Jaeger | |
---|---|
![]() Charles Jaeger, the creator of the car, seated in the first Jaeger car to be manufactured, in 1931. Photographed in front of the family home he built, 215 W. Woodland Avenue, Ferndale. | |
Overview | |
Manufacturer | Jaeger Motor Corporation of America |
Production | 1931 |
Assembly | Belleville, Michigan, United States |
Designer | Charles F. Jaeger |
Body and chassis | |
Class | Sports car |
Powertrain | |
Engine | six-cylinder Continental engine |
The Jaeger was an automobile built in Belleville, Michigan by the Jaeger Motor Car Company from 1932 to 1933. [1]
Charles F. Jaeger patented a novel suspension for automobiles which included two coils in tandem at each wheel separated by the axle mounting. The Jaeger automobile was built to develop this suspension and was powered by a six-cylinder Continental engine, rated at 70 hp (52 kW). Wire wheels were standard on the vehicle, with a V-radiator grille and three diagonal groups of four louvers on each side of the bonnet. Five coupes and convertible coupes were actually produced. The vehicle sold for $700, equivalent to $16,476in 2023. [1] [2]
A coupe or coupé is a passenger car with a sloping or truncated rear roofline and typically with two doors.
The Chevrolet Corvette is a line of American two-door, two-seater sports cars manufactured and marketed by General Motors under the Chevrolet marque since 1953.
Nash Motors Company was an American automobile manufacturer based in Kenosha, Wisconsin from 1916 until 1937. From 1937 through 1954, Nash Motors was the automotive division of Nash-Kelvinator. As sales of smaller firms declined after 1950 in the wake of the domestic Big Three automakers’ advantages in production, distribution, and revenue, Nash merged with Hudson Motors to form American Motors Corporation (AMC). Nash automobile production continued from 1954 through 1957 under AMC.
The Chevrolet Corvair is a rear-engined, air-cooled compact car manufactured and marketed by Chevrolet over two generations between 1960 and 1969. A response to the Volkswagen Beetle, it was offered in 4-door sedan, 2-door coupe, convertible, 4-door station wagon, passenger van, commercial van, and pickup truck body styles in its first generation (1960–1964), and as a 2-door coupe, convertible or 4-door hardtop in its second (1965–1969). Total production was approximately 1.8 million vehicles from 1960 until 1969.
Panhard was a French motor vehicle manufacturer that began as one of the first makers of automobiles. It was a manufacturer of light tactical and military vehicles. Its final incarnation, now owned by Renault Trucks Defense, was formed by the acquisition of Panhard by Auverland in 2005, and then by Renault in 2012. In 2018 Renault Trucks Defense, ACMAT and Panhard combined under a single brand, Arquus.
The Oldsmobile Cutlass was a series of automobiles produced by General Motors' Oldsmobile division between 1961 and 1999. At its introduction, the Cutlass was Oldsmobile's entry-level model; it began as a unibody compact car, but saw its greatest success as a body-on-frame intermediate. The Cutlass was named after Vought F7U Cutlass, as well as the type of sword, which was common during the Age of Sail.
The Brass Era is an American term for the early period of automotive manufacturing, named for the prominent brass fittings used during this time for such features as lights and radiators. It is generally considered to encompass 1896 through 1915, a time when cars were often referred to as horseless carriages.
The Dodge Omni and the nearly identical badge engineered variant, the Plymouth Horizon, is a subcompact car manufactured and marketed by Chrysler Corporation for model years 1978–1990. The first Chrysler model line produced with front-wheel drive, the Omni and Horizon were also the first front-wheel drive economy cars assembled in the United States. Marketed for eleven years with very few changes, around 2,500,000 Omnis and Horizons were manufactured, with the Plymouth variants more popular than the Dodge-branded models.
The Buick Skyhawk is an automobile produced by Buick in two generations for the 1975 through 1989 model years.
The Chevrolet Vega is a subcompact automobile that was manufactured and marketed by GM's Chevrolet division from 1970 to 1977. Available in two-door hatchback, notchback, wagon, and sedan delivery body styles, all models were powered by an inline four-cylinder engine designed specifically for the Vega, with a lightweight, aluminum alloy cylinder block. The Vega first went on sale in Chevrolet dealerships on September 10, 1970. Variants included the Cosworth Vega, a short-lived limited-production performance model, introduced in the spring of 1975.
The BMW 3 Series (E46) is the fourth generation of the BMW 3 Series range of compact executive cars manufactured by German automaker BMW. Produced from 1997 to 2006, it was the successor to the E36 3 Series, which ceased production in 2000. It was introduced in November 1997, and available in sedan, coupé, convertible, station wagon and hatchback body styles. The latter has been marketed as the 3 Series Compact.
A de Dion axle is a form of non-independent automobile suspension. It is a considerable improvement over the swing axle, Hotchkiss drive, or live axle. Because it plays no part in transmitting power to the drive wheels, it is sometimes called a "dead axle".
The Honda S600 is an automobile manufactured by Honda. It was launched in March 1964. Available as a roadster, bearing strong resemblance to the Honda S500, and as a fastback coupé, introduced in March 1965, the S600 was the first Honda available in two trim levels. During its production run up to 1966, the model styling would remain pretty much the same, with the most notable changes coming to the front grille, bumper, and headlights.
A compact sport utility vehicle or compact SUV is a class of small sport utility vehicles that is larger than mini SUVs, but smaller than mid-size SUVs. However, there is no official definition of the size or dimensions for this market segment. Moreover, some manufacturers have marketed the same model name on different sized vehicles over time. The most common distinction between versions of crossover automobiles and compact-sized SUVs is that the first is based on a car-based unibody platform, while an SUV uses the unibody with welded-in ladder frame or body-on-frame chassis commonly used on trucks. However, manufacturers and common usage has blurred the two terms. Many recent vehicles labelled as compact SUVs are technically compact crossovers and are built on the platform of a compact/C-segment passenger car, while some models may be based on a mid-size car (D-segment) or a B-segment platform.
Bufori is a brand of hand-built automobiles inspired by American 1930s coupes. The company is owned by three Australian Lebanese brothers Anthony, George and Gerry Khouri. In 1986, Gerry Khouri began to build three special sports cars in his garage, one each for the three brothers, which led to the formation of the company. The name Bufori is an acronym that stands for B – Beautiful, U – Unique, F – Funtastic, O – Original, R – Romantic, I – Irresistible.
Crude ideas and designs of automobiles can be traced back to ancient and medieval times. In 1649, Hans Hautsch of Nuremberg built a clockwork-driven carriage. In 1672, a small-scale steam-powered vehicle was created; the first steam-powered automobile capable of human transportation was built by Nicolas-Joseph Cugnot in 1769. Inventors began to branch out at the start of the 19th century, creating the de Rivaz engine, one of the first internal combustion engines, and an early electric motor. Samuel Brown later tested the first industrially applied internal combustion engine in 1826. Only two of these were made.
Air suspension is a type of vehicle suspension powered by an electric or engine-driven air pump or compressor. This compressor pumps the air into a flexible bellows, usually made from textile-reinforced rubber. Unlike hydropneumatic suspension, which offers many similar features, air suspension does not use pressurized liquid, but pressurized air. The air pressure inflates the bellows, and raises the chassis from the axle.
A bucket seat is a car seat contoured to hold one person, distinct from a flat bench seat designed to fit multiple people. In its simplest form, it contours somewhat to the human body, but may have a deep seat and exaggerated sides that partially enclose and support the body in high-performance automobiles.
A vehicle frame, also historically known as its chassis, is the main supporting structure of a motor vehicle to which all other components are attached, comparable to the skeleton of an organism.
The 1950s were pivotal for the American automobile industry. The post-World War II era brought a wide range of new technologies to the automobile consumer, and a host of problems for the independent automobile manufacturers. The industry was maturing in an era of rapid technological change; mass production and the benefits from economies of scale led to innovative designs and greater profits, but stiff competition between the automakers. By the end of the decade, the industry had reshaped itself into the Big Three, Studebaker, and AMC. The age of small independent automakers was nearly over, as most of them either consolidated or went out of business.