IMAM Ro.63

Ro.63
Role	Reconnaissance
Manufacturer	Industrie Meccaniche e Aeronautiche Meridionali (IMAM)
Designer	Giovanni Galasso
First flight	June 1940
Primary user	Regia Aeronautica
Number built	6

Last updated January 31, 2023

The IMAM Ro.63 was an Italian STOL aircraft designed for short-range reconnaissance and light transport during World War II.

Development and design

Interest in a STOL aircraft was raised by the Fieseler Fi 156 Storch acquired from Germany, and in June 1939 the Regia Aeronautica asked Italian aircraft companies to design a similar machine (see below).

The IMAM Ro.63 was of mixed construction with wood, fabric and metal used for the fuselage and wings. It first flew in June 1940, just at the outbreak of World War II. It was put into competition with another Italian aircraft, but clearly proved superior.

It had STOL capabilities similar to the Fi.156, but the larger fuselage held up to four people, and the wings held more fuel. The 190 kW (250 hp) Hirth HM 508 engine and constant speed propeller helped to give it a maximum speed of 240 km/h (149 mph) and almost 1,000 km (621 mi) range. However, there was no defensive armament, as the Fi 156 had from the C version onwards.

The aircraft, designed by Giovanni Galasso, and tested by Aldo Ligabò, could have been a success, but although 150 were ordered, only six were produced from mid-1940 to 1941, due of the shortage of available engines, the Italian engine industry having failed to produce enough suitable Isotta Fraschini Beta engines.

The Ro.63 was a viable machine that was not put into production in significant numbers (practically only a pre-series production) despite the fact that development was completed pre-war. They were doomed by lack of Italian-built engines. The performance was better than the Fi 156, with a superior speed and endurance, and only slightly inferior STOL capabilities. This was due to the more powerful engine and the two-speed propeller.

Operational service

The aircraft was deployed in the North African Campaign, together with 30 Fieseler Fi 156 imported from Germany, even though this was insufficient to replace the IMAM Ro.37 and older reconnaissance aircraft. By 1943, after two years hard service, only one Ro.63 survived. In 1948 it was proposed to resume production, but lack of capacity and data about the aircraft meant that the project was eventually abandoned.

Other STOL aircraft

Other STOL aircraft in the same competition as the Ro.63 included the AVIS C.4 and Caproni GDL. The Avis C.4 had a good performance but suffered from poor flying characteristics. ^{[ citation needed ]} The Caproni GDL, was not completed.^{[ citation needed ]}

Operators

Kingdom of Italy

Regia Aeronautica

Specifications (Ro.63)

Data fromItalian Civil and Military aircraft 1930–1945^[1]

General characteristics

Crew: 1
Capacity: 1–2
Length: 9.60 m (31 ft 6 in)
Wingspan:13.500 m (44 ft 3+1⁄2 in)
Height:2.354 m (7 ft 8+2⁄3 in)
Gross weight: 1,058 kg (2,332 lb)
Max takeoff weight: 1,482 kg (3,267 lb)
Powerplant: 1 × Hirth HM 508D inverted V-8 air-cooled piston engine, 190 kW (250 hp)

Performance

Maximum speed: 203 km/h (126 mph, 109 kn)
Range: 900 km (560 mi, 490 nmi)

Related Research Articles

The Messerschmitt Bf 163 was an STOL aircraft designed by BFW and built by Weserflug before World War II.

The Caproni Ca.314 was an Italian twin-engine attack/torpedo bomber aircraft, used in World War II.

The Meridionali Ro.37 Lince was a two-seater Italian reconnaissance biplane, a product of the Industrie Meccaniche Aeronautiche Meridionali (IMAM) company. It appeared in 1934 and had a composite structure of wood and metal. The aeroplane first saw operational duty in the Second Italo-Ethiopian War (1935–1936) and Spanish Civil War (1936–1939), and during the Second World War it saw duty on almost all fronts, except for Russia and the English Channel. It followed the Ro.1 as the main reconnaissance aircraft for the Italian Army.

The Caproni PS.1, also known as the Pallavicino PS-1 and Caproni Ca.303, was an Italian four-seater sportsplane, designed and built specifically to compete in Challenge 1934, the European touring plane championships.

The Caproni Ca.309 Ghibli was an Italian aircraft used in World War II. Its nickname 'Ghibli' refers to a desert wind that later served as the inspiration for animation Studio Ghibli's name.

The Caproni Ca.100 was the standard trainer aircraft of the Regia Aeronautica in the 1930s. Large numbers of this tandem, two-seat, biplane were built, powered by different engines.

<span class="mw-page-title-main">Caproni Vizzola F.5</span> Italian fighter

The Caproni Vizzola F.5 was an Italian fighter aircraft that was built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.

The Piaggio P.32 was an Italian medium bomber of the late 1930s, produced by Piaggio, and designed by Giovanni Pegna. It was a modern design for its time, but was a failure due to lack of powerplants commensurate with its high wing loading.

The IMAM Ro.51 was an Italian fighter aircraft that first flew in 1937. It was designed for the 1936 new fighter contest for the Regia Aeronautica, with practically all the Italian aircraft builders involved.

The Caproni Ca.308 Borea was a small airliner built in Italy in the mid-1930s.

The Fieseler Fi 97 was a 1930s German four-seat cabin touring and competition monoplane aircraft designed and built by the German manufacturer Fieseler.

The Klemm Kl 36 is a 1930s German four-seat cabin touring and competition monoplane. It was designed by Klemm and Friedrich Fechner and built by Klemm.

The Stipa-Caproni, also known as the Caproni Stipa, was an experimental Italian aircraft designed in 1932 by Luigi Stipa (1900–1992) and built by Caproni. It featured a hollow, barrel-shaped fuselage with the engine and propeller completely enclosed by the fuselage—in essence, the whole fuselage was a single ducted fan. Although the Regia Aeronautica was not interested in pursuing development of the Stipa-Caproni, its design influenced the development of jet propulsion.

The Caproni Vizzola F.4 was an Italian fighter aircraft prototype that was designed in 1937 and built from 1939. It was a single-seat, low-wing cantilever monoplane with retractable landing gear.

The Caproni Vizzola F.6 was a World War II-era Italian fighter aircraft built by Caproni. It was a single-seat, low-wing cantilever monoplane with retractable landing gear. Only two prototypes were built, one designated F.6M and the other designated F.6Z.

The Caproni Ca.331 Raffica was an Italian aircraft built by Caproni in the early 1940s as a tactical reconnaissance aircraft/light bomber and also as a night fighter.

The Caproni Ca.350 was an Italian single-engined project for a two-seat fighter-bomber/reconnaissance aircraft of the 1930s. Designed by Cesare Pallavicino to meet a requirement of the Regia Aeronautica, it was an innovative and fast design, to have been powered by an Isotta Fraschini Zeta R.C.42, but no aircraft were built.

The AVIS C.4 was a 1940s Italian liaison aircraft designed by Ugo Abate and built by Avio Industrie Stabiensi (AVIS) for an Italian Air Force requirement for a liaison aircraft with a similar role to the Fieseler Fi 156.

The Piaggio P.IX, or Piaggio Stella P.IX, was an Italian nine-cylinder radial aircraft engine produced by Rinaldo Piaggio S.p.A. Based on the Gnome-Rhône 9K, the engine was rated at 600 hp (447 kW). Production was used to power a number of other aircraft developed in Italy. The main users were the Savoia-Marchetti SM.81 transport and the IMAM Ro.37bis, the main reconnaissance aircraft in the Regia Aeronautica during the Second Italo-Ethiopian War, Spanish Civil War and Second World War, but the engine was also used by other designs, including the prototype Savoia-Marchetti SM.79.

References

Lembo, Daniele Officine Meccaniche Meridionali, Aerei nella storia magazione, Delta editions, Parma, Oct–Nov 2003 (in Italian)
enricopezzi.it (in Italian)
Thompson, Jonathan W. (1963). Italian Civil and Military aircraft 1930–1945 (1st ed.). New York: Aero Publishers Inc. ISBN 0-8168-6500-0.

Notes

↑ Thompson, Jonathan W. (1963). Italian Civil and Military aircraft 1930–1945 (1st ed.). New York: Aero Publishers Inc. ISBN 0-8168-6500-0.

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[Thompson-1] Thompson, Jonathan W. (1963). Italian Civil and Military aircraft 1930–1945 (1st ed.). New York: Aero Publishers Inc. ISBN 0-8168-6500-0.

[1]