Honda VT250F

Last updated
Honda VT250F
Honda vt250f.jpg
Manufacturer Honda

The Honda VT250F Integra is a semi-faired, sport bike first produced by Honda in 1982.

Contents

The VT250F had a DOHC 4-valve-per-cylinder, 90-degree water-cooled V-twin engine, which significantly reduced primary vibration when compared to inline twin engines used on similar machines. The V-twin engine also allowed the motorcycle to have a low centre of gravity and a low seat height.

The front brake system was a single inboard ventilated disc that was developed to improve brake performance and feel. This was only seen on Honda models for a few years, before a switch to sintered metal brake pads with the more traditional disc/caliper arrangement. Other features included a hydraulic clutch, Comstar wheels with tubeless tyres, TRAC anti-dive front forks and Pro-Link rear suspension. Engine coolant passed through one of the frame tubes. The early UK specification model had built-in front fairing indicators, and optional radiator side-cowls and belly pan. Following the VT250F, the VT250 Spada and VTR250 were produced. A full fairing VT250F2 was also produced to help the rider from being fatigue at high speeds it also featured double row cam chains. Later models also came with an aluminium box frame. The engine redlined at 13500 rpm. The engine also tends to heat up causing severe damage to the crankshaft bearings. It is advised to use only 10W/40 engine oil for v-twins and v-four engine motorcycles.

Specifications

Engine Two-cylinder 90° V Twin, Four-stroke
Displacement248 cc
Bore & Stroke60 mm x 44 mm
Valvetrain DOHC, 4 valves per cylinder
Compression ratio11:1
Maximum power26.1 kW (35 hp) @ 11,000 rpm
Maximum torque21.5 N⋅m (15.9 lb⋅ft) @ 10,000 rpm
StarterElectric
Cooling system Liquid-cooled
TransmissionSix speed
Drivetrain Chain
Seat Height780 mm (30.7 inch)
Fuel capacity12 litres
BrakesFront: single inboard disc
Rear: drum
Dry weight149 kg (328.5 lb)

See also

Related Research Articles

<span class="mw-page-title-main">Honda Magna</span> Type of motorcycle

The Honda Magna is a cruiser motorcycle made from 1982 to 1988 and 1994 to 2003 and was the second Honda to use their new V4 engine shared with the VF750S Sabre and a few years later a related engine was fitted to the VF750F 'Interceptor', the later models used a retuned engine from the VFR750F with fins added to the outside of the engine. The engine technology and layout was a descendant of Honda's racing V4 machines, such as the NS750 and NR750. The introduction of this engine on the Magna and the Sabre in 1982, was a milestone in the evolution of motorcycles that would culminate in 1983 with the introduction of the Interceptor V4. The V45's performance is comparable to that of Valkyries and Honda's 1800 cc V-twin cruisers. However, its mix of performance, reliability, and refinement was overshadowed by the more powerful 1,098 cc "V65" Magna in 1983.

<span class="mw-page-title-main">Honda CB750 and CR750</span> Four cylinder engine motorcycle

The Honda CB750 is an air-cooled, transverse, in-line-four-cylinder-engine motorcycle made by Honda over several generations for year models 1969–2003, plus 2007, with an upright, or standard, riding posture. It is often called the original Universal Japanese Motorcycle (UJM).

The Honda XR series is a range of four-stroke off-road motorcycles that were designed in Japan but assembled all over the world.

<span class="mw-page-title-main">Honda Valkyrie</span> Cruiser motorcycle

The Honda Valkyrie is a motorcycle that was manufactured by Honda from 1997 to 2003. It was designated GL1500C in the US market and F6C in other markets.

<span class="mw-page-title-main">Honda CX series</span> Series of motorcycles

The Honda CX series motorcycles, including the GL500 and GL650 Silver Wing variants, were developed and released by Honda in the late 1970s, with production ending in most markets by the mid 1980s. The design included innovative features and technologies that were uncommon or unused at the time such as liquid cooling, electric-only starting, low-maintenance shaft drive, modular wheels, and dual CV-type carburetors that were tuned for reduced emissions. The electronic ignition system was separate from the rest of the electrical system, but the motorcycle could only be started via the start button.

<span class="mw-page-title-main">Universal Japanese Motorcycle</span> 70s motorcycles that revolutionized the US bike market

The term "Universal Japanese Motorcycle", or UJM, was coined in the mid-1970s by Cycle Magazine to describe a proliferation of similar Japanese standard motorcycles that became commonplace following Honda's 1969 introduction of its successful CB750. The CB750 became a rough template for subsequent designs from all three of the other major Japanese motorcycle manufacturers. In 2011, the New York Times said lightning struck for Honda "with the 1969 CB 750, whose use of an inline 4-cylinder engine came to define the Universal Japanese Motorcycle."

<span class="mw-page-title-main">Yamaha XS 650</span> Yamaha motorcycle

The Yamaha XS650 is a mid-size motorcycle made by Yamaha Motor Company. The standard model was introduced in October 1969,and produced through 1979. The "Special" cruiser model was introduced in 1978 and produced through 1985. The XS650 began with the 1955 Hosk SOHC 500 twin. After about 10 years of producing 500 twin, Hosk engineers designed a 650 cc twin. Later the Hosk company was acquired by Showa Corporation, and in 1960 Yamaha had bought Showa with Hosk's early design of 650 cc twin.

<span class="mw-page-title-main">Honda VF1000</span>

The VF1000 is a range of motorcycles produced by Honda from 1984 to 1988. The VF1000 is named after its V-4 998 cc (60.9 cu in) double overhead cam 16-valve engine. There were three main models in the VF1000 range, the VF1000F, the VF1000R and the VF1000F2.

<span class="mw-page-title-main">Honda CM400</span> Type of motorcycle

The Honda CM400 is a street bike produced by the Honda Motor Company from 1979 to 1982, part of a series of motorcycles with the prefix 'CM' using various engine capacities. It was a precursor to the Honda Rebel series of motorcycles. It was equipped with electric start and electronic ignition. Models included the CM400A, CM400C (Custom), CM400E (Economy) and CM400T (Touring). The CM400C was produced only in 1981, making it one of the rarer models.

<span class="mw-page-title-main">Honda CBR600F</span> Sport bike

The Honda CBR600F is a CBR series 600 cubic centimetres inline four-cylinder sport bike motorcycle made by Honda Motorcycles. The first model of the CBR600F was sold from 1987 to 1990 and is known in the US as the Hurricane. In Austria and Mexico, a smaller version, called CBR500F, was offered. The subsequent models are designated as CBR600F2, F3, F4, and F4i respectively. In 2011, Honda released a more modern model with the same name.

<span class="mw-page-title-main">Honda X4</span> Type of motorcycle

The Honda X4 is a 1,284 cc (78.4 cu in) cruiser motorcycle produced by Honda for model years 1997 through 2003.

The Ducati SportClassics are a range of retro styled motorcycles introduced by Ducati at the 2003 Tokyo Motor Show, and put on sale in 2005 for the 2006 model year. The Paul Smart version was made for the 2006 model year only, while the Sport1000 ran from 2006 through the 2009 model years, and the GT1000 ran from the 2007 through 2010 model years.

<span class="mw-page-title-main">Honda Transalp</span> Dual-sport motorcycle

The Honda Transalp is the XL400V, XL600V, XL650V, XL700V, and XL750 series of dual-sport motorcycles manufactured in Japan by Honda since 1987. With the exception of XL750, the Transalp bikes series feature a liquid-cooled, four-stroke 52° V-twin engine.

<span class="mw-page-title-main">Honda CB600F</span> Type of motorcycle

The Honda CB600F is a street motorcycle manufactured by Honda. It is powered by a 599 cc (36.6 cu in) liquid-cooled inline-four engine, originally a detuned version of that in the Honda CBR600 sport bike, which currently produces around 102 bhp (76 kW). The 'Hornet' name was not taken to North America as AMC, and its successor, Chrysler, had trademarked the name with the AMC Hornet.

<span class="mw-page-title-main">Honda NSR50</span>

The A-AC10 Honda NSR50 is a motorcycle produced by Honda Motor Company. It was offered in a street legal format in several countries including Japan, France, Spain and more. It was also offered as a off-road use race bike variant in both Japan and the USA. The USA received it as a one year only 2004 model designated as an NSR50R. In Japan it was offered in both 2004 and 2009 as the NSR Mini.

<span class="mw-page-title-main">Honda VT250</span> Honda motorcycle

The VT250 or Spada MC20 is a Honda motorcycle built between late 1988 and the end of 1989.

<span class="mw-page-title-main">Honda VTR250</span> Type of motorcycle

The Honda VTR250 is a 90° V-twin motorcycle produced by Honda that has had one major revision. The original VTR250 was a faired sport bike sold only in the United States and Canada from 1988 to 1990. The next VTR250 model is a naked bike, produced from 1997 to 2018, available only in the Asia-Pacific region, and for 2009, Europe.

<span class="mw-page-title-main">Honda CBR1000F</span> Sport touring motorcycle

The Honda CBR1000F Hurricane is a sport touring motorcycle, part of the CBR series manufactured by Honda from 1987 to 1996 in the United States and from 1987 to 1999 in the rest of the world. It is powered by a liquid-cooled, DOHC, 998 cc (60.9 cu in), 16-valve inline-four engine. The CBR1000F, along with the CBR750F and CBR600F, was Honda's first inline four-cylinder, fully-faired sport bike.

<span class="mw-page-title-main">Honda VT500</span> Middle weight motorcycle

VT500 is a common name for the family of motorcycles sharing the Honda VT500 V-twin engine, with the cylinders set inline with the long-axis of the frame. Launched at the Cologne motorcycle show in September 1982, it was produced with various designations for different countries, such as Ascot, Shadow and Euro.

<span class="mw-page-title-main">Magni (motorcycle)</span>

Magni is an Italian company that builds specialist motorcycles. The company is based in the city of Samarate in the province of Varese. Magni, in addition to building the bikes that bear its name, is also active in the construction of specials to order and a supplier of special parts for the restoration of MV Agusta classic motorcycles.

References