 | This article relies largely or entirely on a single source .(March 2015) |
| LB&SCR E6 and E6X classes | |||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 32413 at Norwood Junction 1958 | |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
| |||||||||||||||||||||||
The London, Brighton and South Coast Railway E6 Class was a class of 0-6-2T side tank steam locomotive designed by Robert Billinton. They were introduced in 1904 and were a development of the E5 class with smaller driving wheels intended for heavy short and medium-distance freight trains.
The E3 class radial tanks were useful on all but the heaviest freight trains in the congested London area, which required rapid acceleration from signals in order to avoid holding up other traffic. Robert Billinton therefore produced a version of his successful E5 passenger tank class with smaller 4 ft 6 in (1.372 m) driving wheels for this purpose. Twelve locomotives were built by Brighton Works between December 1904 and December 1905. The last two locomotives were originally intended to be built as 0-8-0s for heavy shunting purposes but Billinton died in November 1904 before any were built and the order was subsequently changed by his successor D. E. Marsh.
The E6s were successful goods locomotives, but in 1911 two examples were rebuilt with the larger C3 class boiler and a C2X class smokebox and were re-classified E6X. These two locomotives proved to be very powerful, but used significantly more fuel and no more examples were rebuilt.
All of the class survived the transfer to Southern Railway ownership in 1923, and British Railways ownership in 1948. Withdrawal commenced in September 1957 and was completed by December 1962. No examples have been preserved.
British Railways (BR) numbers were 32407-32418. The E6X locomotives were 32407 and 32411.
 | Wikimedia Commons has media related to LB&SCR E6 class . |
Under the Whyte notation for the classification of locomotives, 4-6-4 represents the wheel arrangement of four leading wheels, six powered and coupled driving wheels and four trailing wheels. In France where the type was first used, it is known as the Baltic while it became known as the Hudson in most of North America.
The London, Brighton and South Coast Railway was a railway company in the United Kingdom from 1846 to 1922. Its territory formed a rough triangle, with London at its apex, practically the whole coastline of Sussex as its base, and a large part of Surrey. It was bounded on its western side by the London and South Western Railway (L&SWR), which provided an alternative route to Portsmouth. On its eastern side the LB&SCR was bounded by the South Eastern Railway (SER)—later one component of the South Eastern and Chatham Railway (SE&CR)—which provided an alternative route to Bexhill, St Leonards-on-Sea, and Hastings. The LB&SCR had the most direct routes from London to the south coast seaside resorts of Brighton, Eastbourne, Worthing, Littlehampton and Bognor Regis, and to the ports of Newhaven and Shoreham-by-Sea. It served the inland towns and cities of Chichester, Horsham, East Grinstead and Lewes, and jointly served Croydon, Tunbridge Wells, Dorking and Guildford. At the London end was a complicated suburban and outer-suburban network of lines emanating from London Bridge and Victoria, and shared interests in two cross-London lines.
Under the Whyte notation for the classification of steam locomotives by wheel arrangement, 4-4-2 represents a configuration of a four-wheeled leading bogie, four powered and coupled driving wheels, and two trailing wheels supporting part of the weight of the boiler and firebox. This allows a larger firebox and boiler than the 4-4-0 configuration.
Under the Whyte notation for the classification of steam locomotives, a 2-6-4 locomotive has two leading wheels, six coupled driving wheels and four trailing wheels. This arrangement is commonly called Adriatic.
Under the Whyte notation for the classification of steam locomotives, 0-6-2 represents the wheel arrangement of no leading wheels, six powered and coupled driving wheels on three axles and two trailing wheels on one axle. The type is sometimes known as a Webb or a Branchliner.
Brighton railway works was one of the earliest railway-owned locomotive repair works, founded in 1840 by the London and Brighton Railway in Brighton, England, and thus pre-dating the more famous railway works at Crewe, Doncaster and Swindon. The works grew steadily between 1841 and 1900 but efficient operation was always hampered by the restricted site, and there were several plans to close it and move the facility elsewhere. Nevertheless, between 1852 and 1957 more than 1200 steam locomotives as well as prototype diesel electric and electric locomotives were constructed there, before the eventual closure of the facility in 1962.
The London, Brighton and South Coast Railway E4 Class is a class of 0-6-2T side tank steam locomotive designed by Robert Billinton. They were introduced in 1897 and were essentially a larger version of the E3 Class. The cylinder diameter was reduced from 18 to 17.5 inches by the Southern Railway.
The London, Brighton and South Coast Railway (LB&SCR) E2 Class was a class of 0-6-0T steam locomotives designed by Lawson Billinton, intended for shunting and short-distance freight trains. Ten examples were built between 1913 and 1916, and all were withdrawn from service and scrapped between 1961 and 1963.
The London, Brighton and South Coast Railway C2 class was a class of 0-6-0 steam locomotives, intended for heavy freight trains. Fifty-five were built by the Vulcan Foundry between 1893 and 1902 to the design of Robert J. Billinton. Forty-five of these were later rebuilt between 1908 and 1940, with a larger boiler as the C2X class.
The B4 class were 4-4-0 steam locomotives for express passenger work on the London, Brighton and South Coast Railway. They were designed by R. J. Billinton and were either built at Brighton works 1899–1902 or else by Messrs Sharp, Stewart and Company in 1901. Twelve members of the class were rebuilt from 1922 to 1924 by L. B. Billinton with a larger boiler, cylinders and a superheater. The rebuilt locomotives were classified B4X.
The London, Brighton and South Coast Railway E3 Class were 0-6-2T side tank steam locomotives. One prototype was designed by William Stroudley shortly before his death, but was completed by R. J. Billinton, who later built sixteen further locomotives.
London Brighton and South Coast Railway Class K were powerful 2-6-0 mixed traffic locomotives designed by L. B. Billinton for the London Brighton and South Coast Railway (LB&SCR) in 1913. They appeared shortly before the First World War and the first ten examples of the class did prodigious work during that conflict on munitions, supply and troop trains. Further examples were built after the war, and the class was used as a test bed for various items of specialised equipment. However, after the formation of the Southern Railway in 1923 the remaining three locomotives on order were not completed and the seventeen members of the class led relatively quiet yet reliable lives over their traditional lines. The locomotives proved their usefulness once again during the Second World War, and continued to provide reliable service until the 1960s. The entire class was eventually withdrawn in 1962 for 'bookkeeping' rather than 'operational' reasons.
Robert John Billinton was the Locomotive, Carriage, Wagon and Marine Superintendent of the London, Brighton and South Coast Railway from 1890 until his death.
Douglas Earle Marsh (1862–1933) was an English railway engineer, and was the Locomotive, Carriage and Wagon Superintendent of the London, Brighton and South Coast Railway from November 1904 until his early retirement on health grounds in July 1911.
The LB&SCR L Class was a class of 4-6-4 steam tank locomotives designed by L. B. Billinton for the London, Brighton and South Coast Railway. They were known as the "Brighton Baltics", Baltic being the European name for the 4-6-4 wheel arrangement. Seven examples were built between April 1914 and April 1922 and they were used for express passenger services.
The LB&SCR D1 class were powerful 0-4-2 suburban passenger tank locomotives, designed by William Stroudley of the London Brighton and South Coast Railway in 1873. They were originally known as "D-tanks" but later reclassified as class D1. Members of this very successful class survived in service until 1951.
The London, Brighton and South Coast Railway (LB&SCR) B2 class was a class of small 4-4-0 steam locomotives intended for express passenger work on the LB&SCR London to Portsmouth line. They were designed by R. J. Billinton and built at Brighton works from 1895 to 1897. They proved to be reliable locomotives but barely adequate for the heaviest trains and acquired the nickname Grasshoppers. As a result the B3 class was developed from the B2, and the B2X class was later rebuilt from these locomotives with larger boilers.
The London, Brighton and South Coast Railway E5 Class was a class of 0-6-2T side tank steam locomotive designed by Robert Billinton. They were introduced in 1902 and were a larger version of the E4 Class intended for semi-fast secondary passenger work.
The London, Brighton and South Coast Railway C3 class was a class of 0-6-0 steam locomotives, intended for heavy freight trains. Ten were built by Brighton railway works in 1906 to the design of Douglas Earle Marsh.
The LB&SCR I3 class was a class of 4-4-2 steam tank locomotives designed by D. E. Marsh for suburban passenger service on the London, Brighton and South Coast Railway.