IBM 1750, 2750 and 3750 Switching Systems

Last updated

The IBM 1750, 2750 and 3750 Switching Systems were telephone exchange systems produced by IBM from the 1960s to the 1990s.

Contents

IBM engineers in the IBM La Gaude Research Laboratory, north-west of Nice in France, developed an electronic Private Automatic Branch Exchange: the first stored-program-controlled PABX to be marketed and installed in the world. The product family handled up to 2516 extensions and 356 trunk lines. They were among those very few IBM products to be still in use in five European countries for some 40 years following the 1969 market introduction of the IBM 2750 Switching System.

Before 1969 only electromechanical Strowger and Crossbar PABXs were available. [1]

The family of IBM 1750, 2750 and 3750 Switching Systems was developed from the IBM 1800. Each system included twin stored-program controllers (each with 32K or 64K main storage}; some 600,000 lines of code; emergency and every-night automatic switchover; twin disks (none for the 2750); and solid-state switching. Extension, trunk and tie lines were connected by discrete transistors on plug-in panels. All systems were assembled in IBM's French Montpellier factory for France, Germany, Italy, and the UK.

Early development

The French engineers in IBM La Gaude in the late 1960s developed a prototype system based on the IBM 1130 to handle 500 telephone extensions and some 20 trunk lines to the local telephone exchange.

They then developed the marketable IBM 2750 Switching System, code named Carnation, with IBM 1800 computers – two 1800s for fail-safe redundancy – each with 32K or later 64K of magnetic-core memory, and IBM Solid Logic Technology (SLT), but no disks (disk storage was new and very expensive then). Maximising reliability, each central processing unit had its own transistorised switching network with crosspoint switching.

The 2750 was greatly influenced by the European national telephone authorities (PTTs) who insisted on isolating-line transformers to protect their engineers. The 2750 had large 40cm-by-30cm plug-in extension packs each handling only four telephone extensions with standard PTT 50-volt telephones. The Assembler-language program was loaded using punched paper tape, needing some 90 minutes for each of the two CPUs. Smaller maintenance programs could be loaded into unprotected storage. Fault finding was limited to 4K programs and needed an oscilloscope — but the 2750 was reliable enough to run 24/7.

An attached IBM Selectric typewriter let customers change system facilities such as the extension numbers of telephones of repositioned staff. The 2750 was very quiet as it was transistorised with no moving parts other than the cooling fans in the cabinets, compared with the noisy, electro-mechanical Strowger PABX systems then everywhere across Europe.

Countries, costs, installations, 1968 to 2010

The 1968-available 2750 was sold in France, Germany, Italy, and Belgium; 3750s (from 1970) and 1750s (from 1979) were sold in these four countries and the United Kingdom. In the UK a 2750 was installed in the IBM Wigmore Street, London office; another was in IBM's plant in Havant, Hampshire: this was used for demonstrations and by the employees at the plant. The Netherlands installed some in IBM sites. Costs ranged from $150,000 to $600,000, plus up to $60,000 for the 3750's large room, air conditioning, and false flooring because of the extensive cabling between the three 3750 cabinets. By the time the 1750 was withdrawn from sales in 1988, there were some 300 systems installed in Europe. 1750s and 3750s were still in use in the year 2010 -- some of the longest-life IBM products.

Functions new to markets

In the 1970s a 3750 toured Europe in three French lorries: a demonstration-suite lorry, a system lorry, and a generator lorry. Here potential customers flocked over several days to St Katherine's Pier near the Tower Bridge in London. The people shown were the three French lorry drivers and five IBM UK staff. IBM 3750 Switching System mobile demonstration London 1970s.jpg
In the 1970s a 3750 toured Europe in three French lorries: a demonstration-suite lorry, a system lorry, and a generator lorry. Here potential customers flocked over several days to St Katherine's Pier near the Tower Bridge in London. The people shown were the three French lorry drivers and five IBM UK staff.
Interior of the 1970s lorry-based 3750 demonstration suite that was driven throughout France, Germany, Italy and the UK. Note the use of a slide projector and the then novelty of push-button telephones. IBM 3750 Switching System French lorry-based demonstration suite 1970s.jpeg
Interior of the 1970s lorry-based 3750 demonstration suite that was driven throughout France, Germany, Italy and the UK. Note the use of a slide projector and the then novelty of push-button telephones.

Long-distance and particularly international telephone calls were still very expensive in the 1970s. Although the 3750 when first marketed in 1970 cost almost double the equivalent-sized non-stored-program machines, the business case was compelling because the number of telephone operators could be halved, and for the first time organisations could determine what calls were made, where they were made to, and who made them. Suddenly the phone bill, instead of being a single item, could be allocated to departments and individuals, with details of called numbers and duration. However, systems were mostly ordered because of the first-time use of touch-tone telephones, call re-routing, short-code dialling etc (see below) — all functions taken for granted today.

UK sales

In the UK, the first 3750 customer was British Caledonian Airways, quickly followed by Bland Payne Insurance Brokers, Derbyshire County Council and Geest Bananas. Later many household names installed 3750, such as Great Universal Stores, Grosvenor House Hotel, Rowntree Mackintosh, Selfridges, Kwik Save, American Express, Mobil (a network including 1750s on North Sea oil and gas platforms), Unigate (dairies), Royal Bank of Scotland, Reckitt & Colman, Tesco, CWS (Co-operative Wholesale Society), and Greater Manchester Police (GMP) — GMP installed a 3750 at their headquarters Chester House, and later a network of 1750s around the Greater Manchester area. [2]

Systems

SystemYears marketedYears installedExtensionsTrunks + tie linesOperator desksMain storage in each of the two controllers
IBM 2750 Switching System1968 to 19701968 to late 1970s?100-500?up to 20?up to 4?32K and later 64K
IBM 3750 Switching System1970 to 1990s1970 to about 2010?248 - 251632 - 3562 - 1864K
IBM 1750 Switching System1979 to 1990s1979 to about 2010100 - 7600 - 961 - 564K

The systems all had both voice and data functions. Early-1970s computers had hardly any typewriter-like terminals and certainly no screens – the IBM Switching Systems introduced the novelty of simple digital-data capture from every touch-tone telephone extension. But customers largely bought the systems for their then-new voice and management facilities.

The systems needed secure electricity night and day (2 to 15 kilowatts).

Extension facilities

Facilities for the extensions were revolutionary at the time and particularly valued by organisations in financial and other industries with relatively highly-paid office-based employees:

Management facilities

Centralised IBM 3755 Operator Desks could handle calls for multiple 3750s and 1750s dispersed across a country. They were originally developed at IBM La Gaude. IBM 3755 Operator Desk.jpg
Centralised IBM 3755 Operator Desks could handle calls for multiple 3750s and 1750s dispersed across a country. They were originally developed at IBM La Gaude.

Most management facilities were new to the PABX market:

Data facilities

The then-novel data facilities included:

IBM’s customers for instance used the data functions for staff to report chargeable activity from their telephones.

Later additional facilities

Over time IBM introduced further functions:

Networking

Widespread networks of systems became an important market for IBM. These multiple interconnected systems had central operating and control functions, tie-line busy back-up or rerouting via the public network, traffic saturation control, tie-line access restriction, network numbering up to 7 digits, remote paging, camping-on a remote extension, and adding a third party remotely.

Follow-on products

By about 1984 IBM could see that there would be few sales by about 1986 of the dated-technology 1750 and 3750 and that IBM's French development centre in La Gaude was not successfully developing a replacement product. So in 1984, IBM bought the American company ROLM that had more than 20,000 PABXs installed in the USA. IBM planned the ROLM system to be marketed in Europe as the IBM 8750, to replace the 1750 and 3750: despite much IBM expenditure, this did not happen, largely because of the difficulty of modifying the ROLM product for European conditions. IBM then unsuccessfully negotiated to sell Siemens PABXs, before stopping marketing all PABXs. IBM continued to maintain 1750s and 3750s, before contracting others to maintain them into the 2000s — these were among those few IBM products to be still in use for nearly 40 years after their market introduction.

IBM 8750

IBM bought land in Wootton Bassett just west of Swindon in England to build a ROLM factory for Europe — the land was not used. In 1987 IBM started to market the ROLM-derived IBM 8750 Business Communications System in Austria, Belgium, France, Germany, Italy, Luxemburg, and the UK. Principally for homologation, a few had been installed in IBM locations, such as IBM Havant and IBM Portsmouth in England – however none were installed in customer locations. [3]

The 8750 had from 91 to 3000 telephone extensions; up to 1000 simultaneous conversations; a computer based on a Motorola 68020; up to 16 IBM 8755 Operator Consoles; a 30MB fixed disk; main/satellite working with 3750s and 1750s; digital trunks in Belgium, Italy and the UK; and used ISDN and Systems Network Architecture (SNA) networks. [4]

Related Research Articles

<span class="mw-page-title-main">Telephone switchboard</span> Device used to connect telephone circuits to establish calls between users

A telephone switchboard is a device used to connect circuits of telephones to establish telephone calls between users or other switchboards. The switchboard is an essential component of a manual telephone exchange, and is operated by switchboard operators who use electrical cords or switches to establish the connections.

Direct distance dialing (DDD) is a telecommunications service feature in North America by which a caller may, without operator assistance, call any other user outside the local calling area. Direct dialing by subscribers typically requires extra digits to be dialed as prefixes to the directory telephone number of the destination. International Direct Distance Dialing (IDDD) extends the system beyond the geographic boundaries of the North American Numbering Plan (NANP).

In computing, a plug and play (PnP) device or computer bus is one with a specification that facilitates the recognition of a hardware component in a system without the need for physical device configuration or user intervention in resolving resource conflicts. The term "plug and play" has since been expanded to a wide variety of applications to which the same lack of user setup applies.

Interactive voice response (IVR) is a technology that allows telephone users to interact with a computer-operated telephone system through the use of voice and DTMF tones input with a keypad. In telephony, IVR allows customers to interact with a company's host system via a telephone keypad or by speech recognition, after which services can be inquired about through the IVR dialogue. IVR systems can respond with pre-recorded or dynamically generated audio to further direct users on how to proceed. IVR systems deployed in the network are sized to handle large call volumes and also used for outbound calling as IVR systems are more intelligent than many predictive dialer systems.

<span class="mw-page-title-main">Strowger switch</span> Electromechanical telephone switch

The Strowger switch is the first commercially successful electromechanical stepping switch telephone exchange system. It was developed by the Strowger Automatic Telephone Exchange Company founded in 1891 by Almon Brown Strowger. Because of its operational characteristics, it is also known as a step-by-step (SXS) switch.

A voicemail system is a computer-based system that allows callers to leave a recorded message when the recipient has been unable or unwilling to answer the phone. Calls may be diverted to voicemail manually or automatically. The caller is prompted to leave a message and the recipient can retrieve the message at a later time.

<span class="mw-page-title-main">IBM 1800 Data Acquisition and Control System</span> Process control variant of the IBM 1130 minicomputer

The IBM 1800 Data Acquisition and Control System (DACS) was a process control variant of the IBM 1130 with two extra instructions, extra I/O capabilities, 'selector channel like' cycle-stealing capability and three hardware index registers.

System X is the digital switching system installed in almost all telephone exchanges throughout the United Kingdom, from 1980 onwards.

In telephony, an automated attendant allows callers to be automatically transferred to an extension without the intervention of an operator/receptionist. Many AAs will also offer a simple menu system. An auto attendant may also allow a caller to reach a live operator by dialing a number, usually "0". Typically the auto attendant is included in a business's phone system such as a PBX, but some services allow businesses to use an AA without such a system. Modern AA services can route calls to mobile phones, VoIP virtual phones, other AAs/IVRs, or other locations using traditional land-line phones or voice message machines.

<span class="mw-page-title-main">Business telephone system</span> Telephone system typically used in business environments

A business telephone system is a telephone system typically used in business environments, encompassing the range of technology from the key telephone system (KTS) to the private branch exchange (PBX).

<span class="mw-page-title-main">Hook flash</span> Telephone signal

On analog telephone lines with special services, a flash or register-recall signal is used to control functions on the public telephone exchange, PBX or VoIP ATA.

Telenet was an American commercial packet-switched network which went into service in 1975. It was the first FCC-licensed public data network in the United States. Various commercial and government interests paid monthly fees for dedicated lines connecting their computers and local networks to this backbone network. Free public dialup access to Telenet, for those who wished to access these systems, was provided in hundreds of cities throughout the United States.

Siemens Communications was the communications and information business arm of German industrial conglomerate Siemens AG, until 2006. It was the largest division of Siemens, and had two business units – Mobile Networks and Fixed Networks; and Enterprise.

<span class="mw-page-title-main">ROLM</span> Defunct American computer and telecommunications manufacturer

ROLM Corporation was a technology company founded in Silicon Valley in 1969. IBM Corp. partnered with the company, and ROLM Mil-Spec was sold to Loral Corporation and later to Lockheed Martin in 1996 as Tactical Defense Systems. IBM's ROLM division was later half sold to Siemens AG in 1989, whereupon the manufacturing and development became wholly owned by Siemens and called ROLM Systems, while marketing and service became a joint venture of IBM with Siemens, called ROLM Company. After nearly 30 years, phone products with the name "Rolm" were discontinued in the late 1990s, as sales dropped in markets dominated by new technology with other products or other companies.

Stored program control (SPC) is a telecommunications technology for telephone exchanges. Its characteristic is that the switching system is controlled by a computer program stored in a memory in the switching system. SPC was the enabling technology of electronic switching systems (ESS) developed in the Bell System in the 1950s, and may be considered the third generation of switching technology. Stored program control was invented in 1954 by Bell Labs scientist Erna Schneider Hoover, who reasoned that computer software could control the connection of telephone calls.

The No. 4 Electronic Switching System (4ESS) is a class 4 telephone electronic switching system that was the first digital electronic toll switch introduced by Western Electric for long-distance switching. It was introduced in Chicago in January 1976, to replace the 4A crossbar switch. The last of the 145 systems in the AT&T network was installed in 1999 in Atlanta. Approximately half of the switches were manufactured in Lisle, Illinois, and the other half in Oklahoma City, Oklahoma. At the time of the Bell System divestiture, most of the 4ESS switches became assets of AT&T as part of the long-distance network, while others remained in the RBOC networks. Over 140 4ESS switches remained in service in the United States in 2007.

<span class="mw-page-title-main">Telephone exchange</span> Interconnects telephones for calls

A telephone exchange, also known as a telephone switch or central office, is a crucial component in the public switched telephone network (PSTN) or large enterprise telecommunications systems. It facilitates the interconnection of telephone subscriber lines or digital system virtual circuits, enabling telephone calls between subscribers.

<span class="mw-page-title-main">IBM La Gaude</span> Former computer research lab in France

The IBM La Gaude Study and Research Centre was a computer research laboratory for IBM in La Gaude, just west of Nice on the Côte d'Azur on France's southeastern coast. In the 1990s, it became a presentation centre for IBM Business Solutions. IBM left the site for the city of Nice in 2015.

The IBM 8750 Business Communications System was a voice and data switching system PABX, suitable for medium to large numbers of extensions, used on customer premises." The 8750 was the European version of the IBM 9751, also a ROLM design.

<span class="mw-page-title-main">IBM Audio Response Units</span> Early interactive voice response units developed by IBM

The IBM 7770 and IBM 7772 Audio Response Units are an early form of interactive voice response (IVR) technology. They allowed users to interact directly with an IBM Mainframe using only a touch-tone telephone or a terminal which could generate tones. They are notable for being part of a number of first of a kind IT solutions and also for enabling what is described as the "world's first talking computer".

References

  1. IBM 1750 Switching System – system overview IBM UK brochure GK10-6264-2 and IBM Germany brochure Vermittlungssystem IBM 1750 Systemüberblick GA12-12-2437-1
  2. IBM's Talking Lines magazines
  3. "History of ROLM, IBM, and Siemens Enterprise Communications".
  4. IBM brochure G511-1025-0 dated 10/1987; System description GA19-5480 and 20 other manuals