Interchangeable NPA and central office codes

Last updated

In the North American Numbering Plan (NANP), interchangeable NPA and central office codes constituted a change in numbering plan design and policy, to mitigate exhaustion of the numbering resources of the ten-digit telephone numbers used in the closed numbering plan of the NANP.

Contents

Interchangeable numbering plan area (NPA) codes and central office codes are codes that permit any of the ten numerals in the middle position of the area code and the central office code, which both are three-digit numbers. [1] [2] This change in numbering format was implemented first for central office codes by 1973, which eliminated the restriction in the middle digit (2 to 9) to also permit 0 and 1. The middle position of the area code could only be 0 and 1. In 1995, this restriction for area codes was lifted as well, creating interchangeable NPA codes.

History and background

The ten-digit telephone numbers of the North American Numbering Plan consist of a three-digit numbering plan area code (NPA code), written as the most-significant part of the national telephone number, followed by the three-digit central office code, and the four-digit local line or station number.

From 1947 to 1995, all NPA codes were distinguished with the digits 0 or 1 in the middle position. This provided the traditional format N 0/1 X, where N is any digit from 2 to 9, and X is any of the ten numerals. This format provided a set of 160 combinations, but only 144 were in use for geographic NPA codes. N00 and N11 were reserved for special service codes. In contrast, until 1974, central office codes had the format N N X, forbidding digits 0 and 1 in the middle position.

These formats permitted direct distinction of NPA codes from central office prefixes by examination of the second digit dialed, which was necessary for automatic recognition of seven-digit dialing for calls within the local calling area, especially with common control switching equipment. Seven-digit dialing was standardized starting in the 1940s, in preparation of Operator Toll Dialing, and later Direct Distance Dialing (DDD), and was mostly complete in all but the most isolated or rural areas by 1970. DDD service for subscribers commenced in 1951 in a trial in Englewood, New Jersey.

The Bell System engineers expected that the first numbering plan areas to require more than the 640 possible central office code would not occur before c. 1973. [3] The solution for expanding the numbering pool within an NPA was to remove the restriction posed by not using 0 and 1 in the middle position of central office codes. This made central office codes interchangeable.

An interchangeable NPA code and an interchangeable central office code is a code that permits any of the ten numerals in the middle position of the code. [2]

Interchangeable central office codes

By 1971 the North American network had been prepared for operation with central office codes that permitted the digits 0 and 1 as the middle digit, i.e. with the number format NXX (less N11), where N=2–9, and X=0–9. [4] Starting in c. 1974, large American cities (Los Angeles and New York City) began introducing office codes of this format, [2] to keep up with demand while postponing area code splits by a few more years.

In step-by-step offices, implementation usually required dialing an extra prefix to select a long-distance trunk that could route calls dialed with an area code; 112 and 115 were early choices, but 1 became eventually common. [4] In geographically small numbering plan areas that already were a single local calling area, it did not cause confusion in long-distance dialing, but in some cases, it became necessary to implement ten-digit dialing of long-distance calls within the same area code. This necessity was more common as interchangeable central office codes were introduced in more area codes. In the late 1980s, Bellcore, which administered the North American Numbering Plan, made it mandatory to implement interchangeable central office codes before area code relief would be approved. Thus, ten-digit dialing became more common in many area codes.

Interchangeable NPA codes

By 1990, Bellcore determined the need for interchangeable NPA codes, which would be implemented no sooner than January 1, 1995. [1] By that date, all telephone callers, even those in area codes that did not yet have interchangeable central office codes, would be required to dial all ten digits for long-distance calls, including such calls within the same area code. Canadian telephone companies made the change in Fall 1994 outside of area code 905, which had already implemented the requirement (before the split from 416) in 1990. The implementation of interchangeable area codes added 640 new codes to the numbering pool.

The introduction of interchangeable codes required new technology for distinguishing a subscriber's intent of dialing seven or ten digits. Two methods were available, timing and extra prefixes. [2] In the timing solution, the switching equipment would wait for more digits only for a critical time-out interval of three to five seconds. Such timing measurements were not necessary when no ambiguity existed from pretranslation. The preferred arrangement, over timing, was the prefix method, in which the subscriber had to start dialing ten-digit calls with a 0 or 1 preceding the full telephone number. The preference was based on Bell System behavioral research, but technical aspect also favored this arrangement in some cases, in that it could shorten post-dial delay with new equipment.

The first interchangeable NPA codes were area code 334 in Alabama and area code 360 in Washington state only, which entered mandatory use on January 15, 1995.

Related Research Articles

<span class="mw-page-title-main">North American Numbering Plan</span> Integrated telephone numbering plan of twenty North American countries

The North American Numbering Plan (NANP) is a telephone numbering plan for twenty-five regions in twenty countries, primarily in North America and the Caribbean. This group is historically known as World Zone 1 and has the international calling code 1. Some North American countries, most notably Mexico, do not participate in the NANP.

A telephone numbering plan is a type of numbering scheme used in telecommunication to assign telephone numbers to subscriber telephones or other telephony endpoints. Telephone numbers are the addresses of participants in a telephone network, reachable by a system of destination code routing. Telephone numbering plans are defined in each of the administrative regions of the public switched telephone network (PSTN) and in private telephone networks.

<span class="mw-page-title-main">Area codes 314 and 557</span> Telephone area code for St. Louis, Missouri

Area codes 314 and 557 are telephone area codes in the North American Numbering Plan (NANP) in the U.S. state of Missouri, serving St. Louis and most of its inner-ring suburbs in neighboring St. Louis County. The numbering plan area is bordered to the west by area code 636, which serves St. Louis' outer suburbs to the west, south, and north. Across the Mississippi River to the east, 314 is adjacent to area code 618, which serves southern Illinois and most of Metro East. Area code 557 was added to the 314 numbering plan area on August 12, 2022, to form an overlay numbering plan.

Ten-digit dialing is a telephone dialing procedure in the countries and territories that are members of the North American Numbering Plan (NANP). It is the practice of including the area code of a telephone number when dialing to initiate a telephone call. When necessary, the ten-digit number may be prefixed with the trunk code 1, which is referred to as 1+10-digit dialing or national format.

Seven-digit dialing is a telephone dialing procedure customary in some territories of the North American Numbering Plan (NANP) for dialing telephone numbers in the same numbering plan area (NPA). NANP telephone numbers consist of ten digits, of which the leading three are the area code. In seven-digit dialing it is not necessary to dial the area code. The procedure is also sometimes known as local format or network format.

Number pooling is a method of reallocating telephony numbering space in the North American Numbering Plan, primarily in growth areas in the United States.

<span class="mw-page-title-main">Area codes 740 and 220</span> Telephone area codes for southeastern Ohio

Area codes 740 and 220 are telephone area codes in the North American Numbering Plan (NANP) for the southeastern and central parts of Ohio. The numbering plan area (NPA) includes the cities of Athens, Belpre, Cadiz, Chillicothe, Circleville, Coshocton, Delaware, Gallipolis, Heath, Ironton, Jackson, Lancaster, Laurelville, Logan, Marietta, Marion, Mount Vernon, Nelsonville, Newark, Newcomerstown, Pataskala, Portsmouth, Rockbridge, Steubenville, Washington Court House, and Zanesville, Shadyside and the surrounding areas. It does not include the city of Columbus and rate centers in Franklin County which primarily use area code 614. Although it is Ohio's largest area code by geographic size, Southeastern Ohio is largely rural and has fewer residents overall than the rest of the state except in the areas near Columbus. 220 is the lowest-numbered area code in the system, that doesn't have a 0 or 1 in the middle.

<span class="mw-page-title-main">Area codes 202 and 771</span> Area code for Washington, D.C.

Area codes 202 and 771 are telephone area codes in the North American Numbering Plan (NANP) for Washington, D.C.

<span class="mw-page-title-main">Telephone exchange names</span> Alphabetic telephone numbering plan

A telephone exchange name or central office name was a distinguishing and memorable name assigned to a central office. It identified the switching system to which a telephone was connected, and facilitated the connection of telephone calls between switching systems in different localities.

Area code 246 is the telephone area code in the North American Numbering Plan (NANP) for Barbados. Telecommunication services in Barbados are regulated by the Government of Barbados's telecommunications unit. The number 246 spells BIM on an alpha-numeric telephone keypad, a nickname for the island.

Area codes 876 and 658 are telephone area codes in the North American Numbering Plan (NANP) for Jamaica.

<span class="mw-page-title-main">Area codes 301 and 240</span> North American telephone area codes in Maryland, U.S.

Area codes 301 and 240 are telephone area codes in the North American Numbering Plan (NANP) for the western part of the U.S. state of Maryland. The numbering plan area (NPA) comprises Maryland's portion of the Greater Washington, D.C. metro area, portions of southern Maryland, along with rural western Maryland. This includes the communities of Cumberland, Frederick, Hagerstown, Gaithersburg, Potomac, Germantown, Bethesda, Rockville, Landover, Silver Spring, and Waldorf.

<span class="mw-page-title-main">Area code 660</span> Telephone area code for northern and western Missouri, United States

Area code 660 is the telephone area code in the North American Numbering Plan (NANP) for the northern and western part of the U.S. state of Missouri. It was created on October 12, 1997, in an area code split of the 816 numbering plan area (NPA)

<span class="mw-page-title-main">Area code 816</span> Area code in northwestern Missouri, United States

Area code 816 is a telephone area code in the North American Numbering Plan (NANP) for Kansas City, St. Joseph, and all or part of 15 surrounding counties in northwestern Missouri. The numbering plan area originally comprised most of the northern and western two-thirds of the state, bordering with Arkansas, Illinois, Iowa, Kansas, Nebraska, and Oklahoma, but has been reduced to a ribbon bordering Kansas. 816 is one of the original 86 area codes created in 1947.

The expansion of the North American Numbering Plan (NANP) is the anticipated requirement for providing more telephone numbers to accommodate future needs beyond the pool of ten-digit telephone numbers. Ten-digit telephone numbers have been in use in the United States and Canada in long-distance telephone service since 1947. An October 2020 analysis estimated that the numbering plan would not be exhausted until after the year 2050.

Telephone numbers in Canada follow the fixed-length format of the North American Numbering Plan (NANP) of a three-digit area code, a three-digit central office code, and a four-digit station or line code. This is represented as NPA NXX XXXX.

National conventions for writing telephone numbers vary by country. While international standards exist in the form of recommendation E.123 by the sector ITU-T of the International Telecommunication Union (ITU), national telephone numbering plans define the format of telephone numbers assigned to telephones and similar communication endpoints.

<span class="mw-page-title-main">Telephone number</span> Sequence of digits assigned to a telephone subscription

A telephone number is a sequence of digits assigned to a landline telephone subscriber station connected to a telephone line or to a wireless electronic telephony device, such as a radio telephone or a mobile telephone, or to other devices for data transmission via the public switched telephone network (PSTN) or other public and private networks.

The original North American area codes were established by the American Telephone and Telegraph Company (AT&T) in 1947, following the demonstration of regional Operator Toll Dialing during the World War II period. The program had the goal of speeding the connecting times for long-distance calling by eliminating intermediary telephone operators. Expanding this technology for national use required a comprehensive and universal, continent-wide telephone numbering plan.

References

  1. 1 2 North American Numbering Plan Administration (1993-01-13). "Status of Numbering Plan Area (NPA) Codes in World Zone 1, Bellcore Information Letter IL–93/01-017" (PDF). Bellcore. Retrieved 2020-08-21.
  2. 1 2 3 4 AT&T Network Planning Division, Notes on the Network, Section 2 (1980)
  3. ↑ AT&T, Notes on Distance Dialing, section 4, p.6 (1968).
  4. 1 2 Bell Telephone Laboratories Staff, Engineering and Operations in the Bell System, 2nd Edition (1984). p.118
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.