Indian Chief (motorcycle)

Last updated
Indian Chief
Indian Chief Black Hawk 80 cubic inch 1950.jpg
1950 Indian Chief Black Hawk
ManufacturerHendee Manufacturing Company,
Indian Motocycle Manufacturing Company
Production1922-1942,
1946-1948,
1950-1953,
1999-2003 (IMCOA) [1]
2006-present (IMC) [1]
Assembly Springfield, Massachusetts, United States

Gilroy, CA 1999-2003 Kings Mountain N.C 2006-2011

Spirit Lake, IA 2012- present
PredecessorIndian Powerplus
Class Cruiser
Engine Four-stroke 42° V-twin engine,
61 cu in (1,000 cc) (1922-1928)
74 cu in (1,210 cc) (1923-1942, 1946-1948)
80 cu in (1,300 cc) (1950-1953)
Bore / stroke 61 cu. in.: 3+18 in × 3+3132 in (79 mm × 101 mm) [2] [3]
74 cu. in.: 3+14 in × 4+716 in (83 mm × 113 mm) [2] [4]
80 cu. in.: 3+14 in × 4+1316 in (83 mm × 122 mm)
Suspension Front:
1922-1942: trailing link fork
1946-1948: girder fork
1950-1953: telescopic fork

Rear:
1922-1939: none, rigid
1940-1942, 1946-1948, 1950-1953: plunger
Wheelbase 60.5 in (1,540 mm) [2]

The Indian Chief is a motorcycle that was built by the Hendee Manufacturing Company and the subsequent Indian Motocycle Company from 1922 to the end of the company's production in 1953, and again from 1999 to present.The Chief was Indian's "big twin", a larger, more powerful motorcycle than the more agile Scout used in competition and sport riding.

Contents

When Indian resumed civilian production after World War II, they revived only the Chief line. Production of Indian motorcycles ended with the last Chief made in 1953, then resumed again in 1999.

Origin

1935 Indian Chief at the Barber Vintage Motorsports Museum Indian Chief 1935 Barber.jpg
1935 Indian Chief at the Barber Vintage Motorsports Museum

The Chief was introduced for 1922 to replace the Powerplus, although the Powerplus was continued under the "Standard" name until 1923. [5] Designed by Charles B. Franklin, the Chief had design features similar to Franklin's earlier Scout, including the gearbox bolted to the engine casings and primary drive by gear train. The Chief had a bore of 3+18 inches (79 mm) and a stroke of 3+3132 inches (101 mm), giving a displacement of 61 cubic inches, as the Powerplus/Standard had. Unlike the Powerplus/Standard, the Chief was not offered with rear suspension. [2]

The Big Chief was introduced for 1923. The engine of the Big Chief was bored to 3+14 inches (83 mm) and stroked to 4+716 inches (113 mm), giving a displacement of 74 cubic inches. The Big Chief had mainly been offered for sidecar use, but was popular with solo riders as well. [2] The smaller-engined Chief was discontinued in 1928, partly to accommodate increased production of the Model 101 Scout. [6]

Development

For 1940, the Chief frame was modified to include plunger rear suspension. In the same year, all Indian models were restyled with large, decorative fenders. [7] [8] [9]

The Indian 340-B was a military motorcycle based on the Chief. The 340-B had open fenders and was usually supplied with a sidecar. Customers included the US. military, which received about 3,000, and France, which received 5,000 before it surrendered to Germany in 1940. [10]

Post-war

1948 Indian Chief Indian 1948 Chief 1.jpg
1948 Indian Chief

After World War II, the Chief was the only pre-war Indian model to be manufactured. The leaf-sprung trailing-link fork used before the war was replaced by girder forks similar to those used by the military 841 and the Sport Scout. [11]

No Chiefs were made for 1949. [12] The Chief returned to the lineup for 1950, with telescopic forks replacing the girder forks and with the engine stroked to 80 cu in (1,300 cc). [13] [14] Production of the Chief ended in 1953, upon which Indian ceased production of motorcycles. [15]

Later Chiefs

Brockhouse

In 1959, Brockhouse Engineering, owners of the Indian trademarks and distribution network, sold a rebadged Royal Enfield Meteor as an Indian Chief. [16]

1999-2013

Post-1998 Indian Chief Indian motorcycle 1a.JPG
Post-1998 Indian Chief

The Indian Motorcycle Company of America (IMCA) manufactured Indian Chief motorcycles in Gilroy, California, from 1999 to 2003. [17] [18] These initially used clones of Harley-Davidson Evolution engines built from S&S parts. Later versions used the in-house "Powerplus" engine. [17]

A new company began production of Indian Chiefs in 2006 in King's Mountain, North Carolina. [18] These were updated versions of the IMCA Chief. [19] [20] Production of the Chief was moved to Spirit Lake, Iowa, after Polaris Industries bought the company. [18]


2014-present

In 2014, Indian released a new Indian Chief motorcycle with a new engine. Nothing on the 2014 Chief is based on the earlier Chief bought from the King's Mountain company. [20]

Notes

  1. 1 2 Different motorcycle,not as described in this infobox, not built in Springfield.
  2. 1 2 3 4 5 Girdler 2002, p. 70.
  3. Hatfield 2006, p. 302.
  4. Wilson 1993, p. 39.
  5. Girdler 2002, pp. 69–70.
  6. Girdler 2002, p. 86.
  7. RM Lot 301: 1946 Indian Chief Roadmaster Motorcycle
  8. Hatfield 2006, p. 347.
  9. Girdler 2002, p. 125.
  10. Doyle 2011, p. 13.
  11. Girdler 2002, p. 140.
  12. Hatfield 2006, p. 354.
  13. Wilson 1995, p. 107.
  14. Girdler 2002, p. 172.
  15. Girdler 2002, p. 174.
  16. Wilson 1995, p. 109.
  17. 1 2 Carrithers 2010.
  18. 1 2 3 Fogelson 2013.
  19. Cathcart 2009.
  20. 1 2 Hoyer 2013.

Related Research Articles

<span class="mw-page-title-main">Harley-Davidson</span> American motorcycle manufacturer

Harley-Davidson, Inc. is an American motorcycle manufacturer headquartered in Milwaukee, Wisconsin, United States. Founded in 1903, it is one of two major American motorcycle manufacturers to survive the Great Depression along with its historical rival, Indian Motorcycles. The company has survived numerous ownership arrangements, subsidiary arrangements, periods of poor economic health and product quality, and intense global competition to become one of the world's largest motorcycle manufacturers and an iconic brand widely known for its loyal following. There are owner clubs and events worldwide, as well as a company-sponsored, brand-focused museum.

<span class="mw-page-title-main">Indian Motocycle Manufacturing Company</span> Motorcycle marque

Indian Motorcycle is an American brand of motorcycles owned and produced by American automotive manufacturer Polaris Inc.

<span class="mw-page-title-main">Brough Superior</span> Brand of English motorcycles and automobiles

Brough Superior motorcycles, sidecars, and motor cars were made by George Brough in his Brough Superior works on Haydn Road in Nottingham, England, from 1919 to 1940. The motorcycles were dubbed the "Rolls-Royce of Motorcycles" by H. D. Teague of The Motor Cycle newspaper. Approximately 3048 motorcycles were made in the 21 years of production; around a third of that production still exists. T. E. Lawrence owned eight of these motorcycles and died from injuries sustained when he crashed number seven; the eighth was on order. Moving forward to 2008, vintage motorcycle enthusiast Mark Upham acquired the rights to the Brough Superior name. In 2013 he met motorcycle designer Thierry Henriette and asked him to design a new Brough Superior motorcycle. Three months later a prototype of a new SS100 was shown in Milan.

Henderson was a manufacturer of 4-cylinder motorcycles from 1912 until 1931. They were the largest and fastest motorcycles of their time, and appealed to both sport riders and police departments. Police favored them for traffic patrol because they were faster than anything else on the roads. The company began during the golden age of motorcycling, and ended during the Great Depression.

<span class="mw-page-title-main">IOE engine</span> Type of combustion engines

The intake/inlet over exhaust, or "IOE" engine, known in the US as F-head, is a four-stroke internal combustion engine whose valvetrain comprises OHV inlet valves within the cylinder head and exhaust side-valves within the engine block.

<span class="mw-page-title-main">BMW R60/2</span> Type of motorcycle

The R60 and R60/2 are 600 cc boxer-twin that were manufactured from 1956 to 1969 in Munich, Germany, by BMW.

<span class="mw-page-title-main">Mustang (motorcycle)</span> Motor vehicle engine

The Mustang was a lightweight motorcycle built by Gladden Products Corporation in Glendale, California, from 1946 to 1965. The second production version, the Mustang Model 2, was among the first motorcycle manufactured in the United States to have a telescopic fork.

<span class="mw-page-title-main">Motorcycle fork</span> Component of motorized two-wheelers

A motorcycle fork connects a motorcycle's front wheel and axle to its frame, typically via a yoke, also known as a triple clamp, which consists of an upper yoke joined to a lower yoke via a steering stem, a shaft that runs through the steering head, creating the steering axis. Most forks incorporate the front suspension and front brake, and allow the front wheel to rotate about the steering axis so that the bike may be steered. Most handlebars attach to the top clamp in various ways, while clip-on handlebars clamp to the fork tubes, either just above or just below the upper triple clamp.

<span class="mw-page-title-main">Excelsior Super X</span> Forty-five cubic inch motorcycle

The Excelsior Super X was a motorcycle manufactured by the Excelsior Motor Manufacturing & Supply Company from 1925 to 1931. It was the most famous Excelsior motorcycle manufactured by that company and was the first American forty-five cubic inch motorcycle.

<span class="mw-page-title-main">Indian 841</span> Type of motorcycle

The Indian 841 was a motorcycle designed by the Indian Motocycle Manufacturing Co. for desert warfare. It pioneered the drivetrain configuration later popularized by Moto Guzzi, having a longitudinally mounted air-cooled 90-degree V-twin with shaft drive to the rear wheel.

<span class="mw-page-title-main">Indian Four</span> Motorcycle

The Indian Four was a motorcycle built by the Indian Motocycle Company from 1928 to 1942. It was based on the Ace motorcycle, which Indian bought as part of the assets of the Ace Motor Corporation in 1927.

<span class="mw-page-title-main">ABC motorcycles</span> British motorcycle manufacturer

ABC motorcycles was a British motorcycle manufacturer established in 1914 by Ronald Charteris in London. Several British motorcycle firms started up with the name "ABC", including Sopwith. The All British Engine Company Ltd. of London was founded in 1912 and later changed to ABC Motors Ltd. With chief engineer Granville Bradshaw, Charteris built a range of engines throughout the First World War. From 1913 ABC produced motorcycle engines.

<span class="mw-page-title-main">Heinkel Tourist</span> German motor scooter (1953–1965)

The Heinkel Tourist is a motor scooter that was made by Heinkel Flugzeugwerke from 1953 to 1965. More than 100,000 were manufactured and sold.

<span class="mw-page-title-main">Indian Scout (motorcycle)</span> Motorcycle

The Indian Scout is a motorcycle built by the Indian Motocycle Company from 1920 to 1949. It rivaled the Chief as Indian's most important model. The 101 Scout, made from 1928 to 1931, has been called the best motorcycle Indian ever made. A second line of Scouts, with heavier frames, was introduced in 1932 alongside the Standard Scout, which replaced the 101 Scout and shared its frame with the Chief and the Four. The small-displacement Scout and the Sport Scout, introduced in 1934, were continued until the end of civilian production in 1942. Military versions of both models were used by US and other Allied forces during World War II.

<span class="mw-page-title-main">Charles Franklin</span> Irish motorcycle designer and racer

Charles Bayly Franklin was an engineer and a motorcycle racer. He designed motorcycles for the Indian Motocycle Company, including the original Indian Scout of 1920, the original Indian Chief of 1922, and the Indian 101 Scout of 1928. Prior to this, he had been part of the Indian motorcycle team that won first, second, and third place in the 1911 Isle of Man TT, finishing in second place. Franklin was inducted into the AMA Motorcycle Hall of Fame in 2016.

<span class="mw-page-title-main">Excelsior Motor Manufacturing & Supply Company</span>

Excelsior Motor Manufacturing & Supply Company was an American motorcycle manufacturer operating in Chicago from 1907 to 1931. It was purchased by Ignaz Schwinn, proprietor of bicycle manufacturer Arnold, Schwinn & Co. in 1912. In 1912, an Excelsior was the first motorcycle to be officially timed at a speed of 100 mph. The Henderson Motorcycle Company became a division of Excelsior when Schwinn purchased Henderson in 1917. By 1928, Excelsior was in third place in the U.S. motorcycle market behind Indian and Harley-Davidson. The Great Depression convinced Schwinn to order Excelsior's operations to cease in September 1931.

<span class="mw-page-title-main">Cleveland Motorcycle Manufacturing Company</span> Former American motorcycle manufacturer

The Cleveland Motorcycle Manufacturing Company, sometimes called Cleveland Motorcycle, was a motorcycle manufacturer in Cleveland, Ohio, from 1902 to 1905 and again from 1915 to 1929.

The Indian Prince is a motorcycle manufactured by the Hendee Manufacturing Company from 1925 to 1928. An entry-level single-cylinder motorcycle, the Prince was restyled after its first year and discontinued after four years.

<span class="mw-page-title-main">Indian Powerplus</span> Type of motorcycle

The Indian Powerplus is a motorcycle that was built from 1916 to 1924 by the Hendee Manufacturing Company. Designed by Charles Gustafson, the Powerplus's engine was Indian's first flathead.

<span class="mw-page-title-main">Triumph 6/1</span> British motorcycle

The Triumph 6/1 is a motorcycle that was made by Triumph at their Coventry factory from 1934 to 1936. Designed by Val Page, the 6/1 was the first Triumph motorcycle to use a parallel-twin engine. A sidecar-equipped 6/1 won a silver medal in the 1933 International Six Days Trial and went on to win the Maudes Trophy for 1933. The 6/1 was a commercial failure, selling fewer than 600 in two years on the market.

References