Hired armed cutter Hirondelle

Last updated

His Majesty's hired armed cutter Hirondelle served the British Royal Navy under contract between 23 March 1801 and 19 October 1801. She was of 169394 tons (bm), and carried two 4-pounder guns and ten 12-pounder carronades. [1]

Lieutenant Gustavus Stupart was appointed to command of Hirondelle on 23 March 1801, and was stationed in the Channel. He served on her until November. Although the contract reportedly ended in October, on 24 November she departed Plymouth Sound for Jersey. [2]

On 15 May 1801 Fisgard, Hirondelle, and the hired armed cutter Earl Spencer, recaptured the brig Victory from the French. [3]

On 8 August Hirondelle captured two French brigs. She shared the prize money with Amelia. [4] One was Adelaide, but the other's name remains unknown. [5]

Twenty days later Hirondelle captured the Tres Jeunes Amis. [6] The prize money notice refers to "His Majesty's Ship Hirondelle", however, at the time Hirondelle was the only vessel by that name serving the Royal Navy.

Citations

  1. Winfield (20080, p.390.
  2. Naval Chronicle, Vol. 12, p.432.
  3. "No. 15412". The London Gazette . 29 September 1801. p. 1203.
  4. "No. 15456". The London Gazette . 23 February 1802. p. 205.
  5. "No. 15563". The London Gazette . 1 March 1803. p. 232.
  6. "No. 15495". The London Gazette . 6 July 1802. p. 725.

Related Research Articles

HMS <i>Glatton</i> (1795) British ship of the line (1792–1830)

HMS Glatton was a 56-gun fourth rate of the Royal Navy. Wells & Co. of Blackwell launched her on 29 November 1792 for the British East India Company (EIC) as the East Indiaman Glatton. The Royal Navy bought her in 1795 and converted her into a warship. Glatton was unusual in that for a time she was the only ship-of-the-line that the Royal Navy had armed exclusively with carronades. She served in the North Sea and the Baltic, and as a transport for convicts to Australia. She then returned to naval service in the Mediterranean. After the end of the Napoleonic Wars the Admiralty converted her to a water depot at Sheerness. In 1830 the Admiralty converted Glatton to a breakwater and sank her at Harwich.

HMS <i>Sirius</i> (1797) Frigate of the Royal Navy

HMS Sirius was a 36-gun fifth-rate frigate of the Royal Navy. Between 1797 and 1805, the Sirius was engaged in maintaining the blockade of Napoleonic Europe. She was lost in 1810 when her crew scuttled her after she grounded during the Battle of Grand Port.

HM hired brig Telegraph was built in 1798 and served on contract to the Royal Navy from 10 November. During the French Revolutionary Wars she took several prizes and was the victor in one notable ship action before she was lost at sea with all hands in 1801.

During the French Revolutionary and Napoleonic Wars the British Royal Navy made use of hired armed vessels, one of which was His Majesty's hired armed cutter Nimrod. Three such vessels are recorded, but the descriptions of these vessels and the dates of their service are such that they may well represent one vessel under successive contracts. The vessel or vessels cruised, blockaded, carried despatches, and performed reconnaissance.

The hired armed cutter Black Joke was a cutter that served the Royal Navy from 12 January 1795 to 19 October 1801. In 1799 she was renamed Suworow, and under that name she captured numerous prizes before she was paid off after the Treaty of Amiens.

During the French Revolutionary and Napoleonic Wars the Admiralty also made use of hired armed vessels, one of which was His Majesty's Hired armed cutter Swan. Actually there were two such cutters, but the descriptions of these vessels and the dates of their service are such that they may well represent one vessel under successive contracts. The vessel or vessels cruised, blockaded, carried despatches and performed reconnaissance.

During the French Revolutionary and Napoleonic Wars the Royal Navy used several vessels that bore the designation His Majesty's hired armed cutter Lord Nelson, all named for Lord Horatio Nelson.

The British Royal Navy employed two vessels described as His Majesty's hired armed cutter Kent, the first during the French Revolutionary Wars, and the second during the Napoleonic Wars.

The Royal Navy used several vessels that were described as His Majesty's hired armed cutter King George. Some of these may have been the same vessel on repeat contract.

His Majesty's hired armed lugger Lark served the Royal Navy from 3 January 1799 to 6 November 1801. She was armed with two 4-pounder guns and twelve 12-pounder carronades. She had a burthen of 1701394 tons (bm), and a crew of 50 men and boys. At the end of her contract the Admiralty returned her to her owners.

His Majesty's hired armed cutter Courier appears twice in the records of the British Royal Navy. The size and armament suggests that both contracts could represent the same vessel, but other information indicates that the second Courier had been captured from the French in the West Indies. On the first contract the captain and crew were awarded clasps to the Naval General Service Medal, one for a boat action and one for a single ship action in which they distinguished themselves.

During the period of the French Revolutionary and Napoleonic Wars, there were two or three vessels known as His Majesty's hired armed cutter Active that served the British Royal Navy. The reason for the uncertainty in the number is that the size of the vessels raises the possibility that the first and second may have been the same vessel.

<span class="mw-page-title-main">Hired armed vessels</span>

During the eighteenth and nineteenth centuries the Royal Navy made use of a considerable number of hired armed vessels. These were generally smaller vessels, often cutters and luggers, that the Navy used for duties ranging from carrying despatches and passengers to convoy escort, particularly in British coastal waters, and reconnaissance.

During the French Revolutionary and Napoleonic Wars, the British Royal Navy employed at least two cutters designated His Majesty's hired armedcutterNile.

Mutin was a 14-gun cutter of the French Navy, the lead ship of the Mutin class of five naval cutters. She was launched in 1778 and the Royal Navy captured her the next year, taking her into service as HMS Mutine. The Royal Navy renamed her HMS Pigmy in 1798. She was lost in 1805.

HMS Dolphin was 10-gun cutter that served the Royal Navy from 1793 to 1802, first as a hired armed cutter, and then after the Navy purchased her, as HMS Dolphin. During her almost decade of service Dolphin patrolled the English Channel protecting British trade by capturing French privateers and recapturing their prizes.

HMS <i>Seagull</i> (1795) Sloop of the Royal Navy

HMS Seagull, was a Royal Navy Diligence-class brig-sloop, launched in 1795. During the French Revolutionary Wars she shared in the capture of a number of small French and Dutch privateers. Then early in the Napoleonic Wars she participated in a notable single-ship action before she disappeared without a trace in 1805.

Two vessels have borne the designation, His Majesty's hired armed cutter Constitution. The first served the British Royal Navy during the French Revolutionary Wars. The second served briefly at the start of the Napoleonic Wars and was sunk in 1804. The two cutters are similar enough that may have been the same vessel; at this juncture it is impossible to know.

HMS <i>Eugenie</i> (1797) British naval sloop 1797–1803

HMS Eugenie was the French privateer Nouvelle Eugénie, launched at Nantes in 1796 that the British Royal Navy captured in 1797 and took into service. As a brig-sloop she served in the Channel, primarily escorting convoys, and was sold in 1803.

HMS Tickler was a cutter built at Dover in 1798 as the mercantile Lord Duncan. Between October 1798 and October 1801 she served the Royal Navy as the hired armed cutter Lord Duncan. Lord Duncan captured or recaptured several vessels, including one privateer. The Navy purchased Lord Duncan in October 1808 and renamed her HMS Tickler. It sold her in 1816.

References

.