Honda Juno

Last updated

The Honda Juno is a scooter. Two versions were produced, the K-series of 1954 (K, KA, KB), and the M-series of 1962 (M80, M85).

Contents

Juno K

Honda Juno K
HONDA JUNO K 1954 in Honda Collection Hall.JPG
Manufacturer Honda Motor Company
Production1954–1955
Engine 189 cc (11.5 cu in) [K], 220 cc (13 cu in) [KA & KB], four-stroke, OHV, single-cylinder
Top speed70 km/h[ citation needed ]
Power 7.5 hp @ 4,800rpm [K], 9.0 hp @ 5,500rpm [KA & KB][ citation needed ]
Transmission 3-speed manual
DimensionsL: 2,070 mm (81 in)
W: 800 mm (31 in)
H: 1,025 mm (40.4 in) [K & KA], 1,000 m (39,000 in) [KB]
Weight170 kg [K], 195 kg [KA], 160 kg [KB][ citation needed ] (dry)

The Juno K was a deliberately elaborate bike in 1954. It was Honda's first scooter and would be competing with the well established Fuji Rabbit and Mitsubishi Silver Pigeon. It featured the first electric start, a full windscreen with a tilt-back sun-shade, and built-in signal lamps. It also introduced Fibre-Reinforced Plastic body construction to Japan. [1]

Only 5,980 were produced in a year and a half. Kihachiro Kawashima, who retired as executive vice-president in 1979, remembered the bike as a "splendid failure": it was too expensive, the engine overheated, the FRP body was heavier than expected and made the bike underpowered and clumsy, the new cantilevered suspension was problematic, and customers did not like the motorcycle-style clutch operation. [2] [3]

The final Juno KB model can be distinguished by enlarged rear vents and new vents added to the windscreen.

Technology developed for the Juno K would be applied to later bikes. The electric start was re-introduced with the C71 Dream in 1957, and the new Plastics department under Shozo Tsuchida developed polyethylene components that would distinguish the Super Cub. [4] [5]

Juno M80/M85

Honda Juno M85
HONDA JUNO M85 1962 in Honda Collection Hall.jpg
Manufacturer Honda Motor Company
Production1962
Engine Opposed twin-cylinder, OHV, 4-stroke, 169 cc (10.3 cu in) [M80 124 cc (7.6 cu in)]
Top speed100 km/h[ citation needed ]
Power 12 hp @ 7,600 rpm [M80 11 hp @ 9,000 rpm][ citation needed ]
Transmission HRD hydraulic-mechanical
DimensionsL: 1,820 mm (72 in) [M80 1,810 mm (71 in)]
W: 675 mm (26.6 in) [M80 665 mm (26.2 in)]
H: 1,030 mm (41 in)
Weight157 kg (346 lb) [M80 146 kg (322 lb)][ citation needed ] (dry)

The Juno M80/M85 was a different approach, introduced in November 1961. Unlike the K-series, there is no upper windscreen, the engine is an exposed horizontal-twin rather than an enclosed fan-cooled unit, and the body construction is conventional monocoque steel rather than FRP panels over tube. The M80/M85 also introduced a clutchless Badalini-type hydraulic-mechanical transmission which would provide the basis for the later Hondamatic motorcycle transmissions. [6]

The M80 and M85 are essentially the same vehicle, with the M85 designation indicating a mid-year engine enlargement. The Juno was discontinued by year-end with only 5,880 produced. [7]

Related Research Articles

The Honda XR series is a range of four-stroke off-road motorcycles that were designed in Japan but assembled all over the world.

Honda NH series motorcycle

The NH series of Honda scooters was sold worldwide beginning in 1983, in 50, 80, 90, 100 and 125cc versions. All models have an air-cooled two-stroke engine with CDI ignition. All models except the Lead 50 have leading link front suspension, electric and kick start, and a fuel gauge. The Lead 50 has a traditional telescopic fork front suspension and only electric start. All models have drum brakes and CVT transmission.

Honda Super Cub Underbone

The Honda Super Cub or Honda Cub is a Honda underbone motorcycle with a four stroke single cylinder engine ranging in displacement from 49 to 124 cc.

The Honda CR series is a range of off-road motorcycles made by the Honda corporation from 1973 onwards.

Honda Z series motorcycle

The Honda Z series was a line of minibikes manufactured by Honda Motorcycles. Though Honda's official model designations are typically Z50A, Z50J, Z50M, Z50R, and ZB50, they are more commonly referred to as the "Monkey" or "Gorilla" because of the way people are said to look when riding one of such bikes. Sales of the bike began in March 1964 with the Z50M model, and production ended in 2017.

Motorcycle engine engine that powers a motorcycle

A motorcycle engine is an engine that powers a motorcycle. Motorcycle engines are typically two-stroke or four-stroke internal combustion engines, but other engine types, such as Wankels and electric motors, have been used.

Honda P50 Honda Moped

The Honda P50 was introduced in June 1966. It was the last motor-wheel moped design by Honda.

Honda CT110

The Honda CT110 is a small dual-sport motorcycle made by Honda in Japan since 1980 and is sold in various parts of the world. The bike has sold well worldwide.

Honda CRF series

The Honda CRF series is a line of four-stroke motocross, trail, and dual sport motorcycles manufactured and marketed by Honda.

Honda Express Honda moped

The Honda Express or Honda NC50 is a scooter made by Honda between 1977 and 1983. Variants include the Express, Express II, Express SR and Urban Express. All versions of the Express line are powered by an air-cooled 49 cc (3.0 cu in) two-stroke engine.

Honda ST series (minibike) motorcycle

The Honda ST-series minibikes are known as the Dax in Japan and Europe, and the Trail 70 in Canada and the US.

The Honda CT series was a group of Honda trail bike motorcycles made since 1964. The CT designation is a slight exception in Honda nomenclature in that "CT" does not indicate a series of mechanically related bikes, but rather a group of different bikes that are all for casual off-road use.

Underbone

An underbone is a motorcycle that uses structural tube framing with an overlay of plastic or non-structural body panels and contrasts with monocoque or unibody designs where pressed steel serves both as the vehicle's structure and bodywork. Outside Asia, the term underbone is commonly misunderstood to refer to any lightweight motorcycle that uses the construction type, known colloquially as step-throughs, mopeds or scooters.

Electric motorcycles and scooters plug-in electric vehicles with two or three wheels

Electric motorcycles and scooters are plug-in electric vehicles with two or three wheels. The electricity is stored on board in a rechargeable battery, which drives one or more electric motors. Electric scooters have a step-through frame.

Honda CT50 Motra

The Honda Motra is a minibike produced in 1982–3 for the Japanese domestic market.

Yamaha TMAX scooter

The Yamaha TMAX series of maxi-scooters has been manufactured by Yamaha Motor Company for the European market since its debut at July 2000 press events in Naples, Italy and Iwata, Japan, combining motorcycle performance with the convenience and flexibility for commuting of a scooter.

Scooter (motorcycle) type of motorcycle

A scooter or motor scooter is a type of motorcycle with a step-through frame and a platform for the rider's feet. Elements of scooter design were present in some of the earliest motorcycles, and scooters have been made since at least 1914. Scooter development continued in Europe and the United States between the World Wars.

Honda NC700D Integra

The Honda NC700D/NC750D Integra is a motorcycle/scooter hybrid made by Honda since 2012. Known internally as the RC62, the Integra was originally unveiled as the New Mid Concept in 2010, before being presented in production form at EICMA 2011 in Milan. The Integra shares a platform with two motorcycle variants, the NC700S (RC61) and the NC700X (RC63). All three variants are powered by a 670 cc engine derived from the unit used in the Honda Fit automobile. The Integra will be available with two different power outputs, one version develops a peak power output of 38.1 kW (51.1 hp) at 6,250 rpm and 62 N⋅m (46 lb⋅ft) of torque at 4,750 rpm, while the other has a lower output of 35 kW (47 hp) and 60 N⋅m (44 lb⋅ft) to meet 2013 A2 European licensing regulations.

Honda NC700 series motorcycle

The Honda NC700 series is a family of motorcycles produced by Honda since 2012. NC700 series was a 'new concept', being unlike conventional motorcycles, a bike designed for commuters, new or veteran riders. The series also includes the motorcycle/scooter hybrid NC700D Integra. The NC700 series is classed as a commuter model bike which has incorporated design and mechanical elements from various motorcycle types. The riding position is similar to standard bike styles. There is a helmet-sized internal storage in place of the traditional fuel tank, which in turn is located under the seat. The series is often marketed as fun to ride, easy to handle and very fuel efficient.

References

Footnotes
  1. "Innovations". Honda. Retrieved 2008-02-22.
  2. "Production". Honda. Retrieved 2008-02-22.
  3. "Failure". Honda. Retrieved 2008-02-22.
  4. "Electric Start". Honda. Retrieved 2008-02-22.
  5. "Plastics". Honda. Retrieved 2008-02-22.
  6. "Transmission". Honda. Retrieved 2008-02-22.
  7. "Production". Honda. Retrieved 2008-02-22.
Sources

See also