Honda Gold Wing

"Gold Wing" redirects here. Not to be confused with Goldwing.

Honda Gold Wing

2018 Honda Gold Wing GL1800
Manufacturer	Honda Motor Co., Ltd
Production	1974–present
Assembly	Japan
Class	Touring
Engine	1,833 cc (111.9 cu in) water-cooled flat-six, SOHC, 4 valves per cylinder; with PGM-FI
Bore / stroke	73 mm × 73 mm (2.9 in × 2.9 in)
Compression ratio	10.5:1
Power	93 kW (125 hp) @ 5,500 rpm (claimed) [1] 73 kW (98 hp) @ 5,500 rpm (rear wheel) [2]
Torque	170 N⋅m (130 lbf⋅ft) @ 4,500 rpm (claimed) [1] 148 N⋅m (109 lb⋅ft) @ 1,210 rpm (rear wheel) [2]
Ignition type	Digital electronic
Transmission	6-speed manual with slipper clutch, Tour with electric reverse, or 7-speed dual-clutch automatic with reverse and forward
Frame type	Aluminum die-cast, twin tube
Suspension	F: Single shock double wishbone 109.2 mm (4.30 in) travel R: Single-sided swing arm with Pro-Link Showa shock, 104.1 mm (4.10 in) travel
Brakes	F: Dual 320 mm (13 in) discs, dual radial-mounted 6-piston Nissin calipers R: Single 316 mm (12.4 in) disc, 3-piston Nissin caliper
Tires	F: 130/70R-18, R: 200/55-16
Rake, trail	30.5 degrees/109 mm (4.3 in)
Wheelbase	1,690 mm (66.7 in)
Dimensions	L: 2,575 mm (101.4 in) W: 905 mm (35.6 in) H: 1,430 mm (56 in)
Seat height	740 mm (29.3 in)
Weight	357 kg (787 lb) [3] Gold Wing (wet) 379.0 kg (835.5 lb) [1] Gold Wing Tour (wet)
Fuel capacity	20.8 L (4.6 imp gal; 5.5 US gal) [3]

The Honda Gold Wing is a series of touring motorcycles manufactured by Honda. Gold Wings feature shaft drive and a flat engine. Characterized by press in September 1974 as "The world's biggest motor cycle manufacturer's first attack on the over-750cc capacity market...", ^[4] it was introduced at the Cologne Motorcycle Show in October 1974. ^[5]

The Gold Wing series

Total sales are more than 640,000, most of them in the U.S. market. ^{[6] [7]} Gold Wings were assembled in Marysville, Ohio, from 1980 until 2010, when motorcycle production there was halted. ^{[8] [9]} No Gold Wings were produced for the 2011 model year, and production resumed in Kumamoto Prefecture, Japan in 2011 using tooling transported from the American factory. ^[10]

The Society of Automotive Engineers of Japan  [ ja ] includes a Honda Gold Wing GL1000 manufactured in 1974 as one of their 240 Landmarks of Japanese Automotive Technology. ^[11] Through 2012, Honda GL models have appeared eighteen times in the Cycle World list of Ten Best bikes. ^[12]

Over the course of its production history, the Gold Wing had many design changes, beginning in 1975 with a 999 cc (61.0 cu in) flat-four engine; by 2001, this had grown to a 1,832 cc (111.8 cu in) flat-six. The 2012 model had anti-lock braking, cruise control, electrically assisted reverse gear, an optional airbag, a fairing with heating and an adjustable windscreen, panniers and a trunk, a pillion backrest, satnav, and a six-speaker radio/audio system with MP3/iPod connectivity. ^{[13] [14]}

Gold Wing development

In 1972, following the success of the CB750 superbike, the company assembled an R&D design team to explore concepts for a new flagship motorcycle. ^[15] The project leader was Shoichiro Irimajiri, who in the 1960s had designed Honda's multi-cylinder Grand Prix engines and their Formula One V12 engine. ^{[16] [17] [18]}

The 1974 Gold Wing with its flat-four shaft-drive powertrain used technologies both from earlier motorcycle ^{[19] [20]} and automotive designs. ^[21]

Although preceded by the 1971 water-cooled Suzuki GT750 two-stroke triple, ^{[22] [23]} the Gold Wing was the first Japanese production motorcycle with a water-cooled four-stroke engine. ^[24] The first four-cylinder boxer engine was produced in 1900. ^[25]

Target market

During its development, the CB750 was known within Honda as their "King of Motorcycles." ^[26] As it would sit atop the CB750 as the top of the line Honda motorcycle, the project that would become the Gold Wing was informally called the "King of Kings." ^{[5] [27]} Honda first envisaged the Gold Wing as a large sport motorcycle, but on learning that customers were "piling miles on touring", Honda reconsidered the bike's design objectives, ^{[28] [29]} realising that the primary market for the Gold Wing was the long-distance motorcyclist. ^[30] In North America a motorcycle suitable to that task would need comfort for the long haul, wind protection, a smooth ride, a comfortable seat, luggage storage, and power in abundance. ^{[31] [32]}

In America in the early 1970s, long-distance motorcyclists had only a few manufacturers to choose from: Harley-Davidson, Moto Guzzi and BMW. The H-D Electra Glide was a touring motorcycle with a loyal cult following. ^{[33] [34]} It faced strong competition from Moto Guzzi's 850cc Eldorado. ^[35] BMW motorcycles were smoother and more reliable, if expensive. ^[15] Other large Japanese motorcycles, such as the Honda CB750 and the Kawasaki Z1 were cheaper but were not ideal tourers with their small fuel tanks and rear drive-chains needing regular maintenance. ^[5] The Gold Wing was aimed at a newly emerging market segment, namely, a new kind of American long-distance rider who was not likely to buy a Harley-Davidson or BMW but who would open their wallets for a reliable machine offering comfort, endurance, low maintenance, and a smooth, torquey, quiet engine. ^{[17] [33] [18] [36]}

The Gold Wing's secondary target market was Europe, where riders prioritised handling and performance over luxury. ^{[33] [37]} (The European market's special demands subsequently led to the Honda Pan European). ^[38] Though other motorcycle manufacturers build touring bikes, no other touring bike has achieved the popularity of the Gold Wing.

M1 prototype & Project 371

In 1972, the project team broke from Honda practice ^[18] to produce an experimental prototype motorcycle code-named "M1". Instead of the usual transverse engine layout with a chain final drive, the M1 had a longitudinal engine suitable for shaft drive. The M1 had a 1470cc liquid-cooled ^[17] flat-six engine, (twice the displacement of the CB750). Instead of seeking high performance (as some engineers had wanted), the M1 engine was designed to have a broad torque output and to produce 80 horsepower (60 kW) at 6700 rpm, with a top speed of 220 kilometres per hour (140 mph). ^{[33] [29]}

The brainstorming team's M1 project was never intended as a production prototype. Nonetheless, the M1 should be seen as the primordial Gold Wing because so many of its distinctive features appeared on the GL1000. ^{[16] [17] [39]} The flat-six gave the M1 a low center of gravity, enhancing stability, but the extreme length of the engine/gearbox unit resulted in a cramped riding position. ^[40] Instead, the project team chose to build a bike with a compact one liter flat-four engine. ^{[33] [29]} This bike was code-named "Project 371", and Toshio Nozue (who had worked on CB750 development) ^[41] took over from Irimajiri as project leader. ^{[42] [43] [44]}

1st Generation

GL1000

Gold Wing GL1000

1975 Honda Gold Wing GL1000
Production	1974—1979
Assembly	Japan
Engine	999 cc (61.0 cu in) SOHC flat-four
Bore / stroke	72.0 mm × 61.4 mm (2.83 in × 2.42 in)
Compression ratio	9.2:1 [45]
Power	80 hp (60 kW) @7500 rpm [11]
Ignition type	Contact breaker [46]
Transmission	5-speed manual
Frame type	Steel full-duplex cradle
Suspension	F: Telescopic fork 143 mm (5.6 in) travel R: Swing arm, 86.3 mm (3.40 in) travel
Brakes	F: Dual discs, single-piston calipers R: Single disc, opposed 2-piston caliper
Tires	F: 3.50 H-19 (tube type) R: 4.50 H-17A (tube type)
Rake, trail	28 degrees/120 mm (4.7 in) [45]
Wheelbase	60.6 in (1,540 mm) [15]
Dimensions	L: 2,305 mm (90.7 in)
Seat height	31.9 in (810 mm) [46]
Weight	584 lb (265 kg) [11]  (dry)
Fuel capacity	19 L (4.2 imp gal; 5.0 US gal)

The Project 371 team finally settled on a layout that became the characteristic Gold Wing: a liquid-cooled flat-four SOHC engine, with a gear-driven generator that contra-rotated to counteract the engine's torque reaction. ^{[37] [47]} Cylinder blocks and crankcase were integral, with the transmission situated beneath the crankcase to keep the unit construction engine as short as possible. Final drive was by shaft. ^{[48] [49]}

Before going on sale in the US and in Europe in 1975, the Gold Wing was revealed to dealers in September 1974 at American Honda's annual dealer meeting in Las Vegas, and then shown to the public the following month at the IFMA ^[50] (International Bicycle and Motorcycle Exhibition; today Intermot) in Cologne. ^{[9] [51]}

Small fairings had been mounted on two of the show models at the US dealer show in Las Vegas. ^{[37] [48]} These Honda-designed fairings were to be manufactured in the US by the Vetter Fairing Company and sold as Hondaline accessories; but they never went into production after the molds were accidentally destroyed. ^[52] Consequently, the Gold Wing was born into the world naked, lacking saddlebags and having no place for luggage, without even a windshield. ^[9] This created a golden opportunity for accessory manufacturers, ^[21] who quickly offered a range of fairings and luggage accessories, particularly the Craig Vetter Windjammer series. ^[5]

The original 999 cubic centimetres (61.0 cu in) GL1000 (designated K0) had an electric starter backed up by a kick start lever stored inside a dummy fuel tank, which also housed the radiator expansion tank, electrical components, as well as the air filter supplying four Keihin 32 mm CV carburetors. The real fuel tank was under the seat, in order to keep the center of mass as low as possible. ^[53] The bike had a dry weight of 584 pounds (265 kg). ^{[49] [36] [46]} 13,000 Gold Wings were sold in the United States in 1975. ^[15]

There were no significant changes in the standard Gold Wing for 1976 (the K1 model). ^[48] To mark the United States Bicentennial year Honda announced the GL1000 LTD with distinctive insignia and color scheme (e.g., gold stripes, gold wheels) ^[16] plus some extra amenities. ^{[53] [54]} The LTD was a genuine limited edition with production restricted to about 2,000 units. ^{[48] [36]}

In the third model year (K2) Honda began refining the Gold Wing, although the changes for 1977 were small, such as exhaust pipe heat shields, revised seat and handlebar, as well as a new fuel gauge. ^[53] Weight increased to 595 pounds (270 kg). ^[36] The motorcycle division of Honda UK produced 52 Executive GL1000 K1 bikes by adding premium accessories to 1977 Gold Wings. ^[48]

The engine was modified in 1978 for the GL1000 K3 model, in order to make more torque available at lower engine speeds; the carburetors were reduced in size by 1 mm, the exhaust system was redesigned, valve timing and ignition timing were altered. ^[55] The kick-start mechanism was removed from the engine, and a reserve lighting module for the headlight and taillight (automatically switching to the second filament when one burns out) was removed from the electrics. ^[48] A small instrument panel appeared on top of a restyled dummy fuel tank. Wire-spoke wheels were replaced with Honda's new ComStar wheels, but the existing tires with inner tubes remained. ^{[53] [56]} Dry weight grew to 601 pounds (273 kg). ^[36]

1979 marked the end of GL1000 development with the K4 model (the UK version was designated KZ). Dry weight increased slightly to 604 pounds (274 kg). ^[48] for the last Gold Wing to be powered by a one-liter engine. ^{[57] [53]} There were only minor changes for this model year, except for the ComStar wheels; new ComStars had stronger steel spokes on aluminum rims instead of the original aluminum spoked wheels that precipitated a 1979 recall (for the 1978 model year). ^{[58] [59]} During the final run of the GL1000 in 1979, Hondaline saddlebags and trunk were available, but Honda still did not offer a fairing. ^[51]

Honda sold more than 97,000 units of the GL1000 in the United States between 1975 and 1979. ^[15]

1976 GL1000 engine close up

Honda Gold Wing GL1100 Full

2nd Generation

GL1100(SC02)

Gold Wing GL1100

1980 Honda Gold Wing GL1100
Assembly	Japan '79–'80; Marysville, Ohio '80–'83
Engine	1,085 cc (66.2 cu in) SOHC, flat-four [60]
Bore / stroke	75.0 mm × 61.4 mm (2.95 in × 2.42 in)
Compression ratio	9.2:1
Power	81 hp (60 kW) @7000 rpm [61] [62]
Torque	88 N⋅m (65 lbf⋅ft) @5500 rpm [61] [62]
Ignition type	Electronic
Transmission	5-speed manual
Frame type	Steel full-duplex cradle
Suspension	F: Air-assisted telescopic fork, 148 mm (5.8 in) travel; anti-dive '82–'83 R: Air-assist shocks 80 mm (3.1 in) travel [63]
Brakes	F: Dual discs, 1-piston calipers '80–'81 R: Single disc, 1-piston caliper '80–'81 F: Dual discs, 2-piston calipers '82–'83 R: Single disc, 2-piston caliper '82–'83
Tires	F: 110/90-19 62H, R: 130/90-17 68H '80–'81 F: 120/90-18 65H, R: 140/90-16 71H '82–'83 [60]
Rake, trail	29.17 degrees/134 mm (5.3 in) '80–'81 [64] 29.17 degrees/132 mm (5.2 in) '82–'83 [65]
Wheelbase	1,605 mm (63.2 in) [63]
Dimensions	L: 2,340 mm (92 in) GL1100 Standard
Seat height	790 mm (31 in)
Fuel capacity	20 L (4.4 imp gal; 5.3 US gal)

After five years of the GL1000, the second-generation Gold Wing was released in 1979 as a 1980 model, and the GL1100 would be continued through the 1983 model year. The GL1100 was manufactured in Japan until May 1980 when Honda started assembling 1981 models at the Marysville Motorcycle Plant in Ohio, ^{[9] [66]} which had been making frames and parts for various models since 1974. ^[67] Gold Wings would be built at a rate of 150 units a day for the years 1981–1983. Engines were still being built in Japan, but Honda began to market the machine as being made in America. ^[68]

The Gold Wing faced competition from Japan in the form of the Suzuki GS1000 with an inline-four engine, and especially in the Kawasaki Z1300 that had a massive DOHC 1300cc straight-six engine with water cooling. Honda responded by increasing the displacement of the Gold Wing, and then followed-up by announcing the first Japanese full-dress tourer. ^[66] The new engine was more than just a GL1000 with a 3 mm larger bore, the alterations clearly emphasized torque over horsepower. ^[16] The cylinder heads were modified to improve combustion at low and middle engine speeds, transmission gear ratios were changed and the final drive ratio shortened to make more torque available at highway speeds. ^[55] The bore size for all four carburetors was again reduced by 1 mm, to 30 mm. ^[69]

The wheelbase was lengthened over that of the GL1000, and air suspension was added. ^{[16] [54]} The GL1100 had an adjustable seat, and for the first time used tubeless tires, mounted on black reverse ComStar wheels. ^[53] The naked Gold Wing, which would become known as the Standard model, weighed 589 pounds (267 kg) dry. ^[36] In spite of the fact that here were only minor changes to differentiate the GL1100 '81 edition from the previous year. ^[66]

Ridden by Emilio Scotto, the GL1100 is the bike that toured the world. Holding the record for the longest distance of any motorcycle total distance of 457,000 miles (735,000 km). ^[70]

All the 1982 Gold Wings had transmission ratios revised (again) to lower engine rpm at cruising speeds, new brakes with twin-piston calipers and wider tires on smaller wheels. ^[55] Dry weight for the GL1100 '82 was 595 pounds (270 kg). ^{[36] [66]}

Transmission gear ratios were revised yet again for the 1983 Gold Wings to lessen engine speed on the highway. ^[55] But the significant changes were not to the engine, they were to the running gear in this last year for GL1100s. Cast aluminum eleven-spoke wheels replaced the ComStars. The front suspension was endowed with TRAC anti-dive forks with an integrated fork brace, ^[53] and the rear suspension worked even with no air pressure. ^[66] Honda's first combined braking system, dubbed Unified Braking at the time, debuted in 1983; it engaged both front and rear brakes in unison when the brake pedal was applied. ^{[71] [72]} Dry weight for the standard GL1100 inched up to 599 pounds (272 kg). ^[36]

GL1100 Interstate

Honda went beyond the mechanical makeover of the naked Gold Wing in March 1980 by releasing the first Japanese turn-key tourer, the Interstate model (GL1100I) with a factory-installed full fairing, saddlebags and a removable trunk, plus a long list of optional extras including a stereo system. ^[73] This bike was called the De Luxe model (GL1100DX) in some markets. ^[69] The fairing was designed to protect both the rider and a passenger from the wind. Likewise, the saddlebags and trunk were intended to carry the baggage of two people. ^[24] This made the Interstate significantly heavier than the standard model, with a dry weight of 672 pounds (305 kg). ^[16] The almost identical Interstate model was made for 1981. ^[66]

The GL1100I '82 model offered more options, such as a new stereo, a 40-channel CB transceiver, and an on-board compressor to adjust the suspension air pressure. ^[53] Dry weight was 679 pounds (308 kg). ^{[36] [66]}

The GL1100I '83 received the engine and running gear updates of the standard model; dry weight increased to 686 pounds (311 kg). ^[66]

GL1100 Aspencade

Starting in 1982, Honda offered three different Gold Wing models. ^[53] With the introduction of the Aspencade (GL1100A) Honda took the full-dress tourer to a new level of luxury, with a larger seat, two-tone paint and more storage compartments, together with many options from the Interstate that were being included as standard. ^[16] All three brake disks on the GL1100A were internally ventilated. The additional items jacked up the dry weight to 702 pounds (318 kg). ^{[36] [66]}

The GL1100A '83 received the same engine and running gear updates of the other models. The Aspencade also got new front and rear brakes, with internally ventilated front discs (only), as well as a digital LCD instrument panel and some additional amenities for rider and passenger. Weight went up just a bit to 707 pounds (321 kg). ^[66]

Honda GL1100 Interstate

Honda Gold Wing GL1100 Full-Dresser

3rd generation

GL1200(SC14)

Gold Wing GL1200

Honda Gold Wing GL1200
Production	1983—1987
Assembly	Marysville, Ohio
Engine	1,182 cc (72.1 cu in) SOHC, flat-four
Bore / stroke	75.5 mm × 66 mm (2.97 in × 2.60 in)
Compression ratio	9.0:1
Ignition type	Electronic
Transmission	5-speed manual
Frame type	Steel full-duplex cradle
Suspension	F: Air-assisted, anti-dive telescopic fork, 5.5 in (140 mm) travel R:Air-assist shocks 4.1 in (100 mm) travel
Brakes	F: Dual discs, 2-piston calipers R: Single disc, 2-piston caliper
Tires	F: 130/90-16 67H, R: 150/90-15 74H
Rake, trail	30 degrees/4.6 in (120 mm)
Wheelbase	1,610 mm (63 in) [74]
Dimensions	L: 2,355 mm (92.7 in) GL1200 Standard
Seat height	780 mm (31 in)
Fuel capacity	22 L (4.8 imp gal; 5.8 US gal)

In 1983 Honda was facing a challenge in the marketplace from a new full-dress tourer, the Yamaha Venture XVZ 1200 with its DOHC four valve per cylinder V4 engine (as Yamaha's XS Eleven Venturer had challenged the GL1100 two years earlier). Honda hit back at the Milan motorcycle show late that year by announcing a new 1984 Gold Wing that pushed its four-cylinder engine design to its limits. The bored and stroked boxer produced more power and torque; a new final drive ratio gave the GL1200 taller gearing in order to reduce noise and vibration. ^[55] The four Keihin 32 mm CV carburetors were larger than those on the GL1100 engine, on the other hand, they were the same size as the '75–'76 GL1000 carbs. ^[46] Incorporating hydraulic actuation for the clutch, in addition to hydraulic tappets for the valves, made the new engine virtually maintenance-free. ^[16] In order to make the Gold Wing more nimble, front and rear wheel diameters contracted (and tire widths expanded) one more time. ^[75] The GL1200 was built on a new, stronger frame and despite all the improvements, the claimed dry weight of the naked bike remained unchanged at 599 pounds (272 kg) for the 1984 model year. ^[36]

1984 was the one and only year for the GL1200 Standard (which was not exported to Europe) for the reason that sales had decreased in favor of the Interstate and Aspencade models. This led to the decline of aftermarket manufacturers such as the Vetter Fairing Company. ^[76]

The GL1200's competitors were becoming more numerous. Last of the big Japanese manufacturers to do so, Suzuki finally entered the marketplace in 1985 with their full-dress tourer, the GV1400 Cavalcade with a DOHC, four valves per cylinder, V4 engine. In 1986 Yamaha enlarged the Venture's V4 engine to 1300cc, and Kawasaki introduced the ZG 1200 Voyager XII with a four-valve, DOHC, Inline-four engine. ^[75]

With three versions of the Gold Wing boxer motor spanning a dozen years, by 1987 further development of the flat-four engine was regarded as being constrained by the law of diminishing returns. ^[77] Piston displacement had been increased twice to generate more torque, but this also made each power stroke more intense. During the same time period, gear ratios had been raised to decrease engine RPM (boosting fuel economy and reducing vibration as well as noise levels) which in turn made pulses through the drivetrain seem rougher to the rider because firing intervals were farther apart. The obvious way to deliver power more smoothly (as Irimajiri-san had demonstrated with the M1 engine) was to step up from four cylinders to six. ^[55]

GL1200 Interstate

Having introduced the full-dress Interstate with the GL1100, Honda used the GL1200I '84 to refine the Gold Wing's fairing so that it would come across as a basic part of the bike and not as an afterthought. The new model Interstate (still called De Luxe in Europe) had an automotive-style instrument panel up front and increased luggage capacity in back: 38 liters (1.3 cu ft) in each saddlebag plus another 63 liters (2.2 cu ft) in the trunk. ^[76] Dry weight for the 1984 Interstate was 697 pounds (316 kg). ^[75]

Despite giving the Gold Wing taller gearing the year before, in 1985 Honda shortened the overall gearing to improve performance. ^[55] There were many small changes to the GL1200I '85 but atypically its price was the same as it was the previous year, and at 699 pounds (317 kg) its weight was basically stable. ^[75]

The GL1200I '86 got more small updates, but the significant change was that all Gold Wing engines were being produced in Honda's Anna, Ohio plant from July 1985. ^{[16] [78]} Claimed dry weight for the 1986 Interstate was unchanged. ^[75] The GL1200I '87 got a new seat design with three-stage foam; ^[53] the weight was unchanged for 1987, the last year of the four-cylinder Gold Wing Interstate. ^[75]

GL1200 Aspencade

The GL1200A '84 had all the features of the GL1200I, plus a new Panasonic audio system that combined AM/FM radio, cassette player and an intercom between the rider and passenger. Unlike the analog instruments of the Interstate, the Aspencade had a dashboard with an LCD digital display. ^[53] The GL1200A also had foot boards for the passenger instead of footpegs. ^[75] Claimed dry weight for the 1984 Aspencade was 723 pounds (328 kg). ^[36] The price was unchanged for 1985, and the Aspencade received the same updates as the Interstate model for that year. Dry weight for the Aspencade was 728 pounds (330 kg) in both '85 and ’86.^{[ citation needed ]}

In 1986 Dolby noise reduction was added to the audio system, which was replaced with an improved Panasonic system in 1987. In its final year, the GL1200A got the same seat upgrade as the GL1200I '87 model and some amenities that had been optional were made standard, increasing the dry weight of the Aspencade to 743 pounds (337 kg). ^{[36] [53] [75]}

Fuel-injected models

Honda Gold Wing GL1200 Full-Dresser

In 1985 Honda marked the tenth anniversary of the Gold Wing by launching a gold-painted Limited Edition model (GL1200L) luxuriously equipped with cruise control, auto-leveling rear suspension, an electronic trip computer and a four-speaker audio system. ^{[16] [36]} The significant development was that the GL1200L was furnished with Honda's programmed fuel injection system, previously used on the turbocharged CX500T and CX650T (variants of the GL500 and GL650 Silver Wing). ^[79] Also known as the LTD, 5372 units were built and sold only in North America. Claimed dry weight for the GL1200L was 782 pounds (355 kg). ^[75]

To a limited extent, the Limited Edition turned out to be a sham when the SE-i (Special Edition—injected) debuted in 1986, as essentially a repainted GL1200L. ^[75] The SE-i had the same Dolby audio system as the GL1200A '86 and was only available in the US. ^{[53] [76]} This was the only year for the SE-i because the high cost of the fuel injection system forced Honda to return to carburetors for 1987. ^[55]

4th generation

GL1500(SC22)

Gold Wing GL1500

1998 Honda Goldwing GL1500SE
Production	1987—2000
Assembly	Marysville, Ohio
Engine	1,520 cc (93 cu in) SOHC, flat-six [80]
Bore / stroke	71 mm × 64 mm (2.8 in × 2.5 in)
Compression ratio	9.8:1
Power	75 kW (100 hp) @5200 rpm [80] [81]
Torque	150 N⋅m (110 lbf⋅ft) @ 4000 rpm [80] [81]
Ignition type	Electronic Solid-state Digital
Transmission	5-speed manual; electric reverse
Frame type	Steel full-duplex cradle
Suspension	F: Anti-dive fork 5.5 in (140 mm) travel R: Air-assisted shocks, 4.1 in (100 mm) travel
Brakes	F: Dual discs, 2-piston calipers R: Single disc, 2-piston caliper
Tires	F: 130/70-18 63H, R: 160/80-16 75H
Rake, trail	30 degrees/111 mm (4.4 in) [82]
Wheelbase	1,690 mm (67 in)
Dimensions	L: 2,630 mm (104 in) GL1500
Seat height	30.3–29.1 in (770–740 mm) [46]
Fuel capacity	23 L (5.1 imp gal; 6.1 US gal)

GL1500 with the dashboard visible

A new design team began work on the fourth-generation Gold Wing in 1984. Honda describes prototype testing as involving sixty developmental stages, and building fifteen different test bikes, including one made from a GL1200 frame coupled with the original M1 engine so that a six-cylinder could be compared to a four-cylinder head-on. ^{[16] [83]} This early '70s prototype had an influence far beyond what the M1's initial designers could have expected. ^[17]

New Gold Wing engine design goals were smoothness, quietness and enormous power. ^{[16] [53]} Ultimately, a redesigned Gold Wing made its debut at the 1987 Cologne Motorcycle Show, 13 years after the original GL1000 was first shown to the public at the same venue, and the GL1500 brought the most changes seen to the Gold Wing series since its inception. The biggest difference was that the flat-four engine was replaced with a flat-six engine. ^[83] Although the GL1500 still used carburetors, there were just two large 36 mm CV Keihins supplying all six cylinders, the first time any Gold Wing had less than one carb per cylinder. ^[46]

Honda also enclosed the entire motorcycle in plastic, giving it a seamless appearance. The seat height was lowest yet on a Gold Wing, the passenger back rest and trunk were integrated, and a central mechanism locked the trunk lid and saddlebags. Rear suspension air pressure was adjusted by an on-board compressor. One major innovation was the addition of a "reverse gear", which was actually a creative use of the electric starter motor linked to the transmission. Because of the size and weight, Honda felt that some people would have problems backing it up. ^{[53] [83]}

The new Gold Wing had grown in nearly every dimension. A larger windshield, longer wheelbase, two more cylinders, more horsepower, more bodywork, more electronics, more accessories and more mass: 794 pounds (360 kg) dry. ^[77] Options include a passenger audio control and rear speakers, CB radio, auxiliary lights and exterior trim. ^[53] In another first for the GL1500, 1988 was the year Honda exported Gold Wings from the US to Japan for the first time. ^{[84] [36]}

For 1989 Honda modified the brake discs, and raised the price. Brake discs were modified again in 1990, as were the carbs and camshafts, without a price increase. ^[53] The claimed GL1500 dry weight for '90 was 798 pounds (362 kg). In addition, a Gold Wing 15th Anniversary Special Edition model (GL1500SE) made its debut in 1990. ^[83]

The following year, to celebrate the 10th anniversary of American-made Gold Wings, every bike produced for 1991 came with a numbered plaque and anniversary edition insignia. There were three '91 models: Aspencade indicated the regular GL1500 model; the luxurious Special Edition from the year before carried on as the SE model; and the Interstate name denoted a stripped-down model. ^[53]

GL1500 Aspencade

When the Honda of America Manufacturing (HAM) plant in Marysville, Ohio produced its 500,000th vehicle in 1991, it was a Gold Wing Aspencade. ^[85] The claimed dry weight for the GL1500A '91 was 800 pounds (360 kg). Honda began offering extra cost paint options, and Honda Canada inaugurated Canadian Edition Gold Wings in '92. ^{[36] [83]}

Beginning in 1993, all GL1500 rocker arms pivoted on needle bearings, and the cruise control was updated to directly read crankshaft speed for enhanced precision. 1994 was the seventh year of GL1500 production (longer than any of its forerunners) and nothing significant changed except the asking price. ^{[36] [53] [83]}

1995 was the 20th anniversary of the Gold Wing. ^[16] American Honda published a special hard-cover book Vreeke, Ken (1994). Gold Wing: The First 20 Years (Twentieth Anniversary ed.). ISBN   0964249103. All 1995 models got commemorative emblems, cosmetic changes, a thinner and narrower seat and suspension improvements which reduced ground clearance, contributing to an even lower seat height (offsetting the weight gain). ^{[30] [53]} The GL1500A was at its heaviest in '95; the claimed dry weight would stay at 802 pounds (364 kg) until the end of this model. ^{[36] [83]}

The 1996 Aspencade received an upmarket audio system that had been exclusive to the GL1500SE. Yet another milestone was reached in mid-1996 when a Gold Wing Aspencade was the millionth Honda motorcycle made in America to roll off the assembly line at the Marysville Motorcycle Plant. ^{[16] [86]} The GL1500 family got bigger when Honda created the first GL1500C Valkyrie in May 1996 (for the 1997 model year). The Valkyrie was the first naked GL since 1984. ^{[53] [83]}

1997 GL1500s received engine, transmission and final drive improvements first introduced on the GL1500C. A 1998 Gold Wing styling makeover extended to the engine with redesigned valve covers, but no price increase. Honda commemorated 50 years in America by adding 50th Anniversary emblems to all 1999 Gold Wings; the GL1500A '99 price increased. The 2000 Gold Wings had chrome-plated valve covers, Canadian and American models also had gold-plated 25th Anniversary emblems marking 25 years since the first GL1000 debuted for the 1975 model year. ^{[83] [87] [88]}

The 2000 model was the last GL1500 Aspencade model. ^[83] A complete redesign of the Marysville Motorcycle Plant began In January 2000 to build the next Gold Wing, ^[16] and stories soon came out in the motorcycle press that the Gold Wing itself was being redesigned. ^[88] The GL1500 had been in production for 13 model years, which was as long as all of the four-cylinder Gold Wings combined; moreover, GL1500 engine continued to be used in the Valkyrie through the 2003 model year. ^{[89] [90]}

GL1500 SE

The original 15th Anniversary Special Edition model had a vented windshield, additional lights, upgraded sound system, two-tone paint with special insignia, adjustable passenger floorboards and adjustable foot pegs as well as foot heaters for the rider. In 1990 It had a weight of 807 pounds (366 kg) dry. The GL1500SE '91 was essentially unchanged, though weight and price were up a bit at 809 pounds (367 kg). ^{[36] [83]}

Hitherto optional rear speakers and CB radio became standard on the GL1500SE '93; boosting both its weight—813 pounds (369 kg). ^{[36] [83]}

The GL1500SE '97 had powertrain updates. Honda marked its 50th anniversary in 1999 without a GL1500SE price increase, and the American-made GL1500SE '99 that was exported to Japan got a two-tone paint job. More significantly, the export model got an exhaust air-injection system along with carburetor modifications in order to pass Japan's new emission regulations. ^{[31] [83] [84]}

The 25th Anniversary GL1500SE in 2000 had a claimed dry weight from 1995 to 2000 was 816 pounds (370 kg). ^[83]

GL1500 Interstate

The GL1500I '91 model had its weight and price cut by eliminating the reverse gear, cruise-control, the passenger footboards, and by replacing the audio system with a small Kenwood radio. The seat was lowered by 0.8 inches (20 mm). Claimed dry weight for the 1991 Interstate was 760 pounds (340 kg). In 1992 the Kenwood radio was, in turn, replaced by a new Panasonic 25-watt-per-channel sound system with intercom. Weight for the GL1500I '92 rose slightly to 767 pounds (348 kg). ^{[36] [83]}

As with the other 20th Anniversary models, the cost of a GL1500I '95 jumped. The last GL1500I was the 1996 model. Claimed dry weight for '95 and '96 was 769 pounds (349 kg). ^{[36] [83]} The Interstate model was discontinued, replaced in 1997 by the Valkyrie Tourer (GL1500CT) as well as the 1999 Valkyrie Interstate (GL1500CF). ^{[91] [92]}

1992 Gold Wing GL1500 Aspencade

Honda Gold Wing GL1500SE

5th generation

GL1800(SC47)

Honda Gold Wing GL1800

Honda Gold Wing GL1800
Manufacturer	Honda Motor Co., Ltd
Also called	GL1800A (with ABS)
Production	2001–2017
Assembly	Marysville, Ohio USA (2000—2009); Kikuchi, Kumamoto Japan (2011—2017)
Predecessor	GL1000, GL1100, GL1200, GL1500
Class	Touring
Engine	1,832 cc (111.8 cu in) water-cooled flat-six, SOHC, 2 valves per cylinder; with PGM-FI
Bore / stroke	74 mm × 71 mm (2.9 in × 2.8 in) [93]
Compression ratio	9.8:1
Power	88 kW (118 hp) [94]
Torque	167 N⋅m (123 lbf⋅ft) [94]
Ignition type	Digital electronic
Transmission	5-speed manual, plus electric reverse
Frame type	Diamond multi box-section aluminum alloy
Suspension	F: 45mm cartridge fork with anti-dive system, 140 mm (5.5 in) travel R: Single-sided swing arm with electronically controlled preload, 105 mm (4.1 in) travel [93]
Brakes	F: Dual discs, 3-piston calipers R: Single disc, 3-piston caliper
Tires	F: 130/70R-18 63H, R: 180/60R-16 74H
Rake, trail	29.25 degrees/109 mm (4.3 in) [93]
Wheelbase	1,692 mm (66.6 in)
Dimensions	L: 2,635 mm (103.7 in) W: 945 mm (37.2 in) H: 1,455 mm (57.3 in) [95]
Seat height	29.1 in (740 mm)
Weight	799 lb (362 kg) GL1800A [93]  (dry) 858 lb (389 kg) (fuel tank empty) 898 lb (407 kg) [96]  (wet)
Fuel capacity	25 L (5.5 imp gal; 6.6 US gal)
Fuel consumption	30 mpg‑US (13 km/L; 36 mpg‑imp) (low) 40 mpg‑US (17 km/L; 48 mpg‑imp) (high) 36 mpg‑US (15 km/L; 43 mpg‑imp) (avg) [96]
Related	Valkyrie Rune; Valkyrie (F6C); F6B

The first new model for 13 years, the 2001 GL1800 had a larger 1,832 cc (111.8 cu in) engine with fuel injection, and a power increase from 74 kW (99 bhp) to 87 kW (117 bhp). The GL1800's extruded aluminium frame, comprising 31 elements (barely half the GL1500's number) resulted in an overall weight decrease. Options included ABS braking.^{[ citation needed ]}

The 2006 model had further options: an airbag, ^[14] in-dash GPS called Internavi, with audio information provided through the speakers and headset cables, plus a rider "comfort package" comprising saddle heating, heated grips, and adjustable engine-air vents ahead of the driver's foot pegs.^{[ citation needed ]}

Update(SC68)

The 2010 model year was the last to be produced in the United States, and no 2011 model year Gold Wings were produced while manufacturing was transferred to Japan in 2012. Some retailers and aftermarket traders group all GL1800 models into two categories: US made GL1800s (2001–2010) are "1st Generation", ^[97] and Japanese-built GL1800's (2012-2017) are "2nd Generation". ^{[98] [99] [27] [100]}

2nd Gen GL1800 had minor updates: ^[16] restyled bodywork made the fairing and saddlebags seem less bulbous, despite being more capacious. A revised fairing gave better protection to the rider's legs, with vents channelling warm engine air onto the rider's feet. ^[101] The trunk, fairing pockets and saddlebags gave a storage capacity of 150 litres (5.3 cu ft). ^[102] The instrument display has a brighter screen, an updated satellite navigation / radio, and a revised six-speaker audio system with MP3 and iPod connectivity. ^{[13] [103]}

2012 Gold Wing GL1800 model for Japanese market, with windshield wiper

6th generation

2018 GL1800(SC79)

Honda Gold Wing GL1800

2018 Honda Gold Wing GL1800
Manufacturer	Honda Motor Co., Ltd
Production	2018 - present
Assembly	Kumamoto, Japan
Class	Touring
Engine	1,833 cc (111.9 cu in) water-cooled flat-six, SOHC, 4 valves per cylinder; with PGM-FI [104]
Bore / stroke	73 mm × 73 mm (2.9 in × 2.9 in)
Compression ratio	9.8:1
Power	93 kW (125 hp) at 5,500rpm
Torque	170 N⋅m (130 lbf⋅ft) at 4,500rpm
Transmission	6-speed manual, plus electric reverse 7 speed [Dual clutch transmission], plus electric reverse
Frame type	Aluminium die cast, twin tube
Suspension	F: Double wishbone R: Pro-link
Brakes	F: Dual discs, 6-piston calipers R: Single disc, 3-piston caliper
Tires	F: 130/70R-18 63H R: 200/55R-16 74H
Rake, trail	30.5 degrees/109 mm (4.3 in) [93]
Wheelbase	1,695 mm (66.7 in)
Dimensions	L: 2,475 mm (97.4 in) 2,575 mm (101.4 in)(Tour) W: 925 mm (36.4 in)(MT) 905 mm (35.6 in)(DCT) H: 1,340 mm (53 in) 1,430 mm (56 in)(Tour)
Seat height	745 mm (29.3 in)
Weight	365 kg (805 lb) MT 364 kg (802 lb) DCT 380 kg (840 lb) Tour MT 383 kg (844 lb) Tour DCT w/ airbag (wet)
Fuel capacity	21.1 L (4.6 imp gal; 5.6 US gal)
Oil capacity	4.4 L (0.97 imp gal; 1.2 US gal) MT 5.6 L (1.2 imp gal; 1.5 US gal) DCT
Fuel consumption	5.6 L/100 km (50 mpg‑imp)
Turning radius	3.4 m (11 ft)

For its 6th generation in 2018 Honda produced a completely redesigned Gold Wing. ^{[105] [106]} The new model has a new four-valve engine and is available in two versions: the standard Gold Wing (replacing F6B bagger) and the "top trunk" Gold Wing Tour. Sportier in appearance, technologically more advanced, and more compact, the 2018 Gold Wing is 41 kg (90 lb) lighter than before. Its new robotically welded frame has a double wishbone front suspension, resembling the Duolever from BMW. ^[107] New features include throttle by wire, four ride modes, traction control, LED lighting, hill start assist, Apple CarPlay, ^[108] and (on the Tour model) electronically adjustable suspension. Options include automatic dual clutch transmission with a forward and reverse "walking mode". ^{[3] [109]}

In mid-June 2020, Honda introduced Android Auto. ^[110] For 2021, Honda increased the size of the top trunk from 50 litres to 61 litres. The passenger's back seat rest features a more relaxed angle with thicker foam and taller profile. Speakers were changed to 45 watt with automatic volume adjustment and standard XM radio. Rear turn signals were changed to all red. ^[111]

2018 Honda Gold Wing Tour

F6C "Valkyrie"

Main article: Honda Valkyrie

2000 Valkyrie Interstate in Portugal

"Limited Edition" Valkyrie Rune

In 1997 Honda brought back an incarnation of the "Standard" or "classic" Gold Wing, renamed the Valkyrie in the US, and called F6C in the rest of the world. It had a higher performance engine, based on the GL1500, in a cruiser-style frame. The Valkyrie Tourer version had a windshield and saddlebags. A more touring-oriented version was introduced in 1999 as the Valkyrie Interstate with a full fairing, saddlebags and trunk. It was released as a naked bike, but also had a Tourer and an Interstate model. These two incarnations lasted relatively short and were (re-absorbed by the Goldwing line.^{[ citation needed ]}

These Valkyrie models were dropped due to slow sales, leaving the standard Valkyrie, which was discontinued after the 2003 model year and since then intermittently new Valkyrie models introduced into the market as "limited" editions. One such case was the in 2004 released Limited Edition model, the Valkyrie Rune, complete with 1,832 cc (111.8 cu in) engine and unique styling.^{[ citation needed ]}

The Valkyrie engine is based on the Gold Wing engine, but has solid lifters instead of hydraulic lifters, six carburetors instead of the Goldwing's two (carbs ≤ 2000, FI ≥ 2001), more aggressive camshafts, a free flowing exhaust, and altered ignition timing to increase performance.^{[ citation needed ]}

Valkyrie revival

At the 2013 Tokyo Motor Show, Honda revealed a new naked version of the GL1800, the 2014 Valkyrie, using the same 1832cc six-cylinder engine as the Gold Wing but weighing 70 kg (150 lb) less. ^{[112] [113]} The new Valkyrie has increased rake and trail, front and rear suspension revised for the reduced weight, 50/50 weight distribution and large tires after the fashion of sport-bikes. ^[114] Going beyond the naked bike genre, the Valkyrie's horsepower-to-weight ratio puts it clearly into the muscle bike class. ^{[115] [116]}

F6B "Bagger"

2013 model year Gold Wing F6B

In 2013, Honda brought out a new variation on the traditional Gold Wing, itself being available in two models, The F6B and F6B Deluxe. The F6B is basically a greatly stripped-down version of the 'standard' Gold Wing with most of the chrome trim being 'blacked out', giving the F6B a look that should appeal to many cruiser buyers. It is affectionately known as the Bagger. ^[117] The rear trunk has been eliminated and the windshield is much smaller. The seat is changed for both the passenger and the rider with the most obvious difference being that the passenger no longer has the oversize backrest – a result of the removal of the trunk. The F6B Deluxe does, however, come with a small passenger backrest, heated grips, self cancelling turn signals & center stand as standard equipment. The basic design is, otherwise, the same as the full blown Gold Wing except that there is no reverse gear and early models did not have cruise control. For 2018 this model is now just called the standard Gold Wing. ^{[3] [109]}

In popular culture

The 4th generation Honda GL1500 Goldwing served as basis for Gunmax's Gun Bike in Japanese mecha anime series The Brave Police J-Decker . ^[118]

See also

• Honda Pan European
• Harley-Davidson FL
• BMW R1200RT and K1600
• Kawasaki Z1300
• Suzuki GV1400 Cavalcade
• Yamaha XS Eleven, V-Max, Yamaha Venture Royale and Royal Star Venture

Notes

1. "GOLD WING Tour 2018 Specifications". Honda.co.uk . 2017. Archived from the original on 3 August 2020. Retrieved 31 December 2017.
2. Jon McDevitt (8 March 2018), 2018 Honda Gold Wing Dyno: Honda's 1,833cc liquid-cooled engine power delivery, Cycle World, retrieved 12 July 2018
3. Gales, Morga (24 October 2017). "The 2018 Gold Wing Is Lighter, More Compact, and Sportier Than Ever". Cycle World . Retrieved 11 December 2017.
4. Honda to launch 1000cc flat-4? Motor Cycle News , 20 March 1974, p.1 (front cover). Retrieved 13 March 2022
5. Duchene, Paul (4 July 2005). "Honda's Gold Wing Goes the Distance". New York Times. Retrieved 9 November 2013.
6. "Honda Gold Wing: A legend in its own time". Washington Times. 10 March 2011. Retrieved 21 November 2013.
7. "Honda Announces More New Models for 2013". Honda Media Newsroom. American Honda Motor Co. 4 September 2012. Archived from the original on 8 September 2012. Retrieved 4 December 2013. Last but certainly not least is the 2013 Gold Wing, the true icon of two-up long-distance luxury travel with U.S. sales approaching 550,000 units since its introduction in 1975.
8. "autoblog news article". 30 July 2009. Retrieved 19 March 2010.
9. Sawyers, Arlena (8 June 2009). "Gold Wing, Honda's top motorcycle, finds its destiny in Ohio". Automotive News. Crain Communications. Archived from the original on 18 January 2021. Retrieved 13 March 2022.
10. Tuttle, Mark (12 May 2010), "New Honda Gold Wing News", Rider Magazine, archived from the original on 2 September 2010, retrieved 19 November 2010
11. "Honda Gold Wing GL1000". 240 Landmarks of Japanese Automotive Technology. Society of Automotive Engineers of Japan. Archived from the original on 23 April 2017. Retrieved 12 November 2013. The Gold Wing GL1000 accelerated the demand for larger motorcycles in the American market. A long-distance touring model rather than a sport model, it incorporated innovative technologies and ideas.
12. Burns, John (21 September 2012). "The Best of Ten Best: Careening through the cream of the last 36 crops". Cycle World. Bonnier Corp. p. 3. Retrieved 6 December 2013.
13. Williams, Don (9 April 2011). "2012 Honda Gold Wing | First Ride". Ultimate MotorCycling. Retrieved 21 November 2013.
14. "Gold Wing features at Honda Canada". Archived from the original on 7 August 2011. Retrieved 19 March 2010.
15. Salvadori, Clement (May–June 2007). "The Honda GL1000 Gold Wing". Motorcycle Classics. Ogden Publications. Retrieved 12 November 2013. Looking back, it's easy to think the first Honda GL1000 Gold Wing in 1975 was a revolutionary motorcycle. It was, in fact, evolutionary, built to appeal to the American bigger-is-better theory.
16. "The History of Honda Gold Wing Development". Honda Worldwide. Honda Motor Co. Retrieved 7 November 2013.
17. "M1: Long Live the King". Honda Powersports. American Honda Motor Co. Retrieved 7 November 2013.
18. "Soaring in the 2nd =American Honda Motor Co". 2 September 2003.{{cite web}}: Missing or empty |url= (help)
19. The traditional BMW Motorrad layout, a wet-sump unit construction boxer-twin using shaft final drive, goes back to the R32 model that began production in 1923.
20. English, Bob (20 April 2010). "The engine that Benz built still survives". The Globe and Mail (Canada). Archived from the original on 20 December 2013. Retrieved 6 January 2014. …Benz gave the world its first horizontally opposed style engine in 1897 – later to be known as 'boxer' because the pistons punch back and forth. He called it the 'contra engine.'
21. Biker, Maxx (26 November 2008). "2009 Honda Gold Wing". Top Speed. Retrieved 6 December 2013. A true limousine on two wheels, the Gold Wing comes fitted with airbags, ABS, Comfort Package, heated seats and feet warmers, features without which any normal rider wouldn't be able to pun the number of miles that this bike is capable of.
22. "Suzuki GT750". 240 Landmarks of Japanese Automotive Technology. Society of Automotive Engineers of Japan. Archived from the original on 6 February 2012. Retrieved 12 September 2013. This motorcycle had a water-cooled, 2-stroke, 3-cylinder engine that provided good acceleration over a wide speed range from low to high.
23. Two-stroke water-cooled engines from The Scott Motorcycle Company go back to the 1920s.
24. "Designers Talk: GL1800". Honda Worldwide. Honda Motor Co. Retrieved 8 November 2013.
25. "Invention of the boxer engine: The Benz "contra engine" of 1897". Global Media Site. Daimler AG. 1 February 2007. Retrieved 6 January 2014. The final evolutionary stage of the Benz racing car equipped with a contra engine was the 20-hp Benz vehicle introduced in 1900. Whereas the two previous models both had a two-cylinder boxer unit, this vehicle – developed by Georg Diehl – featured a four-cylinder boxer with a 5,440-cc displacement.
26. Frank, Aaron (8 August 2012). "The Making of the Honda CB750 | 'The King of Motorcycles'". Motorcyclist magazine. Bonnier Corp. Retrieved 20 January 2014.
27. "2009 Honda GL1800 Gold Wing Road Test". Rider Magazine. April 2009. Archived from the original on 2 December 2013. Retrieved 23 November 2013.
28. Gales, Morgan (16 March 2018). "Getting Technical With The 2018 Honda Gold Wing". Motorcyclist . Retrieved 23 March 2018.
29. Duchene, Paul (13 July 1999). "How Honda Put The Glitter On Gold Wing". Chicago Tribune. Retrieved 8 November 2013.
30. "Full-Dress Heavyweight Tourers". Motorcycle.com. VerticalScope. Retrieved 8 December 2013.
31. Colker, David (25 February 1999). "Luxury Bikes Can Bring Back That Old Feeling for Motor Touring". Los Angeles Times. p. 1. Retrieved 8 December 2013. I'm not dead, just touring.
32. J. Joshua Placa (28 July 2011). "A Luxury-Touring Rethink". Motorcycle.com. VerticalScope. Retrieved 17 December 2013.
33. Szymezak, Pascal. "Début de la légende". La saga GoldWing (in French). Fédération des GoldWing Club de France. Archived from the original on 19 December 2013. Retrieved 11 December 2013.
34. Truett, Richard (7 March 1996). "Valkyrie, The Un-harley". Orlando Sentinel. Retrieved 15 November 2013. It is often said that Harley-Davidson is the last American motorcycle manufacturer. Perhaps the last American-owned manufacturer would be more accurate. Honda has been building motorcycles in America since the late '70s at its plant in Marysville, Ohio.
35. Ric Anderson; Richard Backus (November–December 2005). "1972 Moto Guzzi Eldorado". Motorcycle Classics. Ogden Publications. Retrieved 15 December 2013. The Moto Guzzi Eldorado was the biggest weapon in a snout-to-snout battle with Harley-Davidson
36. "Honda Gold Wing At 20: Smooth Sailing For Bikers". Wayback Machine. 14 May 1995. Archived from the original on 6 May 2013. Retrieved 14 October 2022.
37. White, Trevor (4 January 1999). "The Origins of GWEF – Some Facts and Some Thoughts". Gold Wing European Federation. Archived from the original on 9 January 2014. Retrieved 11 December 2013. We ride a motorcycle that can take us from one end of Europe to the other with ease and comfort – just with a twist of the wrist.
38. Visordown quote: "The Honda ST1100 Pan European was one of those bikes that quietly got on with doing the job it was designed to do. And that was to provide something just short of a full-dress touring bike in a slightly more manageable (and cheaper) form, at the behest of the European, not US, market.
39. "Gold Wing F6B: The story behind this remarkable machine". Honda Powersports. American Honda Motor Co. Retrieved 7 November 2013.
40. Branch, Ben (3 April 2017). "A BRIEF HISTORY OF THE HONDA GOLD WING". silodrome.com. Retrieved 26 February 2019.
41. Sheehan, Dave (October 2013). "Honda, Triumph, and the Race For the 750 Superbike". Motorcycle Classics . Retrieved 16 January 2014.
42. Floria, Phillip. "A quick look at the beginning of the Honda Gold Wing". The Biker eNews. Phillip Floria. Archived from the original on 5 December 2008. Retrieved 16 January 2014.
43. "Prototyp (M1) 1972–1974". GoldWing-Technik Details (in German). GoldWing Freunde Region Stuttgart. Archived from the original on 3 February 2014. Retrieved 16 January 2014.
44. Washington, Randall. "Musings on Honda's 50th Anniversary in America". MotoHistory. Ed Youngblood. Archived from the original on 1 February 2014. Retrieved 20 January 2014. Introduced in 1975, the Honda GL 1000 was a stunning technical achievement. The original, unfaired Gold Wing was the world's biggest, heaviest, and second fastest bike available at the time (only the mighty Kawasaki Z1 was swifter). Novel features included a liquid-cooled flat four engine, belt-driven overhead cams, shaft drive, triple disk brakes, under-seat fuel tank, counter-rotating alternator, two oil pumps, 'floating' piston pins, faux top shelter 'tank' and detachable back-up kick-start arm, to mention a few.
45. "Honda Gold Wings 1975–77". hondabikespecs.com. Archived from the original on 28 July 2011. Retrieved 13 November 2013.
46. "Honda Goldwing Specifications" (PDF). Goldwing Chrome. Gold Wing Chrome. Archived from the original (PDF) on 8 October 2010. Retrieved 12 November 2013.
47. "Honda GL1000 K2 Goldwing Test". Motorcyclist Illustrated. December 1977. Retrieved 20 January 2014.
48. "GL1000". Goldwing Owners Club of Great Britain. Archived from the original on 4 February 2013. Retrieved 13 November 2013.
49. Szymezak, Pascal. "Goldwing 1000". La saga GoldWing (in French). Fédération des GoldWing Club de France. Archived from the original on 24 March 2008. Retrieved 13 January 2014.
50. (in German)Internationale Fahrrad- und Motorrad-Ausstellung
51. Saunders, Steve. "Goldwing History". Steve Saunders Goldwing Page. Archived from the original on 4 July 2016. Retrieved 18 January 2014.
52. Vetter, Craig. "Honda GL1000 and the Vetter years". craigvetter.com. Web Partners. Archived from the original on 5 April 2010. Retrieved 13 November 2013. As we got comfortable with each other, Honda gave us permission to use our loaner GLs to make hardware to fit up my own Windjammer III fairing. Consequently, we had Windjammer brackets for GLs before Honda dealers even had the motorcycles.
53. "Gold Wing Spotter's Guide". News & Views. American Honda Motor Co. 3 September 2003. Retrieved 8 November 2013.
54. "Goldwing historique" (in French). Honda Werther. Archived from the original on 15 October 2005. Retrieved 11 December 2013.
55. "The Human Touch". Honda Powersports. American Honda Motor Co. 8 January 2013. Archived from the original on 16 January 2014. Retrieved 8 November 2013.
56. Szymezak, Pascal. "Commercialisation". La saga GoldWing (in French). Fédération des GoldWing Club de France. Archived from the original on 24 March 2008. Retrieved 15 January 2014.
57. Andrea B. "Storia della Goldwing". www.andreagoldwing.com (in Italian). Archived from the original on 20 February 2014. Retrieved 16 January 2014.
58. "GoldWing-Techik: Rückrufaktionen GL 1000". GoldWing-Forum. Karl-Heinz. Retrieved 18 January 2014.
59. "Search Safety Issues: Recalls, Investigations & Complaints". NHTSA.GOV. U.S. Department of Transportation. Retrieved 18 January 2014.
60. "HONDA GL1100 '80–'82 GL1100I '80–'82 GL1100A '82 PARTS MANUAL" (PDF). Parts Manual. Honda. Archived from the original (PDF) on 8 October 2010. Retrieved 16 November 2013.
61. "Honda GL1100 Gold Wing". www.hondagoldwings.com. Archived from the original on 19 February 2014. Retrieved 16 November 2013.
62. Reijmerink, Teus. "Specifications GL 1100". Goldwingworld. Archived from the original on 22 June 2015. Retrieved 16 November 2013.
63. "Honda Gold Wings 1983". hondabikespecs.com. Archived from the original on 24 September 2015. Retrieved 16 November 2013.
64. Honda GL1100 Interstate Owner's Manual 1981 (PDF). Honda Motor Co. 1980. p. 94. Archived from the original (PDF) on 21 June 2015. Retrieved 19 November 2013.
65. Honda GL1100 Aspencade Owner's Manual 1982 (PDF). Honda Motor Co. 1981. p. 97. Archived from the original (PDF) on 13 November 2014. Retrieved 19 November 2013.
66. "GL1100". Goldwing Owners Club of Great Britain. Archived from the original on 4 February 2013. Retrieved 13 November 2013.
67. Szymezak, Pascal. "Usines GoldWing aux USA". La saga GoldWing (in French). Fédération des GoldWing Club de France. Archived from the original on 24 March 2008. Retrieved 20 January 2014.
68. "A Brief History of Honda's American Manufacturing". Honda Media Newsroom. American Honda Motor Co. 2 September 2003. Archived from the original on 1 February 2014. Retrieved 4 December 2013.
69. Szymezak, Pascal. "GoldWing 1100". La saga GoldWing (in French). Fédération des GoldWing Club de France. Archived from the original on 24 March 2008. Retrieved 20 January 2014.
70. Glenday, Craig (2009). Guinness World Records 2009. Random House. p. 176. ISBN   9780553592566.
71. "Advanced Brake Systems: Q&A". Honda Worldwide. Honda Motor Co. Retrieved 8 November 2013.
72. "2008 Honda Powersports Technology". Honda Media Newsroom. American Honda Motor Co. 4 June 2007. Archived from the original on 1 February 2014. Retrieved 3 December 2013.
73. "WE DIDN'T INVENT TOURING . . " (PDF). Honda Goldwing GL1500. American Honda Motor Co. October 2000. Archived from the original (PDF) on 24 September 2015. Retrieved 16 November 2013.
74. "Honda Gold Wings 1984". hondabikespecs.com. Retrieved 18 November 2013.
75. "GL1200". Goldwing Owners Club of Great Britain. Archived from the original on 5 February 2013. Retrieved 13 November 2013.
76. Szymezak, Pascal. "GoldWing 1200". La saga GoldWing (in French). Fédération des GoldWing Club de France. Archived from the original on 24 March 2008. Retrieved 20 January 2014.
77. Szymezak, Pascal. "GoldWing 1500". La saga GoldWing (in French). Fédération des GoldWing Club de France. Archived from the original on 24 March 2008. Retrieved 27 January 2014.
78. "Honda of America Records Many Industry Firsts". Honda Media Newsroom. American Honda Motor Co. 10 September 2004. Archived from the original on 1 February 2014. Retrieved 4 December 2013.
79. "Fuel Injection System for Small Engines". Honda Worldwide. Honda Motor Co. Archived from the original on 30 June 2013. Retrieved 26 January 2014.
80. "Honda GL1500 Gold Wing (1988–2000)". Motorcycle News. Bauer Media. Retrieved 18 November 2013.
81. Reijmerink, Teus. "Specifications GL 1500". Goldwingworld. Retrieved 18 November 2013.
82. GL1500 Service Manual and Electrical Troubleshooting Manual. Honda Motor Co. p. 2-2.
83. "GL1500". Goldwing Owners Club of Great Britain. Archived from the original on 5 February 2013. Retrieved 13 November 2013.
84. "Honda Announces that Modified US-Manufactured Gold Wing SE Touring Bike Complies with New Japanese Motorcycle Emission Regulations". Honda Worldwide. Honda Motor Co. 25 August 1998. Retrieved 14 November 2013.
85. "Honda Chronology (1999–1990)". Honda Media Newsroom. American Honda Motor Co. 9 June 2005. Archived from the original on 24 November 2010. Retrieved 3 December 2013.
86. Dever, Paul (9 August 2009). "Millionth Motorcycle Made at Marysville, Honda is Happy". The Auto Channel. Retrieved 13 November 2013.
87. "GL1500SE Gold Wing" (PDF). Honda. August 1999. Retrieved 16 November 2013.
88. Bill, Andrews (20 July 2000). "Top-notch Gold Wing: A Caddy On 2 Wheels". Orlando Sentinel. Retrieved 8 November 2013. The modern Gold Wing's appearance really hasn't changed since its last overhaul 12 years ago, which included the addition of two more cylinders and upped the displacement to 1520cc's. On the 25th anniversary we get a couple of gold emblems proclaiming it as such, with few other modifications.
89. Verpeide, Dag (10 October 2008). "About The Valkrie". valkyrienorway.com. Retrieved 14 November 2013.
90. "Valkyrie 03" (PDF). A1763. American Honda Motor Co. August 2002. Retrieved 14 November 2013.
91. "Honda F6C Valkyrie (1996–2005)". Motorcycle News. Bauer Media. Retrieved 13 November 2013.
92. Andrews, Bill (17 June 1999). "The Interstate Valkyrie Has The Soul Of A Hot Rod While Retaining Some Of The Comfort Of The Gold Wing". Orlando Sentinel. Retrieved 14 November 2013. Now Honda has come almost full circle by adding a full fairing, radio, and touring trunk. Add a pinch of '50s retro style, and you've got the Valkyrie Interstate.
93. "Gold Wing - Specifications". Honda.com. American Honda Motor Co. 2 September 2003. Retrieved 20 November 2013.
94. "Honda GL 1800 Gold Wing 2001 Specifications". AllMotoInfo. Retrieved 19 November 2013.
95. Abrahams, Dave (26 September 2011). "Honda Goldwing is a very grand tourer". Independent Online. Independent Newspapers. Retrieved 25 November 2013. …the 1832cc Goldwing is mechanically old-school. The architecture of the flat-six engine is the same as the GL1000 of 1975, with a low (9.8:1) compression ratio, and SOHC, two-valves-per-cylinder valvegear. The only significant changes in more than 36 years of production have been the addition of two extra cylinders and the substitution of two 40mm Keihin throttle bodies for the original downdraught carbs.
96. "Honda GL1800 Gold Wing". Motorcyclist Online. Source Interlink Media. 24 February 2009. Retrieved 19 November 2013. Transcontinental meditations on the land yacht that zigs
97. "GoldWing 1st Generation (Front) Bike Map". Küryakyn Web Site. Küryakyn Holdings, LLC. Retrieved 23 November 2013.
98. "GoldWing 2nd Generation (Front) Bike Map". Küryakyn Web Site. Küryakyn Holdings, LLC. Retrieved 23 November 2013.
99. Note: These categories are somewhat is misleading, since the GL1800 itself is actually the 5th generation Gold Wing.
100. "2010 Honda Gold Wing GL1800 Road Test". Rider Magazine. June 2011. Archived from the original on 25 June 2013. Retrieved 23 November 2013. The GL1800—the fifth stage in the GL's evolution—has changed little since its 2001 debut, and with Gold Wing production moved from Ohio to Japan and no 2011 models produced, expectations ran high. As we chronicled last month, the 2012 Gold Wing will get many useful enhancements but not the complete overhaul many were hoping for.
101. Elvidge, Jamie (1 October 2011). "BMW K1600GTL vs. Honda GL1800 Gold Wing". Motorcyclist Online. Source Interlink Media. Retrieved 26 November 2013. The Honda shines in the luggage department, too, showing how decades of real-world research pays off. Capacity of the trunk and saddlebags is enormous, and their operation is very car-like, so you can stuff in your junk and snick it shut with one hand.
102. "Honda Gold Wing Timeline". News & Views. American Honda Motor Co. 21 February 2011. Retrieved 8 November 2013.
103. "2012 Honda Gold Wing First Look". Motorcycle USA. 21 February 2011. Archived from the original on 3 December 2013. Retrieved 23 November 2013. Unchanged is the familiar 1832cc Flat Six powering the Honda. The Wing also remains a heavyweight touring platform, tipping the scales at a staggering 903–944 pounds, depending on the options. Thankfully, the electric Reverse system remains a standard feature. Also standard fare on the base Gold Wing are five-position heated grips, seat and backrest. Honda's combined braking system is standard as well, with ABS optional.
104. "2020 HONDA GL1800 GOLD WING".
105. Gales, Morgan (March–April 2018), "2018 HONDA GOLD WING", Motorcyclist , p. 42
106. "How Different Can Three Gold Wings Be? More Than You Can Ever Imagine!". Motorcyclist . 28 October 2017. Retrieved 10 March 2018.
107. The DuoLever was derived from a 1980s design by Norman Hossack
108. "Honda Announces 2018 Gold Wing". 25 October 2017.
109. Coldwells, Arthur (24 October 2017). "2018 Honda Gold Wing First Look". Ultimate Motorcycling. Retrieved 11 December 2017.
110. "Honda Announces Android Auto Integration for Gold Wing Series". 13 May 2020.
111. "Honda Improves Touring Comfort, Convenience with 2021 Gold Wing". 5 January 2021.
112. "Revealed: Gold Wing F6C". Visordown. Immediate Media Co. 20 November 2013. Retrieved 20 November 2013.
113. Ets-Hokin, Gabe (20 November 2013). "2014 Honda Valkyrie Announced!". Motorcycle Daily. Retrieved 1 December 2013.
114. "Honda Launches 2014 Honda Valkyrie". Bikeland.org. Bikeland Media. 20 November 2013. Retrieved 20 November 2013.
115. Cook, Marc (19 November 2013). "2014 Honda Valkyrie First Look". Motorcyclist Online. Source Interlink Media. Retrieved 20 November 2013.
116. Wilson, Andrea (20 November 2013). "2014 Honda Valkyrie First Look". Cycle News. Archived from the original on 25 November 2013. Retrieved 20 November 2013.
117. "Honda Gold Wing F6B Review - YouMotorcycle". 4 June 2015.
118. "Gunmax - The Brave Police J-Decker" (in Japanese). 1 June 2023.

References

• Birkitt, Malcolm (1995). Honda gold wing. London: Osprey Automotive. ISBN   9781855324435.
• Birkitt, Malcolm (1999). Honda Goldwing & Valkyrie. Oxford: Osprey. ISBN   9781855328792.
• Falloon, Ian (2001). Honda Gold Wing. Sparkford Newbury Park, Calif: Haynes Pub. Haynes North America. ISBN   9781859606605.
• Holmstrom, Darwin (2000). Honda gold wing. North Conway, N.H: Whitehorse Press. ISBN   9781884313226.
• Rau, Fred (2010). Motorcycle touring bible. St. Paul, Minn: Motorbooks. ISBN   9780760337417.
• Scotto, Emilio (2007). The longest ride : my ten-year, 500,000 mile motorcycle journey. St. Paul: MBI Pub. Co. Motorbooks. ISBN   9780760326329.
• Vreeke, Ken (1994). Gold Wing : the first 20 years : twentieth anniversary. Torrance, CA: American Honda Motor Co., Inc. ISBN   0964249103.
• West, Phil (2003). Honda Gold Wing : the complete story. Ramsbury: Crowood. ISBN   9781861265845.
• Wright, Ron (2011). Clymer Honda GL1800 Gold Wing, 2001-2010. Overland Park, Kan: Clymer. ISBN   9781599693873.
• Darlington, Mansur (1983). Honda GL1000 Gold Wing owners workshop manual. Yeovil: Haynes. ISBN   9780856967108.
• Rogers, Chris (1981). Honda GL1100 Gold Wing owners workshop manual. Yovil, Somerset, England Newbury Park, Calif: Haynes Pub. Group Distributed in the USA by Haynes Publications. ISBN   9780856966699.
• Ahlstrand, Alan (1997). Honda GL1200 Gold Wing owners workshop manual. Sparkford Nr Yeovil, Somerset, Eng. Newbury Park, Calif: Haynes Pub. Haynes North America. ISBN   9781563921995.
• Ahlstrand, Alan (2000). Honda GL1500 Gold Wing owners workshop manual . Sparkford Nr Yeovil, Somerset, Eng. Newbury Park, Calif: Haynes Pub. Haynes North America. ISBN   9781563924064.
• Ahlstrand, Alan (2012). Honda GL1800 Gold Wing : service and repair manual. Newbury Park, Calif. Sparkford: Haynes. ISBN   9781563929731.

External links

• Motorcycle airbag system in Honda's motorcycle technology picturebook (requires Adobe Flash)