LBX Company

Last updated
LBX Link-Belt Excavators
Company type Wholly-owned subsidiary
Industry Heavy equipment
Predecessors
  • Link-Belt Machinery Company (1986–1998)
  • Link-Belt Company (1906–1986)
  • Link-Belt Construction Equipment Company (1880–1906)
Founded1880;144 years ago (1880) in Belle Plaine, Iowa, US
Founder William Dana Ewart
Headquarters Lexington, Kentucky, US
Key people
Eric Sauvage (President & CEO)
Parent Sumitomo Heavy Industries
Website en.lbxco.com

LBX (Link-Belt Excavators) is an American industrial company manufacturing excavators, forestry equipment and scrap material handlers. [1]

Contents

Link-Belt is headquartered in Lexington, Kentucky. It is a subsidiary of Japanese conglomerate Sumitomo Heavy Industries.

LBX shares the Link-Belt brand with its sister company, Link-Belt Cranes. The two companies split in 1998. Sumitomo operates them as separate organizations.

History

William (Will) Ewart William Dana Ewart, Iowa Inventor.jpg
William (Will) Ewart
Link-Belt Ad - St. Paul Globe 1891 Note the open hook at the end of each square link, allowing replacement of broken links. Link-Belt Ad - St. Paul Globe 1891.png
Link-Belt Ad - St. Paul Globe 1891 Note the open hook at the end of each square link, allowing replacement of broken links.

Expansion into coal and materials handling

Coaling station constructed by Link-Belt Engineering. New Buffalo, Michigan circa 1891. Link-Belt Built Coaling Station.New Buffalo Michigan.jpg
Coaling station constructed by Link-Belt Engineering. New Buffalo, Michigan circa 1891.

Ewart quickly found customers requesting help engineering and constructing industrial facilities, especially coal-handling systems. During this time, coal fueled almost everything. Railroads especially used huge amounts of coal to power steam engines.

To serve the market, Ewart founded founded two new companies. In 1880, he created Link-Belt Machinery in Chicago, "to design, build, and supply accessory parts, and install elevating and conveying machinery employing Ewart chains." [2]

Then in 1888, he formed Link-Belt Engineering in Philadelphia. This company built a factory in Philadelphia's Nicetown neighborhood.

By 1894, the three companies had constructed facilities for railroads including the New York Central and Hudson, the Philadelphia and Reading, and the Chicago and West Michigan. (See circa 1894 marketing booklet.)

An early rail-chassis Link-Belt crane with clamshell loading bucket for coal handling. Note the large middle structure housing a locomotive-type steam engine. Link-Belt Crane Rail Based Circa 1900.jpg
An early rail-chassis Link-Belt crane with clamshell loading bucket for coal handling. Note the large middle structure housing a locomotive-type steam engine.

During this period, cranes and excavators shared many similarities. Huge steam shovels and steam cranes operated from railroad chassis. Workers laid rail tracks where the shovel was expected to work, then repositioned as required. Link-Belt Machinery quickly developed a steam-powered crane for wide-gauge rails. It used a clamshell-bucket for coal-handling. As shown in the photo at the right, the crane had a large house-like structure mounted on its rail chassis. The middle house-like structure held a steam engine like those used for locomotives.

Through the turn of the century, Link-Belt expanded its line of steam-powered, heavy-duty coal-handling cranes. The company also expanded into lighter, more versatile rail-based cranes.

Link-Belt Chicago Factory Circa 1910 Link-Belt Chicago Factory Circa 1910.webp
Link-Belt Chicago Factory Circa 1910

Move to Chicago and consolidation to single company

By the early 1900s, Link-Belt had moved well beyond its initial drive-chain origins. To support the growth, in 1906 the three Link-Belt companies consolidated into one publicly traded organization: the Link-Belt Company headquartered in Chicago. Charles Piez, who had started at Link-Belt as a Nicetown-based engineer-draftsman, became company president.

1920–1939: Crawler chassis and dragline excavators

The 1900s brought new technologies to cranes and excavators. Continuous-track crawler systems moved the machines off rail platforms, allowing them to move freely. Dragline excavators expanded the power of crane-shovel systems.

By 1922, Link-Belt expanded into the crawler-mounted crane-shovel excavator market. The company continued building rail-based cranes and material-handling equipment, but the rail-based market continued shrinking.

By its 50th anniversary in 1925, Link-Belt operated ten large manufacturing plants and 27 branch offices across the United States. It offered materials-handling products, including locomotive- and crawler-type cranes and excavators. By the 1930s, Link-Belt excavators ranged from 3/4-yd to a 2-1/5-yd capacity.

Link-Belt Speeder Logo Link-Belt Speeder Logo.jpg
Link-Belt Speeder Logo

In 1939, Link-Belt purchased Speeder Machinery, a Cedar Rapids, Iowa-based excavator company. This returned Link-Belt to the Eastern Iowa area where Will Ewart had invented his replaceable-link drive belt. Belle Plaine is 47 miles west of Cedar Rapids.

Speeder Machinery

Cedar Rapids-based Speeder Machinery built crane-shovels. It was an innovator in truck-based excavators, developing the world's first wheel-mounted excavator in 1922. It also built smaller-capacity crane-shovels, down to 3/8-yard.

The merged companies formed the Link-Belt Speeder Corporation as a wholly-owned subsidiary of the Link-Belt Company of Chicago. The new Cedar Rapids location also offered a strong base of crane manufacturing experience, since it was also the home of a large Harnischfeger (P&H) crane factory.

Disruptive innovations: gasoline power and hydraulics

New Link-Belt Speeder Shovel-Crane Plant, opened in 1948, Cedar Rapids, Iowa Link-Belt Speeder Facility 1948, Cedar Rapids, Iowa.png
New Link-Belt Speeder Shovel-Crane Plant, opened in 1948, Cedar Rapids, Iowa

This period (1920–1970) put Link-Belt into business history for managing disruptive innovation. Harvard economist Clayton Christiansen analyzed the mechanical excavator industry to understand why disruptive technology innovations frequently cause well-managed companies to fail. Christiansen tracked excavator companies navigating two key technology changes: moving to gasoline power and switching to hydraulic mechanisms.

1920s: Steam engines to gasoline and diesel power

The technology transition to gasoline power was less disruptive than the one to hydraulic mechanisms. Clayton identified Link-Belt as one of thirty-two steam shovel manufacturers operating in the early 1920s. These companies faced a radical technological change to gasoline power, changing their products' foundations. "Where steam shovels used steam pressure to power a set of steam engines to extend and retract the cables that actuated their buckets, gasoline shovels used a single engine and a very different system of gearing, clutches, drums, and brakes to wind and unwind the cable." [3]

Most of the largest manufacturers survived this transition, making gasoline power more of a "sustaining innovation." Following gasoline power, 1928 and onward included less-radical transitions to diesel engines and electric motors. Clayton also noted the surviving companies integrated new articulated-boom technology, "which allowed longer reach, bigger buckets, and better down-reaching flexibility." [3]

This disruptive period in excavator history set the background for the children's classic Mike Mulligan and His Steam Shovel, based on a machine from Marion Steam Shovel.

Marketing Materials for Link-Belt Speed-o-Matic Hydraulic Controls Link-Belt Speeder Excavator Marketing 1930.webp
Marketing Materials for Link-Belt Speed-o-Matic Hydraulic Controls

1936–1970: Hydraulics innovation leading to market leadership

Early adoption of hydraulics (1936 onward)

Clayton found Link-Belt was part of a much smaller group surviving the transition to hydraulics. Before hydraulic technology, cranes and crane-excavators used cable actuators to control movements. Operators would stand all day at the crane controls, pulling large levers to engage the cables. This was difficult, tiring work. The cables were also dangerous when they snapped.

Second Link-Belt Speeder Crane Excavator Factory in Cedar Rapids, Iowa, Completed 1967 Second Link-Belt Speeder Crane Excavator Factory in Cedar Rapids, Iowa, Completed 1967.jpg
Second Link-Belt Speeder Crane Excavator Factory in Cedar Rapids, Iowa, Completed 1967

Hydraulic systems allowed the operator to sit and operate "fingertip" controls. This made the work less tiring and safer.

Link-Belt adopted the new technology early. It began the switch in 1936, before the 1939 Speeder acquisition. The company later branded its hydraulic controls as "Speed-o-Matic."

1950–1970: Market shakeout from disruptive hydraulic technology

Hydraulic innovators like Link-Belt drove a market shakeup. Clayton identifies Link-Belt as one of about 30 established cable-actuated excavator companies of the 1950s. By 1970, only four of these companies had survived by transitioning to hydraulics. These four were Link-Belt, Insley, Koehring, and Little Giant. [3]

A few other companies survived by shifting to the upper end of the market, producing dragline excavators for strip mining. [3] This included former market leader Marion Steam Shovel. which changed to Marion Power Shovel and focused on dragline systems including ones that helped dig the Panama Canal.

New major competitors, domestic and international

Link-Belt faced strong new competition from other hydraulic innovators, which Clayton identifies as Case, John Deere, Drott, Ford, Bamford (JCB), Poclain, International Harvester, Caterpillar, O & K, Demag, Liebherr, Komatsu, and Hitachi. [3]

A number of these entrants came to excavators through the invention of the backhoe. These small-capacity excavators were initially mounted on the back of tractors, either farm or industrial varieties. This opened the excavator market to general contractors. [3]

Link-Belt Speeder succeeded in competing against the new entrants, making the company a showcase for managing disruptive innovation. Link-Belt Speeder's rapid adoption of the new hydraulic technologies let it survive where most other established companies failed.

Toy version of Link-Belt LS-98 excavator. The LS-98 crane and crane-excavator continued in production for 42 years (1954 to 1996). Link-Belt LS-98.jpg
Toy version of Link-Belt LS-98 excavator. The LS-98 crane and crane-excavator continued in production for 42 years (1954 to 1996).

Worldwide market leadership and LS-98

This early adoption of hydraulics launched Link-Belt Speeder to the forefront of the crane and crane-shovel excavator markets worldwide. The 1954 flagship model LS-98 platform offers a key example. The LS-98 is one of the most successful pieces of construction equipment ever built. Production of these cranes and crane-excavators continued for over 42 years (1954 to 1996). Link-Belt built over 7,000 units and LS-98 units are still operating around the world.

Link-Belt Speeder faced growing competition from Japanese manufacturers. Japanese labor was cheaper than America's. To address this and expand sales in Asia, Link-Belt Speeder established an agreement with Japan's Sumitomo Heavy Industries. Sumitomo began manufacturing Link-Belt products under license, selling them in Asia. Link-Belt also began contracting with Sumitomo to build parts and models for sale in the USA.

FMC Link-Belt Excavator, 1960 Link-Belt Excavator 1980.webp
FMC Link-Belt Excavator, 1960

In 1965, FMC Corporation purchased Link-Belt Speeder as a subsidiary, [4] later making it the FMC Construction Equipment Group. It dropped the Speeder name and branded products as FMC Link-Belt.

Long-term capital expansion

FMC began an aggressive long-term capital expansion plan for Link-Belt's manufacturing facilities and product lines. For example, FMC tried to leverage Link-Belt's expertise into its fire truck division. Working with Ladder Towers Inc. (LTI), FMC Link-Belt developed aerial ladder trucks. This venture was unsuccessful and shut down in 1990. [5]

1979 peak in US-based production

By 1979, FMC Link-Belt reached its American production peak. For example, the two Cedar Rapids factories employed 2,300 workers. Sumitomo also sold many Japanese-built, Link-Belt branded models of cranes and excavators.

Early 1980s recession and consolidation to Lexington

FMC's expansion of Link-Belt ended with the early 1980s recession. Worldwide inflation combined with a double-dip recession dramatically reduced the need for new construction equipment. With the prime interest rate peaking at 22%, businesses cut construction plans and FMC began layoffs. The United States had reached its peak industrialization and would never again reach 1979 levels.

In an effort to save the older Cedar Rapids plants, FMC reorganized the construction group. It merged control of the Cedar Rapids plants with its Kentucky facilities. The American recession ended by 1983, but worldwide demand continued to be slow and cutbacks continued into 1984. From its 1979 peak of 2,300 workers in two Cedar Rapids plants, FMC Link-Belt reduced to only 450 Iowa employees by 1985.

Across the FMC Link-Belt factories, utilization remained low at 25%. In February 1985, FMC announced the closure of both Cedar Rapids plants. FMC consolidated Link-Belt operations to the newer Kentucky plants in Lexington and Bowling Green. A third plant in Milan, Italy also remained open. In Cedar Rapids, FMC laid off the remaining 380 Cedar Rapids factory workers, leaving 70 engineers and marketing employees in Iowa.

As the consolidation later continued, the remaining Cedar Rapids workers were laid off. The Bowling Green factory also shut down. All American Link-Belt operations moved to Lexington.

LBX Link-Belt Excavator Faciliity, 2000 LBX Headquarters, 2000.webp
LBX Link-Belt Excavator Faciliity, 2000

By 1986, FMC still struggled recovering from the recession. As American deindustrialization continued, FMC turned to long-time Japanese partner Sumitomo Heavy Industries. In 1986, FMC and Sumitomo expanded their relationship by forming a joint venture (JV) named Link-Belt Construction Equipment Company.

By the late 1990s, excavators had developed past crane-shovels and become the modern hydraulic machines of today. Even the legendary Link-Belt LS-98 ceased production in 1996. This mostly eliminated the economy of scale between crane and excavator manufacture.

To address this, in 1998 the FMC/Sumitomo JV spun off excavator products to a new JV with Case Corporation. The excavator company became LBX LLC, building and selling Link-Belt branded excavators.

Sumitomo later acquired full ownership of both joint ventures. It now operates LBX Excavators separately from Link-Belt Cranes.

See also

Related Research Articles

<span class="mw-page-title-main">Excavator</span> Type of construction equipment

Excavators are heavy construction equipment primarily consisting of a boom, dipper, bucket and cab on a rotating platform known as the "house" - although the largest form ever, the dragline excavator, eliminated the dipper in favor of a line and winch.

<span class="mw-page-title-main">Heavy equipment</span> Vehicles designed for executing construction tasks

Heavy equipment, heavy machinery, earthmovers, construction vehicles, or construction equipment, refers to heavy-duty vehicles specially designed to execute construction tasks, most frequently involving earthwork operations or other large construction tasks. Heavy equipment usually comprises five equipment systems: the implement, traction, structure, power train, and control/information.

<span class="mw-page-title-main">Dragline excavator</span> Piece of heavy equipment used in civil engineering and surface mining

A dragline excavator is a heavy-duty excavator used in civil engineering and surface mining. It was invented in 1904, and presented an immediate challenge to the steam shovel and its diesel and electric powered descendant, the power shovel. Much more efficient than even the largest of the latter, it enjoyed a heyday in extreme size for most of the 20th century, first becoming challenged by more efficient rotary excavators in the 1950s, then superseded by them on the upper end from the 1970s on.

<span class="mw-page-title-main">Steam shovel</span> Steam-powered excavation machine

A steam shovel is a large steam-powered excavating machine designed for lifting and moving material such as rock and soil. It is the earliest type of power shovel or excavator. Steam shovels played a major role in public works in the 19th and early 20th century, being key to the construction of railroads and the Panama Canal. The development of simpler, cheaper diesel, gasoline and electric shovels caused steam shovels to fall out of favor in the 1930s.

Edward Huber was an American inventor and industrialist.

<span class="mw-page-title-main">Marion Power Shovel Company</span> American construction and mining equipment firm

Marion Power Shovel Company was an American firm that designed, manufactured and sold steam shovels, power shovels, blast hole drills, excavators, and dragline excavators for use in the construction and mining industries. The company was a major supplier of steam shovels for the construction of the Panama Canal. The company also built the two crawler-transporters used by NASA for transporting the Saturn V rocket and later the Space Shuttle to their launch pads. The company's shovels played a major role in excavation for Hoover Dam, the Holland Tunnel and the extension of the Number 7 subway line to Main Street in Flushing, Queens.

Big Muskie Former dragline excavator

Big Muskie was a dragline excavator built by Bucyrus-Erie and owned by the Central Ohio Coal Company, weighing 13,500 short tons (12,200 t) and standing nearly 22 stories tall. It mined coal in the U.S. state of Ohio from 1969 to 1991. It was dismantled and sold for scrap in 1999.

<span class="mw-page-title-main">FMC Corporation</span> American chemical manufacturing company

FMC Corporation is an American chemical manufacturing company headquartered in Philadelphia, Pennsylvania, which originated as an insecticide producer in 1883 and later diversified into other industries. In 1941 at the beginning of US involvement in WWII, the company received a contract to design and build amphibious tracked landing vehicles for the United States Department of War, and afterwards the company continued to diversify its products. FMC employs 7,000 people worldwide, and had gross revenues of US$4.7 billion in 2018.

<span class="mw-page-title-main">Pile driver</span> Heavy equipment

A pile driver is a heavy-duty tool used to drive piles into soil to build piers, bridges, cofferdams, and other "pole" supported structures, and patterns of pilings as part of permanent deep foundations for buildings or other structures. Pilings may be made of wood, solid steel, or tubular steel, and may be driven entirely underwater/underground, or remain partially aboveground as elements of a finished structure.

<span class="mw-page-title-main">Bucyrus-Erie</span> Defunct American mining equipment company

Bucyrus-Erie was an American surface and underground mining equipment company. It was founded as Bucyrus Foundry and Manufacturing Company in Bucyrus, Ohio, in 1880. Bucyrus moved its headquarters to South Milwaukee, Wisconsin, in 1893. In 1927, Bucyrus merged with the Erie Steam Shovel Company to form Bucyrus-Erie. In 1997, it was renamed Bucyrus International, Inc. In 2010 the enterprise was purchased by Caterpillar in a US$7.6 billion transaction that closed on July 8, 2011. At the time of its acquisition, the Bucyrus product line included a range of material removal and material handling products used in both surface and underground mining.

<span class="mw-page-title-main">Power shovel</span> Bucket-equipped machine used for digging and loading earth

A power shovel, also known as a motor shovel, stripping shovel, front shovel, mining shovel or rope shovel, is a bucket-equipped machine usually powered by steam, diesel fuel, gasoline or electricity and used for digging and loading earth or fragmented rock and for mineral extraction. Power shovels are a type of rope/cable excavator, where the digging arm is controlled and powered by winches and steel ropes, rather than hydraulics like in the modern hydraulic excavators. Basic parts of a power shovel include the track system, cabin, cables, rack, stick, boom foot-pin, saddle block, boom, boom point sheaves and bucket. The size of bucket varies from 0.73 to 53 cubic meters.

<span class="mw-page-title-main">Euclid Trucks</span> Former American heavy equipment manufacturer

The Euclid Company of Ohio was a manufacturer which specialized in heavy equipment for earthmoving, particularly dump trucks, loaders and wheel tractor-scrapers. It operated in the US from the 1920s to the 1950s, when it was purchased by General Motors. The firm was later bought by Hitachi Construction Machinery.

<span class="mw-page-title-main">Ruston-Bucyrus</span>

Ruston-Bucyrus Ltd was an engineering company established in 1930 and jointly owned by Ruston & Hornsby based in Lincoln, England, and Bucyrus-Erie based in South Milwaukee, Wisconsin, the latter of which had operational control and into which the excavator manufacturing operation of Ruston & Hornsby was transferred. The Bucyrus company proper, from which the Bucyrus component of the Ruston-Bucyrus name was created, was an American company founded in 1880, in Bucyrus, Ohio.

<span class="mw-page-title-main">JBT Corporation</span> American food processing machinery and automated vehicle company

JBT Corporation, or John Bean Technologies Corporation, is a food processing machinery and automated vehicle company. JBT Corporation was incorporated in 2008 when FMC Technologies divested its non-energy businesses. JBT Corporation is based in Chicago, Illinois. The company traces its history back to a company founded in 1884 by John Bean, an orchardist in Los Gatos, California.

Marion 6360, also known as The Captain, was a giant power shovel built by the Marion Power Shovel company. Completed and commissioned on October 15 1965, it was one of the largest land vehicles ever built, exceeded only by some dragline and bucket-wheel excavators. The shovel originally started work with Southwestern Illinois Coal Corporation, but the owners were soon bought out by Arch Coal. Everything remained the same at the mine except for the colors which were changed to red, white, and blue. Like most mining vehicles of extreme size, Marion 6360 only required a surprisingly small amount of men to operate, a total of four consisting of a operator, oiler, welder, and a ground man who looked after the trailing cable.

<span class="mw-page-title-main">P&H Mining</span>

P&H Mining Equipment sells drilling and material handling machinery under the "P&H" trademark. The firm is an operating subsidiary of Joy Global Inc. In 2017 Joy Global Inc. was acquired by Komatsu Limited of Tokyo, Japan, and is now known as Komatsu Mining Corporation and operates as a subsidiary of Komatsu.

<span class="mw-page-title-main">Joy Global</span>

Joy Global Inc. was a company that manufactured and serviced heavy equipment used in the extraction and haulage of coal and minerals in both underground and surface mining. The company had manufacturing facilities in Alabama, Pennsylvania, Texas, Wisconsin, Australia, Canada, China, France, South Africa, Poland and the United Kingdom. In 2017, Joy Global was acquired by Komatsu Limited and was renamed Komatsu Mining Corp.

<span class="mw-page-title-main">Link-Belt Cranes</span> American company

Link-Belt Cranes is an American industrial company that develops and manufactures heavy construction equipment, specializing in telescopic and lattice boom cranes. Link-Belt is headquartered in Lexington, Kentucky, and is a subsidiary of the Japanese conglomerate, Sumitomo Heavy Industries.

William Dana Ewart invented and patented the linked belt, a square detachable link for chain belts, on September 1, 1874. The metal chain "linked belt" replaced the leather and strap belts used on agricultural equipment at the time.

<span class="mw-page-title-main">Crawler excavator</span> Type of heavy construction equipment

A crawler excavator, also known as a track-type excavator or tracked excavator, is a type of heavy construction equipment primarily used for excavation and earthmoving tasks. It is characterized by its tracked undercarriage, which provides superior mobility and traction compared to wheeled excavators, especially in soft, uneven, or unstable terrain..

References

  1. "ABOUT ~ Link-Belt Excavators" . Retrieved 2024-07-17.
  2. Link-Belt 1875-1925. Cedar Rapids, Iowa: Link-Belt Company. 1875.
  3. 1 2 3 4 5 6 Christiansen, Clayton (2015). The Innovator's Dilemma. Harvard Business Review Press. pp. Chapter 3.
  4. "Site Description". EPA.
  5. Google Books.