Honda NT650

Last updated
Honda Hawk GT
1988HondaHawkGT-02.jpg
1988 Honda Hawk GT
Manufacturer Honda
Also calledNT650, Bros, RC31
Production1988–1992 [1]
Class Naked bike
Engine 647 cc (39.5 cu in), four-stroke, 52° V-twin
Bore / stroke 79.0 mm x 66.0 mm
Compression ratio 9.4:1
Top speed180 km/h (110 mph) [2]
Power 43 kW (58 hp) (claimed) [1]
28.0 kW (37.5 hp) (rear wheel) [1]
Torque 42 N⋅m (31 lb⋅ft) (rear wheel) [1]
Transmission 5-speed, manual, chain
Suspension F: Showa 41mm non-adjustable fork, 140 mm (5.5 in) wheel travel
R: Showa shock with adjustable preload, 120 mm (4.7 in) wheel travel
Brakes F: Dual-piston, 316 mm (12.4 in) disc
R: Single-piston, 240 mm (9.4 in) disc
Tires F: 110/80–17
R: 150/70–17
Rake, trail 28.0º, 120 mm (4.7 in)
Wheelbase 1,430 mm (56.3 in)
Seat height30.6 in (780 mm)
Weight181.0 kg (399.1 lb) (claimed) [3]  (dry)
187 kg (412 lb) [4]  (wet)
Fuel capacity12 L (2.6 imp gal; 3.2 US gal)
Oil capacity2.8 L (3.0 US qt)

The Honda Hawk GT (NT650) motorcycle was designated as model RC31 and was designed by Toshiaki Kishi, and was the second Honda bike with "Pro-Arm" suspension after the RC30 VFR750R.

Contents

650 cc Honda Hawk GT 1988HondaHawkGT.jpg
650 cc Honda Hawk GT

The Hawk GT is one of the first modern naked bikes along with the Yamaha SRX, which were both released several years before the Ducati Monster and eventually the Suzuki SV650. The Hawk GT is often described as a cult bike. [5]

North American model

The US model NT650, Hawk GT 647, RC31 was introduced in 1988 and produced through 1991. It has an aluminium box frame with the separate rear frame bolted on, and a chain-drive, single-sided swingarm.

Priced above other entry-level models and only slightly below many 600 cc sport bikes, the Hawk GT did not sell well in American markets. [6]

There are only very minor changes between the 1988 model year and the 1989-1991 model years. In 1989, the front suspension damper rods were changed to have only two (rather than four for the 1988) holes. The front brake calipers were also changed to have screw-on covers over the mounting pins. In 1991, the oil lines were run internally through the engine, rather than externally. The Canadian model was identical to the US model except for the colors. In the US, the 1988 model was offered in Tempest Gray and Tanzanite Blue. In subsequent years, Bright Red only was offered in the US.

The 1988 model had a wet weight of 187 kg (412 lb). [4] The 650 cc engine had a claimed output of 43 kW (58 hp) @ 5000 rpm. [4]

European model

A cousin to the Hawk GT, the NTV 600 "Revere" was available in Europe from 1988 to 1992. [2] It had an integrated steel frame, larger fuel tank (19 litres or 4.2 imperial gallons), a lower and stubbier silencer, shaft drive, single-sided alloy swinging arm at rear with adjustable monoshock and a centre stand. It was launched as a "gentleman's" motorcycle but was seen[ by whom? ] as expensive for what was on offer.

The 600 Revere was replaced in 1993 by the bored-out NTV650 (the Revere name being dropped in the UK), with a cheaper specification (including tubular handlebars instead of alloy bars, cheaper instruments and horns, some supplied without a centre stand), and continued with the "stubby" silencer until 1995 and later models got a full length silencer to comply with updated noise regulations. The price was reduced compared to the Revere, and this later model sold better.

The NTV650 was replaced in 1998 by the Spanish built NT650V Deauville, a much heavier fully-faired model with integral small panniers and a steel double-sided swinging arm.

Japan model

400 cc Honda Bros Honda Bros 400.JPG
400 cc Honda Bros

Named the Bros in Japan, because the two different engine displacement versions conceived together as "brothers", [7] [ self-published source? ] the Bros came in 400 and 650 cc (24 and 40 cu in) versions, with the Bros 400 being designated NC25. After Honda stopped exporting the Hawk in 1992, they continued the Bros in Japan for one more year. A close ratio gear box (which drops into the Hawk), different wheels, and lower clip-ons were the major changes. A Motor Cycle News review said the Bros 400 is "heavy, underpowered and outdated, ... but surprisingly nice to ride – they’re well balanced, steer well and the engine is flexible, torquey and characterful given its 33bhp output. The Bros version is chain driven instead of using a shaft drive, lightening the unspring weight of the bike considerably. The Bros has a comfy, semi-upright café racer riding position." [8]

Notes

  1. 1 2 3 4 "Forgotten Middleweight: 1988-1992 Honda NT650 Hawk GT". Motorcycle Classics. July–August 2014. Retrieved July 13, 2017.
  2. 1 2 HONDA NTV650 (1988-1997) Review, Motor Cycle News, November 24, 2006, retrieved July 13, 2017
  3. "Hawk GT 1988" (Press release). American Honda Motor Co. March 1988.
  4. 1 2 3 "Honda Hawk GT: Bird of a Different Feather". Cycle World . Vol. 27, no. 6. June 1988. pp. 34–39.
  5. Assoc, American Motorcyclist (June 2007), "Cult Bike!", American Motorcyclist, p. 22
  6. Wu, Frank H (12 November 2013). "My First Motorcycle: The Honda Hawk GT". Huffington Post, November 11, 2013.
  7. "The Amazing Honda Hawk GT NT650". Canyon Chasers. 16 February 2013.
  8. "HONDA BROS 400 (1988-1992) Review". Motorcycle News. November 4, 2009. Retrieved July 13, 2017.

Related Research Articles

<span class="mw-page-title-main">Honda VF and VFR</span> Range of motorcycles

The Honda VF and VFR series is a range of motorcycles first introduced in 1982 by Honda featuring V4 engines.

<span class="mw-page-title-main">Honda CB series</span> Line of Honda motorcycles

The CB Series is an extensive line of Honda motorcycles. Most CB models are road-going motorcycles for commuting and cruising. The smaller CB models are also popular for vintage motorcycle racing. The related Honda CBR series are sport bikes.

<span class="mw-page-title-main">Honda CB750 and CR750</span> Four cylinder engine motorcycle

The Honda CB750 is an air-cooled, transverse, in-line-four-cylinder-engine motorcycle made by Honda over several generations for year models 1969–2008 with an upright, or standard, riding posture. It is often called the original Universal Japanese Motorcycle (UJM) and also is regarded as the first motorcycle to be called a "superbike".

The Honda ST series, also known as the Pan-European in Europe, is a duo of Sport Touring motorcycles comprising the ST1100 and the later ST1300.

<span class="mw-page-title-main">Honda Shadow</span> Honda cruiser motorcycle

The Honda Shadow refers to a family of cruiser-type motorcycles made by Honda since 1983. The Shadow line features motorcycles with a liquid-cooled 45 or 52-degree V-twin engine ranging from 125 to 1,100 cc engine displacement. The 250 cc Honda Rebel is associated with the Shadow line in certain markets.

<span class="mw-page-title-main">Honda VFR400</span> Type of motorcycle

The Honda VFR400 series of motorcycles were a related series of 399 cc V4-engined motorcycles, which were essentially scaled-down versions of the larger VFR race models of the day. They were mainly developed for, and sold in, the Japanese domestic market, in part due to the tougher motorcycle drivers' license restrictions in Japan at the time for motorcycles with displacement exceeding 400cc.

<span class="mw-page-title-main">Honda CX series</span> Series of motorcycles

The Honda CX series motorcycles, including the GL500 and GL650 Silver Wing variants, were developed and released by Honda in the late 1970s, with production ending in most markets by the mid 1980s. The design included innovative features and technologies that were uncommon or unused at the time such as liquid cooling, electric-only starting, low-maintenance shaft drive, modular wheels, and dual CV-type carburetors that were tuned for reduced emissions. The electronic ignition system was separate from the rest of the electrical system, but the motorcycle could only be started via the start button.

<span class="mw-page-title-main">Sport bike</span> Motorcycles designed for performance

A sport bike, sports motorcycle, or sports bike is a motorcycle designed and optimized for speed, acceleration, braking, and cornering on asphalt concrete race tracks and roads. They are mainly designed for performance at the expense of comfort, fuel economy, safety, noise reduction and storage in comparison with other motorcycles.

<span class="mw-page-title-main">Honda CBX</span> Sports motorcycle manufactured from 1978 to 1982

The Honda CBX sports motorcycle was manufactured by Honda from 1978 to 1982. With a 1047cc inline six-cylinder engine producing 105 bhp (78 kW), it was the flagship of the Honda range. The CBX was well-received by the press, but was outsold by its sibling introduced in late 1979, the Honda CB900F.

<span class="mw-page-title-main">Matchless</span> British motorcycle and automobile manufacturer

Matchless is one of the oldest marques of British motorcycles, manufactured in Plumstead, London, between 1899 and 1966. A wide range of models were produced under the Matchless name, ranging from small two-strokes to 750 cc four-stroke twins. Matchless had a long history of racing success; a Matchless ridden by Charlie Collier won the first single-cylinder race in the first Isle of Man TT in 1907.

<span class="mw-page-title-main">Motorcycle engine</span> Engine that powers a motorcycle

A motorcycle engine is an engine that powers a motorcycle. Motorcycle engines are typically two-stroke or four-stroke internal combustion engines, but other engine types, such as Wankels and electric motors, have been used.

<span class="mw-page-title-main">BSA Rocket 3/Triumph Trident</span> 1960s/1970s British motorcycle made by Triumph Engineering, Meriden

The Triumph Trident and BSA Rocket 3 was a technically advanced, high-performance roadster motorcycle made by Triumph Engineering and BSA from 1968 to 1975, and sold under both the Triumph and BSA marques. Alongside the Honda CB750, and later the two-stroke Kawasaki triples, it brought a new level of sophistication to street motorcycles, marking the beginning of the superbike era. The Honda CB750 overshadowed the Trident to be remembered as the 'first superbike', in spite of the Triumph Trident actually debuting before the Honda by a few weeks.

<span class="mw-page-title-main">Ducati Supersport</span> Italian air-cooled 4 stroke desmodromic 2-valve 90° L-twin motorcycle

The Ducati Supersport and SS are a series of air-cooled four stroke desmodromic 2-valve 90° L-twin motorcycles made by Ducati since 1988. A limited edition Supersport called the SuperLight was sold in 1992. The name harked back to the round case 1973 Ducati 750 Super Sport, and the 1975 square case 750 and 900 Super Sport. The appellation 'SS' was applied only to the later belt drive (Pantah) based models.

The history of the motorcycle begins in the second half of the 19th century. Motorcycles are descended from the "safety bicycle," a bicycle with front and rear wheels of the same size and a pedal crank mechanism to drive the rear wheel. Despite some early landmarks in its development, the motorcycle lacks a rigid pedigree that can be traced back to a single idea or machine. Instead, the idea seems to have occurred to numerous engineers and inventors around Europe at around the same time.

<span class="mw-page-title-main">Honda CBR400</span> Type of motorcycle

The Honda CBR400 is a Japanese domestic market small-capacity sport motorcycle, part of the CBR series introduced by Honda in 1983. It was the first Honda motorcycle to wear a CBR badge.

The Honda CB900F is a Honda motorcycle made in two iterations which appeared some twenty years apart. Both generations of the CB900F are straight four-cylinder four-stroke 900 cc (55 cu in) roadsters.

<span class="mw-page-title-main">BMW K1600</span> Type of motorcycle

The BMW K1600GT, K1600GTL, and K1600B are motorcycles manufactured by BMW Motorrad. The former two were announced in July 2010, unveiled at the Intermot motorcycle show in Cologne in October 2010; they went on sale in March 2011. The latter was announced in October 2016. The K1600GTL is a full dress luxury tourer, which replaced the K1200LT. It was intended to compete with the Honda Gold Wing. The K1600GT was more of a sport tourer similar to the then-existing K1300GT and previous K1200GT models. The K1600B is a bagger designed primarily for the North American market.

<span class="mw-page-title-main">Motorcycle braking systems</span>

Motorcycle braking systems have varied throughout time, as motorcycles evolved from bicycles with an engine attached, to the 220 mph (350 km/h) prototype motorcycles seen racing in MotoGP. Most systems work by converting kinetic energy into thermal energy (heat) by friction. On motorcycles, approximately 70% of the braking effort is performed by the front brake. This however can vary for individual motorcycles; longer-wheelbase types having more weight biased rearward, such as cruisers and tourers, can have a`greater effort applied by the rear brake. In contrast, sports bikes with a shorter wheelbase and more vertical fork geometry can tolerate higher front braking loads. For these reasons, motorcycles tend to have a vastly more powerful front brake compared to the rear.

The Ducati Monza is a 249 cc (15.2 cu in) single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1961 to 1968. It was the touring version of Ducati's first 250 cc road bike. Reviews of the Monza praised its speed, road holding, engine smoothness and brakes.

References