Hydraulic engine house, Bristol Harbour

Last updated

Hydraulic engine house
Hydraulicpumpingstation.jpg
Bristol UK location map.svg
Red pog.svg
Location within Bristol
General information
Town or city Bristol
Country England
Coordinates 51°26′49″N2°37′06″W / 51.4469°N 2.6183°W / 51.4469; -2.6183 Coordinates: 51°26′49″N2°37′06″W / 51.4469°N 2.6183°W / 51.4469; -2.6183
Completed1888

The Hydraulic engine house is part of the "Underfall Yard" in Bristol Harbour in Bristol, England.

The octagonal brick and terracotta chimney of the engine house dates from 1888, and is grade II* listed, [1] as is the hydraulic engine house itself. [2] It replaced the original pumping house which is now The Pump House public house. It is built of red brick with a slate roof and originally contained two steam engines made by the Worthington Corporation. These were compound surface condensing cylinders of 17.5 inches (440 mm) diameter. [3] These were replaced in 1907 by the current machines from Fullerton, Hodgart and Barclay of Paisley. It powered the docks' hydraulic system of cranes, bridges and locks [4] until 2010.

Water is pumped from the harbour to a header tank and then fed by gravity to the high pressure pumps, where it is pressurised thence raising the external hydraulic accumulator. This stores the hydraulic energy ensuring a smooth delivery of pressure and meaning that the pumps do not need to be running the whole time nor be capable of supplying the instantaneous peak demands. The working pressure is 750 lbs/square inch. The external accumulator was added about 1954 when the original inside the building's tower became difficult to service (but it remains in place). The building originally contained a pair of steam powered pumps [5] however these were replaced with three electrically driven ones in 1907. [6] The engine house provided the power for equipment such as the lock gates and cranes until 2010. [7]

The visitor centre in the hydraulic power house opened in time for Easter 2016. [8]

See also

Related Research Articles

A hydraulic accumulator is a pressure storage reservoir in which an incompressible hydraulic fluid is held under pressure that is applied by an external source of mechanical energy. The external source can be an engine, a spring, a raised weight, or a compressed gas. An accumulator enables a hydraulic system to cope with extremes of demand using a less powerful pump, to respond more quickly to a temporary demand, and to smooth out pulsations. It is a type of energy storage device.

The London Hydraulic Power Company was established in 1883 to install a hydraulic power network in London. This expanded to cover most of central London at its peak, before being replaced by electricity, with the final pump house closing in 1977.

Bristol Harbour Harbour in Bristol, England

Bristol Harbour is the harbour in the city of Bristol, England. The harbour covers an area of 70 acres. It is the former natural tidal river Avon through the city but was made into its current form in 1809 when the tide was prevented from going out permanently. A tidal by-pass was dug for 2 miles through the fields of Bedminster for the river, known as the "River Avon New Cut", "New Cut", or simply "The Cut". It is often called the Floating Harbour as the water level remains constant and it is not affected by the state of the tide on the river in the Avon Gorge, The New Cut or the natural river southeast of Temple Meads to its source.

Crofton Pumping Station Grade I listed pumping station in Great Bedwyn, United Kingdom

Crofton Pumping Station, near the village of Great Bedwyn in Wiltshire, England, supplies the summit pound of the Kennet and Avon Canal with water.

Grimsby Dock Tower

Grimsby Dock Tower is a hydraulic accumulator tower and a maritime landmark at the entrance to the Royal Dock, Grimsby, in North East Lincolnshire, England. It was completed on 27 March 1852, based on William Armstrong's idea of the hydraulic accumulator, with the purpose of containing a 30,000-imperial-gallon (140,000 L) reservoir at a height of 200 feet (61 m), that was used to provide hydraulic power to power the machinery of the Grimsby Docks. The extreme height of the tower was necessary to achieve sufficient pressure, and as a result of this, the tower can be seen for several miles around, even far inland on the north bank of the River Humber in villages such as Patrington.

Wapping Hydraulic Power Station

The Wapping Hydraulic Power Station was originally run by the London Hydraulic Power Company in Wapping, London, England. Originally, it operated using steam, and was later converted to use electricity. It was used to power machinery, including lifts, across London. The Tower Subway was used to transfer the power, and steam, to districts south of the river.

Hydraulic power network

A hydraulic power network is a system of interconnected pipes carrying pressurized liquid used to transmit mechanical power from a power source, like a pump, to hydraulic equipment like lifts or motors. The system is analogous to an electrical grid transmitting power from a generating station to end-users. Only a few hydraulic power transmission networks are still in use; modern hydraulic equipment has a pump built into the machine. In the late 19th century, a hydraulic network might have been used in a factory, with a central steam engine or water turbine driving a pump and a system of high-pressure pipes transmitting power to various machines.

London Museum of Water & Steam

London Museum of Water & Steam is an independent museum founded in 1975 as the Kew Bridge Steam Museum. It was rebranded in early 2014 following a major investment project.

Cumberland Basin (Bristol) Place in Bristol, England

The Cumberland Basin is the main entrance to the docks of the city of Bristol, England. It separates the areas of Hotwells from the tip of Spike Island.

Pump House, Bristol

The Pump House is an historic pub in Hotwells on Bristol Harbour, Bristol, England. It is a grade II listed building.

Underfall Yard Boatyard in Bristol with mechanism for maintaining water and silt levels in the harbour

The Underfall Yard is a historic boatyard on Spike Island serving Bristol Harbour in England.

Fairbairn steam crane

A Fairbairn crane is a type of crane of an 'improved design', patented in 1850 by Sir William Fairbairn. There are numerous hand-powered versions around the world and one surviving steam-powered example in Bristol Docks, England.

An engine house is a building or other structure that holds one or more engines. It is often practical to bring engines together for common maintenance, as when train locomotives are brought together.

Manchester Hydraulic Power

Manchester's Hydraulic Power system was a public hydraulic power network supplying energy across the city of Manchester via a system of high-pressure water pipes from three pumping stations from 1894 until 1972. The system, which provided a cleaner and more compact alternative to steam engines, was used to power workshop machinery, lifts, cranes and a large number of cotton baling presses in warehouses as it was particularly useful for processes that required intermittent power. It was used to wind Manchester Town Hall clock, pump the organ at Manchester Cathedral and raise the safety curtain at Manchester Opera House in Quay Street. A large number of the lifts and baling presses that used the system had hydraulic packings manufactured by John Talent and Co.Ltd. who had a factory at Ashworth Street, just off the Bury New Rd. close to the Salford boundary.

Gloucester Waterways Museum

Gloucester Waterways Museum is housed in a Victorian warehouse at Gloucester Docks in the city of Gloucester, England. It is located along the Gloucester and Sharpness Canal and River Severn.

Prince Street Bridge

Prince Street Bridge is a swing bridge across Bristol Harbour. It is now Grade II listed. The bridge carries a road from Prince Street to Wapping Road and is located between the Arnolfini art centre and M Shed museum.

Carrington Pump House

Carrington Pump House is a heritage-listed former hydraulic power station at 106 Bourke Street, Carrington, City of Newcastle, New South Wales, Australia. It was built from 1877 to 1878 by William H. Jennings. It is also known as Hydraulic Engine House and Crane Bases Nos. 7, 8, 9 and 10 and Carrington Hydraulic Power Station. It was added to the New South Wales State Heritage Register on 25 August 2017.

Cockatoo Island Power House & Pump House

Power House & Pump House is a heritage-listed power house and pumping station at Cockatoo Island, Sydney Harbour, New South Wales, Australia. It was added to the Australian Commonwealth Heritage List on 22 June 2004.

Hydraulic Pump Station

The Hydraulic Pump Station is a heritage-listed former hydraulic power station and now bar at 17 Little Pier Street, Haymarket, City of Sydney, New South Wales, Australia. It was built from 1889 to 1891. It was added to the New South Wales State Heritage Register on 2 April 1999.

References

  1. Historic England. "Chimney of hydraulic engine house (1218654)". National Heritage List for England . Retrieved 18 August 2006.
  2. Historic England. "Hydraulic engine house (1202648)". National Heritage List for England . Retrieved 8 August 2016.
  3. Rogers, Bertram M.H. (2014). Handbook to Bristol and the Neighbourhood with Map (in Excursion Pamphlets). Butterworth-Heinemann. ISBN   9781483223094.
  4. Historic England. "Hydraulic engine house (1202648)". National Heritage List for England . Retrieved 18 August 2006.
  5. Wallis,G,UNDERFALL YARD SURVEY of HISTORIC MACHINERY,http://www.gwconservation.com/page5.htm
  6. McNeill, Jeremy (1997). Bristol's Harbourside: A Guide to the City Docks. Hotwell. p. 39. ISBN   978-0953027002.
  7. "Bristol City Docks (post 1830s)". Engineerung Timelines. Retrieved 9 November 2017.
  8. http://www.underfallyard.co.uk/