INA Model 953 | |
---|---|
Type | Sub machine gun |
Place of origin | Brazil |
Service history | |
In service | 1950 - late 1980s? |
Wars | Suez Crisis Araguaia Guerrilla War [1] |
Production history | |
Designer | Dansk Industri Syndikat |
Designed | 1950 |
Manufacturer | Indústria Nacional de Armas |
Variants | M.B.-50 |
Specifications | |
Mass | 7.50 Pounds (3.4 kg) |
Length | 31.26" with stock open |
Caliber | .45 ACP |
Action | Blowback-operated, Open bolt |
Rate of fire | 650 rpm |
Muzzle velocity | 740 ft/s |
Effective firing range | 100 m |
Feed system | 30-round detachable box magazine |
Sights | Single aperature set for 100 m |
This article needs additional citations for verification .(January 2024) |
The INA Model 953 is a Brazilian submachine gun, manufacturead and based on the Madsen M/50. [2]
Revolutionary Carlos Marighella recommended this as the "ideal submachine gun for the urban guerrilla" in his "Minimanual of the Urban Guerrilla" [3]
It was manufactured by the Indústria Nacional de Armas in São Paulo Brazil under license for Madsen, which began in 1950. [4]
The first Model was marked M.B.-50 and was manufactured till 1953 and was marked with a large Brazilian crest. In late 1953, the Model 1953 was introduced. Improvements on the 1953 model were a larger magazine housing and a metal loop riveted to the lower right side of the magazine housing. The loop could then hold the magazine housing together. Also the retracting handle was changed on the Model 953 to the right side instead of the top as was the buffer spring and the shape of the extractor, ejector and the firing pin.
The INA Model 53 is made of stamped sheet metal. It's an open bolt design which means it fires when the bolt is in the locked back open position with a fixed firing pin. The firearm is stamped from 2 pieces of sheet metal which are shaped with integral rear pistol grip and magazine housing. The two pieces fit together like a clam shell with the hinge at the rear of the pistol grip. It splits in half right down the middle of the top and bottom of the receiver.
The entire firearm is held together with a barrel locking nut which is threaded onto the fore section of the two receiver halves. The folding stock is made of tubular steel and it folds onto the right side of the firearm.
The Model 953 fires in full auto only and it also has a unique feature, a safety lever in front of the forward magazine housing. To fire the Model 953 you must grip the magazine housing and hold down the safety lever.
The Heckler & Koch MP5 is a submachine gun developed in the 1960s by German firearms manufacturer Heckler & Koch. It uses a similar modular design to the Heckler & Koch G3, and has over 100 variants and clones, including selective fire, semi-automatic, suppressed, compact, pistol-classed, and even marksman variants. The MP5 is one of the most widely used submachine guns in the world, having been adopted by over forty nations and numerous militaries, police forces, intelligence agencies, security organizations, paramilitaries, and non-state actors.
A machine pistol is an autoloading pistol capable of fully automatic fire, including stockless handgun-style submachine guns.
A submachine gun (SMG) is a magazine-fed automatic carbine designed to fire handgun cartridges. The term "submachine gun" was coined by John T. Thompson, the inventor of the Thompson submachine gun, to describe its design concept as an automatic firearm with notably less firepower than a machine gun. As a machine gun must fire rifle cartridges to be classified as such, submachine guns are not considered machine guns.
In firearms terminology, an action is the functional mechanism of a breech-loading firearm that handles the ammunition cartridges, or the method by which that mechanism works. Actions are technically not present on muzzleloaders, as all those are single-shot firearms with a closed off breech with the powder and projectile manually loaded from the muzzle. Instead, the muzzleloader ignition mechanism is referred to as the lock.
The STEN is a British submachine gun chambered in 9×19mm which was used extensively by British and Commonwealth forces throughout World War II and during the Korean War. The Sten paired a simple design with a low production cost, facilitating mass production to meet the demand for submachine guns.
A magazine, often simply called a mag, is an ammunition storage and feeding device for a repeating firearm, either integral within the gun or externally attached. The magazine functions by holding several cartridges within itself and sequentially pushing each one into a position where it may be readily loaded into the barrel chamber by the firearm's moving action. The detachable magazine is sometimes colloquially referred to as a "clip", although this is technically inaccurate since a clip is actually an accessory device used to help load ammunition into a magazine or cylinder.
The Škorpion vz. 61 is a Czechoslovak machine pistol developed in 1959 by Miroslav Rybář (1924–1970) and produced under the official designation Samopal vzor 61 by the Česká zbrojovka arms factory in Uherský Brod from 1963 to 1979. The standard version uses .32 ACP ammunition.
The PM-63 RAK is a Polish 9×18mm submachine gun, designed by Piotr Wilniewczyc in cooperation with Tadeusz Bednarski, Grzegorz Czubak and Marian Wakalski. The RAK combines the characteristics of a self-loading pistol and a fully automatic submachine gun.
The Beretta M12 is a 9×19mm Parabellum caliber submachine gun designed by Beretta. Production started in 1959, the first users were the Italian Carabinieri, Italian State Police and the Guardia di Finanza, though in limited numbers; it was only widely issued beginning in 1978, replacing the old Beretta MAB. In 1962 the Italian Army bought a limited number of Franchi LF-57 submachine guns, judged better than the M12 but never issued to the troops, and only in 1992 the M12S2 variant was introduced, in very limited numbers. The Italian Air Force, instead bought many M12S and M12S2 for the airport security units. However, the weapon had a higher initial success in the Arab countries and South America.
The Spectre M4 is an Italian submachine gun that was produced by the SITES factory in Turin. It was designed by Roberto Teppa and Claudio Gritti in the mid-1980s. Production in Italy ceased in the year 1997, with the closure of SITES, but proceeded in very small numbers in Switzerland through Greco Sport S.A., a company founded by Gritti, until 2001. The Spectre is a compact and light weapon, designed for instant firepower in close combat at short ranges. The four models have top-folding buttstocks, and were available with or without a forward handgrip ahead of the magazine housing. The largely steel Spectre has a polymer overmolded grip, magazine release and safety/selector levers.
The PP-90 is a Russian 9 mm folding submachine gun, developed by the KBP Instrument Design Bureau in Tula for use with special units of the Russian Ministry of Internal Affairs (MVD). It is designed for close quarters combat, particularly engagements that require the weapon to be deployed rapidly in unusual circumstances.
The Mendoza RM2 was a light machine gun similar to the M1918 BAR manufactured in Mexico by Productos Mendoza, S.A. Rafael Mendoza have been producing machine guns for the Mexican Army since 1933 and all have been noted for their lightness, simplicity, ease of maintenance, and economic construction without sacrificing reliability.
The Vigneron is a submachine gun manufactured in Belgium during the 1950s. It used the 9×19mm NATO cartridge and was used by the Belgian Army until the 1980s. The Vigneron is a selective-fire weapon for short-range street and brush fighting. It remains reasonably accurate up to 100 m using sighted semi-automatic fire.
The name Borz is an umbrella term applied to all improvised submachine guns produced during the years of independence of the Chechen Republic of Ichkeria. It was produced in small numbers from 1992 to 1999. The initial model was based on the Armenian K6-92, which in turn was based on the PPS submachine gun.
The Madsen M-50 or M/50 is a submachine gun introduced in 1950. It was produced by the Danish company Dansk Industri Syndikat of Copenhagen, Denmark.
The CPW is a multi-caliber submachine gun developed by ST Kinetics as a PDW-class firearm. The prototype is chambered in 9×19mm Parabellum, but the manufacturer assures that the weapon's modular design allows for a simple caliber conversion to either 5.7×28mm or 4.6×30mm.
The M3 is an American .45-caliber submachine gun adopted by the U.S. Army on 12 December 1942, as the United States Submachine Gun, Cal. .45, M3. The M3 was chambered for the same .45 ACP round fired by the Thompson submachine gun, but was cheaper to mass produce and lighter, at the expense of accuracy. The M3 was commonly referred to as the "Grease Gun" or simply "the Greaser," owing to its visual similarity to the mechanic's tool.
The SR-2 "Veresk" is a Russian submachine gun designed to fire the 9×21mm Gyurza pistol cartridge.
The Demro TAC-1 is a semi-automatic carbine chambered in either .45 ACP or 9×19mm Parabellum. The TAC-1 is the reintroduction of the Fox Carbine to the law enforcement market after a fallout between Gerard J. Fox, the inventor, and Dean Machine Inc. of Manchester, CT. Although it is visually similar to the Thompson submachine gun the operation and design is quite different. The design is a closer cousin to the Soviet PPSh-41.
Indústria Nacional de Armas (INA) was a Brazilian firearms manufacturer.