then 1959 to 1968. The name was then used on a two-door fastback from 1969 to 1975. The original Alpine was launched in 1953 as the first vehicle from Sunbeam-Talbot to bear the Sunbeam name alone since Rootes Group bought Clément-Talbot, and later the moribund Sunbeam from its receiver in 1935.

Singer Gazelle

The Singer Gazelle name has been applied to two generations of motor cars from the British manufacturer Singer. It was positioned between the basic Hillman range and the more sporting Sunbeam versions.

Humber Sceptre car model

The Humber Sceptre is an automobile which was produced in the United Kingdom from 1963 to 1976 by Humber.

Sunbeam Rapier Sunbeam automobile

The Sunbeam Rapier is an automobile produced by Rootes Group from 1955 to 1976, in two different body-styles, the "Series" cars and the later (1967–76) fastback shape, part of the "Arrow" range.

Škoda 1000 MB car model

The Škoda 1000 MB and Škoda 1100 MB are two rear-engined, rear-wheel drive small family cars that were produced by Czechoslovak manufacturer AZNP in Mladá Boleslav between 1964 and 1969. The 2-door coupé versions of the 1000 MB and 1100 MB were called the 1000 MBX and 1100 MBX.

Riley Nine

The Riley Nine was one of the most successful light sporting cars produced by the British motor industry in the inter war period. It was made by the Riley company of Coventry, England with a wide range of body styles between 1926 and 1938.

The Singer Vogue name has been applied to two generations of motor cars from the British manufacturer Singer.

Humber Hawk car model

The Humber Hawk is a four-cylinder automobile manufactured from 1945 to 1967 by British-based Humber Limited.

Hillman Super Minx

The Hillman Super Minx is a family car which was produced by Hillman from 1961 to 1967. It was a slightly larger version of the Hillman Minx, from the period when the long-running Minx nameplate was applied to the "Audax" series of designs.

Hillman 14

The Hillman Fourteen is a medium-sized 4-cylinder car announced by Hillman's managing director Spencer Wilks, a son-in-law of William Hillman, at the end of September 1925. This new Fourteen substantially increased Hillman's market share and remained on sale into 1931. During this time it was the main product of the company.

Isuzu Hillman Minx

The Isuzu Hillman Minx was a series of middle-sized family cars produced by Isuzu Motors in Japan under licence from the Rootes Group between 1953 and 1964. The models were broadly equivalent to the Hillman Minx Mark VI to Mk VIII and Series 1 to Series 3A produced at the same time in the UK, although some notable divergence occurred in the later years as production became localised in Japan.

Commer FC Commer Van

The Commer FC was a commercial vehicle produced by Commer from 1960 to 1976. During its lifespan, it was developed into the Commer PB in 1967, and the Commer SpaceVan in 1974. After the Rootes Group, which owned Commer, was purchased by Chrysler, the SpaceVan was also sold under the Dodge and Fargo marques. From 1976 onwards, the van was only sold as the Dodge SpaceVan, and it remained in production until 1983.

References

  1. "Second Hand car guide supplement". Practical Motorist. 6 Nbr 68: between pages 768 & 769. April 1960.
  2. 1 2 3 Culshaw; Horrobin (1974). Complete Catalogue of British Cars. London: Macmillan. ISBN   0-333-16689-2.
  3. 1 2 3 4 "The Hillman Husky". The Motor . December 29, 1954.
  4. 1 2 Robson, G. (2006). A-Z of British Cars 1945-1980 . Devon, UK: Herridge Books. ISBN   0-9541063-9-3.
  5. 1 2 3 "The Hillman Husky Series 2". The Motor . March 16, 1960.
  6. 1 2 3 "Hillman Husky reborn". Autocar . Vol. 126 (nbr 3714). 22 April 1967. p. 24.
  7. Hillman Husky, Autocar 1967 - The Imp Site
  8. 1 2 Hillman Husky 1967-'70 - The Imp Site
  9. "Development of the Hillman Imp cars". Archived from the original on 2007-02-04. Retrieved 2007-08-06.
  10. 1 2 Ramsey, John. The Swapmeet and Toyfair Catalogue of British Diecast Model Toys. Swapmeet Toys and Models Ltd. p. 138. ISBN   095093190X.