Honda F20C engine

Last updated
Honda F20C engine
HondaS2000-003.jpg
F22C1 engine
Overview
Manufacturer Honda
Production2000–2009
Layout
Configuration Naturally-aspirated Inline-4
Displacement 2.0 L; 121.9 cu in (1,997 cc) (F20C)
2.2 L; 131.6 cu in (2,157 cc) (F22C1)
Cylinder bore 87 mm (3.43 in)
Piston stroke 84 mm (3.31 in) (F20C)
90.7 mm (3.57 in) (F22C1)
Cylinder block materialAluminum
Cylinder head materialAluminum
Valvetrain DOHC 4 valves x cyl. with VTEC
Compression ratio F20C: 11.7:1 (Japan), 11.0:1 (North America, Europe)
F22C1: 11.1:1 (North America, Japan)
RPM range
Max. engine speed 8,800 (F20C), 8,000 (F22C1)
Combustion
Fuel system Fuel injection
Fuel typeGasoline
Cooling system Water-cooled with water-cooled oil filter base plate
Output
Power output 237–247 bhp (177–184 kW; 240–250 PS)
Torque output 150–162 lb⋅ft (203–220 N⋅m)
Dimensions
Dry weight F20C: Piston 355g; Wrist Pin 109g; Connecting Rod 636g F22C1: Piston 346g; Wrist Pin 109g; Connecting Rod 649g
Chronology
Predecessor Honda F engine

The F20C and F22C1 were inline-4 engines produced by Honda for use in the Honda S2000. They are one of the few Honda 4-cylinder automobile engines that are designed to sit longitudinally for rear wheel drive.

Contents

These engines are a distant relative to the F-series engines found in the mid-1990s Honda Accord and Prelude. [1] To get most out of the compact-sized engine, Honda engineers utilized technology derived from Honda's racing engines. [2] The F20C and F22C1 have two overhead cams with roller followers, a ladder-frame main bearing stiffener, a VTEC system for both the intake and exhaust camshaft, Fiber-Reinforced Metal cylinder liners (FRM), Forged aluminum molybdenum disulfide-coated piston skirts for reduced friction, and uses a timing chain.

The VTEC system consists of two separate cam lobe profiles. Variable cam phasing is not used. Roller followers are used to reduce friction in the valvetrain. The rocker arms are constructed using metal injection molding.

The engine block is constructed of aluminum with a fiber-reinforced metal sleeve. A timing chain drives an intermediate gear, which drives the cams. The pistons are forged aluminum. The intake plenum was designed with minimal volume for fast engine response, and a 14 lb (6.4 kg) flywheel was fitted until 2004. A high-flow catalyst is supplied along with an exhaust air-injection system, which greatly decreases catalyst light-off time and cold emissions.

F20C

The F20C was designed with high engine speed capability in mind, for increased power output; the rev limit is 9,000 rpm, with VTEC engagement at 6,000 rpm. Its relatively long stroke of 84 mm results in a mean piston speed of 4,965 ft/m, or 25.2 m/s, which was higher than any other production car to date. [4] Power output is 234 bhp (174 kW; 237 PS) at 8,300 rpm in North America and Europe. The Japanese version, which has a higher compression ratio, is capable of 247 bhp (184 kW; 250 PS) at 8,600 rpm. Honda's F20C Engine won a spot on Wards' 10 Best Engines List twice, in 2000 and 2001.

The engine displaces 2.0 L; 121.9 cu in (1,997 cc), lending to the Honda S2000's name. This method of naming follows suit with the rest of the Honda S roadsters (i.e. Honda S500, S600, and S800).

Applications:

The F20C produces the highest specific power output for any naturally aspirated piston engine in a car priced under US$100,000, at 125 hp (126.7 PS; 93.2 kW) per liter, ahead of the SR16VE N1 found in the homologation version of the JDM Nissan Pulsar producing 197 bhp (147 kW; 200 PS) for a specific power of 123.45 bhp (92.1 kW; 125.2 PS) per liter. Honda's F20C engine held the record for producing the highest specific power output for any mass production naturally aspirated piston engine in a car, at 123.5 HP/L, until Ferrari began production of the 458 Italia in 2010, which produced 124.5 HP/L. [2]

Although designed at the end of the previous century, the F20C is still one of the highest output per liter and the highest revving mass production engines ever made. In recognition of its incredible power output, the Honda S2000's engine has won the International Engine of the Year category for 1.8 to 2.2-liter engines five times in its lifetime (from 2000 to 2004). [2]

F22C1

In 2004, Honda produced a stroked 90.7 mm (3.57 in) version of the F20C, increasing displacement by 160 cc (9.8 cu in) to 2.2 L; 131.6 cu in (2,157 cc). Dubbed the F22C1, it was originally designed for the North American market being introduced for the 2004 model year. Maximum power output was maintained at 240 hp (179 kW; 243 PS) at 7,800 rpm. Rated torque increased from 155 lb⋅ft (210 N⋅m) at 7,500 rpm for the F20C to 162 lb⋅ft (220 N⋅m) at 6,500 rpm for the F22C. The redline was reduced from 8,900 rpm to 8,200 rpm, mandated by the longer travel distance of the pistons. Peak horsepower output was originally rated identical to the F20C, with "overall powerband characteristics strengthened 4% to 10% between 1,000 -8,000 rpm". [5]

The F22C1 was used exclusively in the North American market for 2004 and 2005 with the F20C being used in all other markets. In 2006, the engine fully replaced F20C engines in the Japanese market as well which resulted in a drop in rated power output from 250 PS (184 kW; 247 bhp) to 242 PS (178 kW; 239 bhp). Outside Japan and the United States, the F20C continued to be the only available engine.

Applications:

See also

Related Research Articles

<span class="mw-page-title-main">Honda Integra</span> Motor vehicle

The Honda Integra, sold in North America as the Acura Integra and later the Acura RSX, is an automobile produced by the Japanese company Honda from 1985 until 2006, and then since 2021. It succeeded the Quint as a more luxurious and sport-oriented derivative of the Civic. The Integra was one of the launch models for Acura in the US in 1986 alongside the Acura Legend. Throughout its production run, the Integra was highly regarded for its handling and performance. The 1995–2001 Integra Type R is widely regarded as one of the best front-wheel-drive cars of all time.

Honda Type R models are special performance editions of their respective model families.

<span class="mw-page-title-main">Honda B engine</span> Former Japanese automobile engines

The B-series are a family of inline four-cylinder DOHC automotive engines introduced by Honda in 1988. Sold concurrently with the D-series which were primarily SOHC engines designed for more economical applications, the B-series were a performance option featuring dual overhead cams along with the first application of Honda's VTEC system, high-pressure die cast aluminum block, cast-in quadruple-Siamese iron liners.

<span class="mw-page-title-main">Nissan VQ engine</span> Reciprocating internal combustion engine

The VQ is a family of V6 automobile petrol engines developed by Nissan and produced in displacements varying from 2.0 L to 4.0 L. Designed to replace the VG series, the all-aluminium 4-valve per cylinder DOHC design debuted with Nissan's EGI/ECCS sequential multi-point fuel injection (MPFI) system. Changes from the VG engine include switching to a timing chain from a timing belt, and relocating the water pump from the outside of the engine to inside the timing cover where the pump is driven by the timing chain. Later versions featured various improvements, such as variable valve timing, and NEO-Di designated VQ engines replace MPFI with direct fuel injection.

<span class="mw-page-title-main">Nissan SR engine</span> Reciprocating internal combustion engine

The SR engine is a series of 1.6 L (1,596 cc), 1.8 L (1,838 cc) or 2.0 L (1,998 cc) straight-four, four-stroke gasoline engines manufactured by Nissan. It has an aluminium head and block with steel sleeves and has a DOHC 4-valve design, with variable valve timing on select models. It was added to a new engine family name PLASMA.

<span class="mw-page-title-main">Honda C engine</span> Reciprocating internal combustion engine

Honda's first production V6 was the C series; it was produced in displacements from 2.0 to 3.5 liters. The C engine was produced in various forms for over 20 years (1985–2005), having first been used in the KA series Legend model, and its British sister car the Rover 800-series.

The Honda B20A engine series, known as the B20A and B21A, was an inline four-cylinder engine family from Honda introduced in 1985 in the second-generation Honda Prelude. Also available in the contemporary third-generation Honda Accord in the Japanese domestic market, along with the Accord-derived Vigor, the B20A was Honda's second line of multivalve DOHC inline four-cylinder engines behind the "ZC" twin-cam variant of the ordinarily SOHC D-series, focused towards performance and displacing 2.0 to 2.1 litres.

<span class="mw-page-title-main">Honda E engine</span> Former Japanese automobile engines

The E-series was a line of inline four-cylinder automobile engines designed and built by Honda for use in their cars in the 1970s and 1980s. These engines were notable for the use of CVCC technology, introduced in the ED1 engine in the 1975 Civic, which met 1970s emissions standards without using a catalytic converter.

<span class="mw-page-title-main">Honda J engine</span> Reciprocating internal combustion engine

The J-series is Honda's fourth production V6 engine family introduced in 1996, after the C-series, which consisted of three dissimilar versions. The J-series engine was designed in the United States by Honda engineers. It is built at Honda's Anna, Ohio, and Lincoln, Alabama, engine plants.

<span class="mw-page-title-main">Toyota ZZ engine</span> Reciprocating internal combustion engine

The Toyota ZZ engine family is a straight-4 piston engine series. The ZZ series uses a die-cast aluminium engine block with thin press-fit cast iron cylinder liners, and aluminium DOHC 4-valve cylinder heads. The camshafts are chain-driven. The two 1.8 L members of the family, the 1ZZ and 2ZZ, use different bore and stroke. The former was optimised for economy, with torque emphasised in lower revolutions per minute operating range, while the latter is a "square" design optimised for high-RPM torque, yielding higher peak power. The ZZ family replaced the extremely popular cast-iron block 4A engines.

<span class="mw-page-title-main">Honda A engine</span> Reciprocating internal combustion engine

The Honda A series inline-four cylinder engine is used in 1980s Honda Accord and Prelude models. It was introduced in 1982, with the second-generation Honda Prelude, and available in three displacement sizes: 1.6-, 1.8- and 2.0-liters. It features cast iron block and aluminum SOHC head design with three valves per cylinder for a total of 12 valves. It was available in carbureted and fuel-injected configurations

<span class="mw-page-title-main">Honda D engine</span> Japanese automobile engines

The Honda D series inline-four cylinder engine is used in a variety of compact models, most commonly the Honda Civic, CRX, Logo, Stream, and first-generation Integra. Engine displacement ranges between 1.2 and 1.7 liters. The D Series engine is either SOHC or DOHC, and might include VTEC variable valve lift. Power ranges from 66 PS (49 kW) in the Logo to 130 PS (96 kW) in the Civic Si. D-series production commenced in 1984 and ended in 2005. D-series engine technology culminated with production of the D15B 3-stage VTEC (D15Z7) which was available in markets outside of the United States. Earlier versions of this engine also used a single port fuel injection system Honda called PGM-CARB, signifying the carburetor was computer controlled.

<span class="mw-page-title-main">Honda F engine</span> Reciprocating internal combustion engine

The Honda F-Series engine was considered Honda's "big block" SOHC inline four, though lower production DOHC versions of the F-series were built. It features a solid iron or aluminum open deck cast iron sleeved block and aluminum/magnesium cylinder head.

<span class="mw-page-title-main">Honda H engine</span> Reciprocating internal combustion engine

The Honda H engine was Honda's larger high-performance engine family from the 1990s and early 2000s. It is largely derived from the Honda F engine with which it shares many design features. Like Honda's other 4-cylinder families of the 1980s and 1990s, It has also enjoyed some success as a racing engine, forming the basis of Honda's touring car racing engines for many years, and being installed in lightweight chassis for use in drag racing. The F20B is a part of the F-series family of engines; it is basically a cast-iron sleeved down destroked version of the H22A. It was developed by Honda to be able to enter into the 2-liter class of international racing.

<span class="mw-page-title-main">Honda R engine</span> Reciprocating internal combustion engine

The Honda R engine is an inline-four engine launched in 2006 for the Honda Civic (non-Si). It is fuel injected, has an aluminum-alloy cylinder block and cylinder head, is a SOHC 16-valve design and utilizes Honda's i-VTEC system. The R series engine has a compression ratio of 10.5:1, features a "drive by wire" throttle system which is computer controlled to reduce pumping losses and create a smooth torque curve.

<span class="mw-page-title-main">Honda Civic Si</span> Motor vehicle

The Honda Civic Si is a sport compact trim of Honda's Civic. The Si trim was introduced for the third generation of Honda Civics in both Japan and North America. In Canada and elsewhere, the trim became known as the SiR for the sixth and seventh generations as the "Si" badge was used for the equivalent to the USDM Civic EX model.

<span class="mw-page-title-main">Subaru EJ engine</span> Reciprocating internal combustion engine

The Subaru EJ engine is a series of four-stroke automotive engines manufactured by Subaru. They were introduced in 1989, intended to succeed the previous Subaru EA engine. The EJ series was the mainstay of Subaru's engine line, with all engines of this series being 16-valve horizontal flat-fours, with configurations available for single, or double-overhead camshaft arrangements. Naturally aspirated and turbocharged versions are available, ranging from 96 to 310 hp. These engines are commonly used in light aircraft, kit cars and engine swaps into air-cooled Volkswagens, and are also popular as a swap into copy wasserboxer engined Volkswagen T3/Vanagon. Primary engineering on the EJ series was done by Masayuki Kodama, Takemasa Yamada and Shuji Sawafuji of Fuji Heavy Industries, Subaru's parent company.

<span class="mw-page-title-main">Honda G engine</span> Reciprocating internal combustion engine

The Honda G-series engine is a family of slanted inline-five cylinder gasoline engines. The engine family features a single overhead cam layout with 4 valves per cylinder. The engine's displacement varied from 2.0 L; 121.8 cu in (1,996 cc) to 2.5 L; 149.6 cu in (2,451 cc). The G-Series was originally used in the 1989 Honda Vigor, Honda Rafaga, Honda Ascot and Honda Inspire before being carried over to the Vigor's successor; the Acura TL, which used the G-Series family of engines from 1995 to 1998 in North America, and continued use in the JDM Honda Saber until 1998 as well.

<span class="mw-page-title-main">Honda Civic (fifth generation)</span> Motor vehicle model, 1991–1995

The fifth-generation Honda Civic is an automobile produced by Honda from 1991 until 1995. It debuted in Japan on September 9, 1991. At its introduction, it won the Car of the Year Japan award for the second time. Fifth-generation Civics were larger than their predecessors, had more aerodynamic bodies, and the wheelbase was increased to 257 cm (101.3 inches)—for the three-door hatchback—and to 262 cm (103.2 inches)—for the four-door sedan. The Civic Shuttle station wagon was not part of the fifth generation and was dropped for overseas markets, while the previous-generation wagon continued in Japan and Europe.

References

  1. "Technology to Increase Power Output of a Low-Emission/High-Efficiency Engine". Spark-Ignition Engine Technology. July 1999. The model F20C is the upscale version of the F20B which has been the powerplant of the Honda Accord.
  2. 1 2 3 4 "JDM Spec Engines - Honda F20C Engine". jdmspecengines.com. 2011. Archived from the original on 2018-02-19.
  3. 1 2 "2004 Honda S2000 -- Powertrain Part 2". Honda. Retrieved 1 April 2014.
  4. "Engines with the fastest piston speeds". hondaswap.com.
  5. 1 2 "Honda S2000 Receives Enhanced Power and Improved Handling for 2004" . Retrieved 1 April 2014.
  6. "2006 Honda S2000 Summary". Honda.