Mistral | |
---|---|
Mistral-C, airbrakes open for landing | |
Role | Single seat Club Class glider |
National origin | Germany |
Manufacturer | Ingenieur-Büro Strauber - Frommhold Gmbh (ISF) initially, then Mistral-Flugzeugbau and finally Valentin Gmbh |
Designer | Manfred Strauber and Hartmut Frommhold |
First flight | 21 October 1976 |
Number built | 75+ |
The Mistral-C was one of the first gliders, designed in 1974 to the then new Club Class rules. It was based on the Strauber Mistral, a Standard Class glider flown a year earlier, but with a new wing and built from newer composite materials. Both types were designed and constructed in Germany. More than 75 Mistral-Cs were produced.
The immediate precursor of the Mistral-C Club Class glider was the Strauber Mistral high performance Standard Class aircraft designed by Manfred Strauber, Alois Fries, Hartmut Frommhold and Horst Gaber. Design works began in January 1970 and the Mistral made its first flight in July 1975. It was not intended to be serially produced. It was a 15.00 m (49 ft 2.5 in) span shoulder wing monoplane with a T-tail which made much use of glass reinforced plastic (GRP) in its structure. The wings had an area of 9.40 m2 (101.2 sq ft), an aspect ratio of 23.9 and sweepback at one quarter chord of 0.4°. The dihedral was also 0.4°. The airfoil sections used were Wortmann FX-66-S-196 at the root and FX-66-S-161 at the tips. The wings were constructed from GRP/balsa sandwich with ailerons of GRP and rigid, closed cell, polymethacrylimide (PMI) foam. Aluminium Schempp-Hirth airbrakes extended from the upper wing surface only. The tail unit, with an all-moving tailplane, was also formed from PMI filled GRP. The fuselage of the Mistral was a pod and boom monocoque made from GRP/balsa sandwich, with the single seat cockpit under a single piece, framed canopy. Its main, single landing wheel was manually retractable and assisted by a tailskid. The Mistral had a best glide angle of 39:1 and a minimum sink speed of 0.6 m/s (118 ft/mim). [1]
In October 1974 the design of a new model was begun by Strauber and Frommhold, now operating as Ingenieur-Büro Strauber - Frommhold Gmbh. This became the Mistral-C or model 2 Mistral-C and was one of the first gliders to meet the specifications of the then new FAI Club Class. [2] It first flew on 21 October 1976. The main changes were to the wings and, overall, to the construction materials. As detailed in the Specification section below, the wing area was increased, though the span was unchanged, reducing the aspect ratio and consequentially the performance. The new wings had different Wortmann sections, quarter chord forward sweep of 1.0° and dihedral 4.30°. GRP/PVC foam sandwich replaced the earlier balsa sandwich in the wings and the ailerons and fuselage were all GRP. As in the wings, the PMI foam in the tail was replaced by PVC and the all moving tail was changed to a fixed tailplane, fitted with a spring tab. The canopy is side-hinged. [3] The Mistral-Cs produced by Valentin were little different, though the dihedral is reported to be 4.20°. [4]
The Mistral-C came 3rd out of 33 competitors at the first International Club class competition, held in Sweden in 1979. [2]
In 2010 54 Mistral-Cs were on European civil registers [5] and another 3 were registered in the UK in 2012. [6]
Performance figures at maximum take-off weight unless indicated
Data from Jane's All the World's Aircraft 1984-85 [4]
General characteristics
Performance
The Rolladen-Schneider LS6 is a 15 metre and 18 metre single-seat flapped glider manufactured by Rolladen-Schneider Flugzeugbau GmbH between 1984 and 2003.
The Rolladen-Schneider LS1 is a Standard Class single-seat glider manufactured in Germany by Rolladen-Schneider from 1968 to 1977.
The Schleicher ASW 15 is a single-seat sailplane designed in 1968 by Gerhard Waibel and manufactured by Alexander Schleicher GmbH & Co. The ASW 15 has shoulder-mounted wings and an all-flying tailplane, with its single tow-release placement a compromise between winching and aerotowing. The later ASW 15B had several improvements, including a tow-release placed on the plane of symmetry, an 11 cm taller rudder, a slightly larger main wheel, and the provision of a 90-litre water ballast system.
The ASW 12, initially known as the AS 12, is a single-seat Sailplane of glass composite construction. The wing is shoulder mounted and it has a T-tail. It is essentially a developed production version of the Akaflieg Darmstadt D-36.
The ASW 19 is a single-seat glider built by Alexander Schleicher GmbH & Co, first flying in 1975. It was originally designed as a Standard Class glider, but now mainly competes in the Club Class. The ASW 19 is known for its pleasant handling and some clubs use it as a training glider. It was succeeded by the all-new Schleicher ASW 24.
The ICA IS-29 was a sailplane built in Romania in the 1970s. The prefix IS comes from Iosif Șilimon, the Romanian IAR aeronautical engineer who designed it.
The VSO 10 Vosa is a Standard and Club-Class glider designed and manufactured in the Czechoslovak Republic from December 1978 as a replacement for the VT-116 Orlik II.
The ICA IS-28 is a two-seat sailplane produced in Romania in the 1970s. An all-metal aircraft of conventional design with a T-tail, it was originally produced with 15-metre wings, but in 1973, production shifted to the IS-28B with 17-metre wings and numerous aerodynamic refinements. These included a smaller tail with decreased dihedral, decreased dihedral on the wings, and redesigned fuselage contours. This version first flew on 26 April 1973 and was subsequently produced in versions with flaps (IS-28B2) and without (IS-28B1). Around 100 had been built by the early 1980s, with a substantial number sold for export. On April 7, 1979, Tom Knauff and R. Tawse set a world record with the IS-28 B2 glider, covering a distance of 829 kilometres on a predetermined out-and-return course from the Ridge Soaring Gliderport in Julian, Pennsylvania.
The ICA IS-32 is an open class high-performance metal two-seat sailplane produced in Romania in the 1970s. A refinement of the IS-28B, it shared most of that aircraft's fuselage, mated to new wings and empennage. This new wing had a span of 20 metres, featuring interconnected ailerons and flaps, Schempp-Hirth-type airbrakes. It had no provision for water ballast. The monowheel undercarriage differed from the IS-28 in being fully retractable.
The Akaflieg Berlin B12 is a high performance two-place glider aircraft that was designed and built in Germany. Conceived as a research vehicle, only one unit was constructed.
The Akaflieg Darmstadt D-40 is an experimental variable geometry single seat sailplane, fitted with almost full span, camber changing flaps for optimum aerodynamics in weak thermals and integrated into the wing so as to minimise flap tip drag. One flew successfully but the D-40, like other variable geometry sailplanes, was not commercialised.
The Akaflieg Darmstadt D-39 was a single-seat motor glider derived from the D-38 sailplane. Built in Germany in the late 1970s, it was not intended for production and only one was constructed.
The Akaflieg Braunschweig SB-12 is a single seat, Standard Class sailplane designed around 1980 by German technical university students to test out a new wing profile from the German Aerospace Centre. It was not intended for production, but the sole SB-12 remains active in 2010.
The FVA-20 F. B. Schmetz was a single seat, Standard Class sailplane, built as a one-off aircraft, to explore the application of glass fibre to glider construction. Built over a long period, it finally flew in late 1979.
The Akaflieg Braunschweig SB-7 Nimbus is a Standard class glider designed and built in Germany in the 1960s. It was one of a series of mixed glass fibre and wood designs from the students of Akaflieg Braunschweig.
The Akaflieg Braunschweig SB-8 is an experimental, single-seat, high performance glider built in Germany in the 1960s, constructed largely from glass fibre skin over built up balsa wood structure. Two were built; the second of which was later fitted with a high aspect ratio (30:1) wing, becoming the Akaflieg Braunschweig SB-9 Stratus.
The Akaflieg Braunschweig SB-6 Nixope was an early (1961) GRP high performance single seat glider designed and built in Germany by aeronautical students from Brunswick University. It competed in the 1961 German National gliding competition, coming sixth, and led directly to two further GRP aircraft.
The VFW-Fokker FK-3 is a single seat competition glider, built in Germany in the late 1960s. It had success at the Italian and Austrian national contests of 1968, resulting in a short production run the following year.
The Schleicher K 10 is a Standard class competition glider, designed by Rudolf Kaiser and built in Germany in 1963. Only a few were produced.
The Bertoni Altinger AB-1 Superalbatros is a high-performance sailplane designed and built in Argentina in the 1950s and 1960s.