KVM Splitter

Last updated March 25, 2023

A KVM (Keyboard Video Mouse) Splitter, also known as a Reverse KVM switch, is a hardware device that allows users to control a single computer from one or more sets of keyboards, video monitors, and mice. With a KVM splitter, users access the connected computer consecutively rather than simultaneously. It differs from a KVM Switch which allows multiple computers to be controlled, usually, by a single keyboard, monitor and mouse.

Types

There are two main functional designs of KVM splitters:

Emulation: In an emulation based design, the KVM splitter feeds the emulated controls from the active keyboard and mouse to the connected computer. A PS/2 KVM splitter must be emulation based, because PS/2 computers only have two PS/2 connectors – one designated for a keyboard and one for a mouse. In contrast, a USB computer tends to have multiple USB ports, which are not designated for a specific device. Keyboards, mice, external storage devices, printers, etc. can be connected to the USB ports on a computer. USB KVM splitters can also be emulation based, but they tend to be built using a hub-based design.

Hub Based: When a KVM splitter is hub based, it functions similar to having multiple keyboards and mice connected to a single computer. Instead of sending one emulated signal to the computer based on an active keyboard and mouse, the hub-based splitter continuously feeds the active controls and emulation is not needed.

Signals

Common input and output video signals for KVM splitters include HDMI, DVI, and VGA. Keyboard and mouse input and output signals are PS/2 or USB. Some KVM splitters also offer additional USB input ports to connect peripheral devices, such as external hard disk drives and printers, which can be shared across all users.

Monitor

As one computer is feeding video for multiple monitors, there are a few ways KVM splitters can handle the potentially different DDC and EDID transmissions from the monitors.^[1]

Pass-through: the KVM splitter transfers the EDID data directly from a display connected to the primary port to a source. If all monitors are identical, this will not be an issue. However, if different monitors are used, the EDID from the primary monitor may not be compatible with others.
Built-in: the KVM splitter fakes the EDID data using an EEPROM with a generic EDID. This provides less compatibility as there is no communication between the monitors and the computer, and monitors that do not support the generic EDID may not work.
EDID learning: the KVM splitter reads EDID from all connected monitors and creates a new EDID table with the common resolutions amongst the displays. This ensures the best compatibility when many different monitors are used.

Usage

A KVM Splitter can be used by multiple users to control a single computer from multiple locations. Any user can access the computer and its programs from their workstation. There are a few activation modes KVM splitters operate in, which limits simultaneous user activity.

User specific: only one selectable user is active, other users can view what is happening.
Instantaneous mode: different users can immediately access the computer after the last keystroke or mouse movement by the active user.
Delay mode: a selectable delay, e.g. 5 seconds, occurs before another user can access the computer after the last keystroke or mouse movement by the active user.

The method of switching from one user to another depends on the KVM splitter and supported modes of operation. Rotary switches, active electronic switches, push buttons or automatic activation via keystrokes/mouse are some of the switching methods commonly used.

KVM Splitters can be combined with KVM switches and KVM extenders (which provide a way to relocate keyboard, monitor, and mouse to a far distance from the computer) to set up more complex configurations. For example, multiple users can access the same computer without the need for physical proximity to the computer. A common industrial application is to allow access to a computer located in a cleanroom from outside, to restrict the level of contamination. By providing access to multiple users through a KVM splitter, pollutants can be minimized by reducing the need for the users to enter the cleanroom.^[2]

Related Research Articles

<span class="mw-page-title-main">Scroll Lock</span> Computer key

Scroll Lock is a lock key on most IBM-compatible computer keyboards.

<span class="mw-page-title-main">Keystroke logging</span> Action of recording the keys struck on a keyboard

Keystroke logging, often referred to as keylogging or keyboard capturing, is the action of recording (logging) the keys struck on a keyboard, typically covertly, so that a person using the keyboard is unaware that their actions are being monitored. Data can then be retrieved by the person operating the logging program. A keystroke recorder or keylogger can be either software or hardware.

The Display Data Channel, or DDC, is a collection of protocols for digital communication between a computer display and a graphics adapter that enable the display to communicate its supported display modes to the adapter and that enable the computer host to adjust monitor parameters, such as brightness and contrast.

A human interface device or HID is a type of computer device usually used by humans that takes input from humans and gives output to humans.

<span class="mw-page-title-main">KVM switch</span> Device that connects computer front-end hardware to multiple computers

A KVM switch is a hardware device that allows a user to control multiple computers from one or more sets of keyboards, video monitors, and mice.

QEMU is a free and open-source emulator. It emulates the machine's processor through dynamic binary translation and provides a set of different hardware and device models for the machine, enabling it to run a variety of guest operating systems. It can interoperate with Kernel-based Virtual Machine (KVM) to run virtual machines at near-native speed. QEMU can also do emulation for user-level processes, allowing applications compiled for one architecture to run on another.

Multiplicity is a computer program that enables one keyboard and mouse to access two or more client computers from a host computer. It was developed for Stardock as part of their ThinkDesk subscription service, but is available separately.

The PS/2 port is a 6-pin mini-DIN connector used for connecting keyboards and mice to a PC compatible computer system. Its name comes from the IBM Personal System/2 series of personal computers, with which it was introduced in 1987. The PS/2 mouse connector generally replaced the older DE-9 RS-232 "serial mouse" connector, while the PS/2 keyboard connector replaced the larger 5-pin/180° DIN connector used in the IBM PC/AT design. The PS/2 keyboard port is electrically and logically identical to the IBM AT keyboard port, differing only in the type of electrical connector used. The PS/2 platform introduced a second port with the same design as the keyboard port for use to connect a mouse; thus the PS/2-style keyboard and mouse interfaces are electrically similar and employ the same communication protocol. However, unlike the otherwise similar Apple Desktop Bus connector used by Apple, a given system's keyboard and mouse port may not be interchangeable since the two devices use different sets of commands and the device drivers generally are hard-coded to communicate with each device at the address of the port that is conventionally assigned to that device.

In computing, the USB human interface device class is a part of the USB specification for computer peripherals: it specifies a device class for human interface devices such as keyboards, mice, game controllers and alphanumeric display devices.

A multiseat, multi-station or multiterminal system is a single computer which supports multiple independent local users at the same time.

Hardware keyloggers are used for keystroke logging, a method of capturing and recording computer users' keystrokes, including sensitive passwords. They can be implemented sala madarevel firmware, or

The IBM Remote Supervisor Adapter is a full-length ISA or PCI adapter produced by the IBM corporation.

<span class="mw-page-title-main">Remote desktop software</span> Desktop run remotely from local device

In computing, the term remote desktop refers to a software- or operating system feature that allows a personal computer's desktop environment to be run remotely off of one system, while being displayed on a separate client device. Remote desktop applications have varying features. Some allow attaching to an existing user's session and "remote controlling", either displaying the remote control session or blanking the screen. Taking over a desktop remotely is a form of remote administration.

<span class="mw-page-title-main">Mouse button</span> Electric switch on a computer mouse

A mouse button is an electric switch on a computer mouse which can be pressed (“clicked”) to select or interact with an element of a graphical user interface. Mouse buttons are most commonly implemented as miniature snap-action switches.

Dynamic device mapping is a technology for USB KVM switches which is sometimes implemented as an alternative to standard USB keyboard and mouse emulation.

A headless computer is a computer system or device that has been configured to operate without a monitor, keyboard, and mouse. A headless system is typically controlled over a network connection, although some headless system devices require a serial connection to be made over RS-232 for administration of the device. Headless operation of a server is typically employed to reduce operating costs.

Dynamic device mapping is a technology for USB KVM switches which is sometimes implemented as an alternative to standard USB keyboard and mouse emulation. Reverse DDM, on the other hand, is a related technology that allows further flexibility in regard to specific USB ports.

The Logitech Unifying receiver is a small dedicated USB wireless receiver, based on the nRF24L-family of RF devices, that allows up to six compatible Logitech human interface devices to be linked to the same computer using 2.4 GHz band radio communication. Receivers that are bundled with a Logitech product are paired with the device at the factory. When purchasing a replacement receiver or connecting multiple devices to one receiver, pairing requires the free-of-charge Logitech Unifying software, available for Microsoft Windows and Mac OS X. On Linux the Solaar software can be used to adjust the configurations. Although not compatible with Bluetooth, devices pair to Unifying Receivers in a similar way. Peripherals remain paired, and can then be used on systems not supporting the software. Logitech receivers compatible with the Unifying protocol can be identified by the orange Unifying logo, which distinguishes them from Logitech Nano receivers of similar appearance, which pair in a similar manner but only with a single device, without using the Unifying protocol.

<span class="mw-page-title-main">Rackmount KVM</span> Computer front-end hardware in a rack-mounted form factor

A KVM is a computer input/output device offering the combination of a keyboard, video monitor and mouse. They are typically constructed to fit into a 19-inch rack although there are manufacturers who offer a KVM that can be mounted to a flat surface such as a control console.

ATEN International Co.(Ltd) is a Taiwanese multinational manufacturer of connectivity and access management hardware headquartered in Xizhi District, New Taipei, Taiwan. Its products include KVM switches, audiovisual switches and matrices, intelligent power distribution units, information technology management systems, and interface adapters. ATEN has subsidiaries in several countries and is the parent company of IOGEAR.

References

↑ "Edid Handling in Repeater Devices - KVM Splitters, KVM Extenders, etc" . Retrieved 12 August 2015.
↑ "5 Common Applications Of KVM Splitter" . Retrieved 12 August 2015.

External links

Media related to KVM Splitters at Wikimedia Commons

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.

[1] "Edid Handling in Repeater Devices - KVM Splitters, KVM Extenders, etc" . Retrieved 12 August 2015.

[2] "5 Common Applications Of KVM Splitter" . Retrieved 12 August 2015.

[1]

[2]