LCD manufacturing

Last updated

LCD manufacturing is the process of making liquid crystal display (LCD) panels. It involves using glass and silicon substrates. Photolithography is used to pattern the substrates, and liquid crystal materials are added. In the case of a color TFT LCD, color filters are patterned in layers to make red, green, and blue pixels.

Contents

Liquid crystal displays are manufactured in cleanrooms, borrowing techniques from semiconductor device manufacturing.

Process

A class of photolithography known as display lithography is used to etch patterns into substrates.

LCD manufacturing shares some of the process with OLED manufacturing.

The process flow involves multiple separate components that are joined together: a process for making a thin-film transistor (TFT) backplane, a process for making color filters, and a liquid crystal cell process. [1]

Large-scale chemical vapor deposition (CVD) systems have been used in the manufacture of LCDs. [2]

Once LCD panels are manufactured, they can be measured for color quality and panel uniformity using characterization equipment. [3]

TFT backplane process

TFT backplanes are made using photolithography techniques, which involve using photomasks. [1] The photomask(s) are used to create TFTs on a substrate, which involves formation of a gate layer, source/drain layer formation, and contact-hole formation. [1]

The TFT backplane process involves patterning of indium tin oxide (ITO), which is a transparent and electrically conductive material. [1]

Conventional LCDs use a back-channel etched (BCE) TFT display pixel structure. [1]

Liquid crystal cell process

The cell process involves layer alignment, sealant formation, and depositing liquid crystal. The panels are then bonded and cut into individual displays. [1]

A technique that can be used is one drop fill (ODF). [1] [4]

UV photocuring equipment can be used for bonding LCD panels. [4]

Modules

An LCD module (LCM) is a ready-to-use LCD with a backlight. Thus, a factory that makes LCD modules does not necessarily make LCDs, it may only assemble them into the modules.

An LCD panel is attached to a driver board using anisotropic conductive film.

Generations

LCD-Glass-sizes-generation LCD-Glass-sizes-generation.svg
LCD-Glass-sizes-generation

LCDs are manufactured using large sheets of glass whose size has increased over time. Several displays are manufactured at the same time, and then cut from the sheet of glass, also known as the mother glass or LCD glass substrate. The increase in size allows more displays or larger displays to be made, just like with increasing wafer sizes in semiconductor manufacturing. The glass sizes are as follows:

GenerationLength
(mm)		Height
(mm)		Year of
introduction		References
GEN 1200–300200–4001990 [5] [6]
GEN 2370470
GEN 35506501996–1998 [7]
GEN 3.56007201996 [6] [8]
GEN 46808802000–2002 [6] [7]
GEN 4.57309202000–2004 [9]
GEN 511001250–13002002–2004 [6] [7]
GEN 5.513001500
GEN 615001800–18502002–2004 [6] [7]
GEN 7187022002003 [10] [11]
GEN 7.519502250 [6]
GEN 821602460 [11]
GEN 8.5 [a] 220025002007–2016 [12]
GEN 8.6225026002016 [12]
GEN 8.7 [b] 229026202026 [13]
GEN 10288031302009 [14]
GEN 10.5 [c] 294033702018 [15] [16]
  1. ↑ Sometimes wrongfully referred to as GEN 8.
  2. ↑ Sometimes wrongfully referred to as GEN 8.6.
  3. ↑ Also known as GEN 11.

In 2004, Sharp started manufacturing panels using the 6th-generation glass size, which is 1.8 meters by 1.5 meters. [2]

Until Gen 8, manufacturers would not agree on a single mother glass size and as a result, different manufacturers would use slightly different glass sizes for the same generation. Some manufacturers have adopted Gen 8.6 mother glass sheets which are only slightly larger than Gen 8.5, allowing for more 50- and 58-inch LCDs to be made per mother glass, specially 58-inch LCDs, in which case 6 can be produced on a Gen 8.6 mother glass vs only 3 on a Gen 8.5 mother glass, significantly reducing waste. [12] The thickness of the mother glass also increases with each generation, so larger mother glass sizes are better suited for larger displays.

Companies

Companies that have made or sold LCD panels include:

Companies that have produced FPD lithography equipment include Canon and Nikon. [17]

LCD glass substrates are made by companies such as AGC Inc., Corning Inc., and Nippon Electric Glass.

Display lithography equipment include the H803T and H1003T from Canon. [18] Display Technologies, Inc. is a defunct joint venture that manufactured LCD panels.

Materials

Optically clear adhesives are used to bond display components in the manufacturing process. [19]

See also

Related Research Articles

<span class="mw-page-title-main">Liquid-crystal display</span> Display that uses the light-modulating properties of liquid crystals

A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers to display information. Liquid crystals do not emit light directly but instead use a backlight or reflector to produce images in color or monochrome.

Photolithography is a process used in the manufacturing of integrated circuits. It involves using light to transfer a pattern onto a substrate, typically a silicon wafer.

A thin-film transistor (TFT) is a special type of field-effect transistor (FET) where the transistor is made by thin film deposition. TFTs are grown on a supporting substrate, such as glass. This differs from the conventional bulk metal-oxide-semiconductor field-effect transistor (MOSFET), where the semiconductor material typically is the substrate, such as a silicon wafer. The traditional application of TFTs is in TFT liquid-crystal displays.

<span class="mw-page-title-main">Flat-panel display</span> Electronic display technology

A flat-panel display (FPD) is an electronic display used to display visual content such as text or images. It is present in consumer, medical, transportation, and industrial equipment.

<span class="mw-page-title-main">Television set</span> Device for viewing computers screen and shows broadcast through satellites or cables

A television set or television receiver is an electronic device for viewing and hearing television broadcasts, or as a computer monitor. It combines a tuner, display, and loudspeakers. Introduced in the late 1920s in mechanical form, television sets became a popular consumer product after World War II in electronic form, using cathode-ray tube (CRT) technology. The addition of color to broadcast television after 1953 further increased the popularity of television sets in the 1960s, and an outdoor antenna became a common feature of suburban homes. The ubiquitous television set became the display device for the first recorded media for consumer use in the 1970s, such as Betamax, VHS; these were later succeeded by DVD. It has been used as a display device since the first generation of home computers and dedicated video game consoles in the 1980s. By the early 2010s, flat-panel television incorporating liquid-crystal display (LCD) technology, especially LED-backlit LCD technology, largely replaced CRT and other display technologies. Modern flat-panel TVs are typically capable of high-definition display and can also play content from a USB device. In the late 2010s, most flat-panel TVs began offering 4K and 8K resolutions.

<span class="mw-page-title-main">Field-emission display</span>

A field-emission display (FED) is a flat panel display technology that uses large-area field electron emission sources to provide electrons that strike colored phosphor to produce a color image. In a general sense, an FED consists of a matrix of cathode-ray tubes, each tube producing a single sub-pixel, grouped in threes to form red-green-blue (RGB) pixels. FEDs combine the advantages of CRTs, namely their high contrast levels and very fast response times, with the packaging advantages of LCD and other flat-panel technologies. They also offer the possibility of requiring less power, about half that of an LCD system. FEDs can also be made transparent.

A thin-film-transistor liquid-crystal display is a type of liquid-crystal display that uses thin-film-transistor technology to improve image qualities such as addressability and contrast. A TFT LCD is an active matrix LCD, in contrast to passive matrix LCDs or simple, direct-driven LCDs with a few segments.

Masklesslithography (MPL) is a photomask-less photolithography-like technology used to project or focal-spot write the image pattern onto a chemical resist-coated substrate by means of UV radiation or electron beam.

LG Display Co., Ltd. is one of the world's largest manufacturers and supplier of thin-film transistor liquid crystal display (TFT-LCD) panels, OLEDs and flexible displays. LG Display is headquartered in Seoul, South Korea, and currently operates nine fabrication facilities and seven back-end assembly facilities in South Korea, China, Poland and Mexico.

<span class="mw-page-title-main">Large-screen television technology</span> Technology rapidly developed in the late 1990s and 2000s

Large-screen television technology developed rapidly in the late 1990s and 2000s. Prior to the development of thin-screen technologies, rear-projection television was standard for larger displays, and jumbotron, a non-projection video display technology, was used at stadiums and concerts. Various thin-screen technologies are being developed, but only liquid crystal display (LCD), plasma display (PDP) and Digital Light Processing (DLP) have been publicly released. Recent technologies like organic light-emitting diode (OLED) as well as not-yet-released technologies like surface-conduction electron-emitter display (SED) or field-emission display (FED) are in development to supersede earlier flat-screen technologies in picture quality.

Indium gallium zinc oxide (IGZO) is a semiconducting material, consisting of indium (In), gallium (Ga), zinc (Zn) and oxygen (O). IGZO thin-film transistors (TFT) are used in the TFT backplane of flat-panel displays (FPDs). IGZO-TFT was developed by Hideo Hosono's group at Tokyo Institute of Technology and Japan Science and Technology Agency (JST) in 2003 and in 2004. IGZO-TFT has 20–50 times the electron mobility of amorphous silicon, which has often been used in liquid-crystal displays (LCDs) and e-papers. As a result, IGZO-TFT can improve the speed, resolution and size of flat-panel displays. It is currently used as the thin-film transistors for use in organic light-emitting diode (OLED) TV displays.

<span class="mw-page-title-main">AMOLED</span> Display technology for use in mobile devices and televisions

AMOLED is a type of OLED display device technology. OLED describes a specific type of thin-film-display technology in which organic compounds form the electroluminescent material, and active matrix refers to the technology behind the addressing of pixels.

IPS is a screen technology for liquid-crystal displays (LCDs). In IPS, a layer of liquid crystals is sandwiched between two glass surfaces. The liquid crystal molecules are aligned parallel to those surfaces in predetermined directions (in-plane). The molecules are reoriented by an applied electric field, while remaining essentially parallel to the surfaces to produce an image. It was designed to solve the strong viewing angle dependence and low-quality color reproduction of the twisted nematic field effect (TN) matrix LCDs prevalent in the late 1980s.

Liquid optically-clear adhesive (LOCA) is liquid-based bonding technology used in touch panels and display devices to bind the cover lens, plastic, or other optical materials to the main sensor unit or each other. These adhesives improve optical characteristics and durability. LOCA glue is often hardened using ultraviolet light.

<span class="mw-page-title-main">Universal Display Corporation</span> Developer and manufacturer of OLED technologies

Universal Display Corporation is a developer and manufacturer of organic light emitting diode (OLED) technologies and materials, and it is a provider of services to the display and lighting industries.

One Glass Solution (OGS) is a touchscreen technology which reduces the thickness of a display by removing one of the layers of glass from the traditional capacitive touchscreen stack. The basic idea is to replace the touch module glass with a thin layer of insulating material. In general, there are two ways to achieve this.

Low-temperature polycrystalline silicon (LTPS) is polycrystalline silicon that has been synthesized at relatively low temperatures. LTPS is important for display industries, since the use of large glass panels prohibits exposure to deformative high temperatures. More specifically, the use of polycrystalline silicon in thin-film transistors (LTPS-TFT) has high potential for large-scale production of electronic devices like flat panel LCD displays or image sensors.

Three-dimensional (3D) microfabrication refers to manufacturing techniques that involve the layering of materials to produce a three-dimensional structure at a microscopic scale. These structures are usually on the scale of micrometers and are popular in microelectronics and microelectromechanical systems.

<span class="mw-page-title-main">Amorphous silicon</span> Non-crystalline silicon

Amorphous silicon (a-Si) is the non-crystalline form of silicon used for solar cells and thin-film transistors in LCDs.

References

  1. 1 2 3 4 5 6 7 "LCD manufacturing flow".
  2. 1 2 3 Kawamoto, Hirohisa (2013-03-28). The history of liquid-crystal display and its industry. pp. 1–6. doi:10.1109/HISTELCON.2012.6487587. ISBN   978-1-4673-3079-4 . Retrieved 2025-01-06.{{cite book}}: |website= ignored (help)
  3. ↑ "Display Characterization".
  4. 1 2 "Liquid crystal display manufacturing process innovation 1: One drop fill (ODF)".
  5. ↑ "Sunic system". sunic.co.kr. Archived from the original on March 8, 2021. Retrieved December 22, 2019.
  6. 1 2 3 4 5 6 "Size Matters". AU Optronics Corp. (AUO). January 19, 2017. Archived from the original on August 24, 2017.
  7. 1 2 3 4 Gan, Fuxi (2003-07-16). From optical glass to photonic glass. International Symposium on Photonic Glass (ISPG 2002). p. 1. doi:10.1117/12.517223.
  8. ↑ "Rudolph's JetStep Lithography System Maximizes Throughput while Addressing the Specific Challenges of Advanced Packaging Applications" (PDF). Retrieved 2025-01-05.
  9. ↑ Armorex Taiwan Central Glass Company Archived February 24, 2021, at the Wayback Machine , Retrieved May 20, 2015.
  10. ↑ Samsung: SAMSUNG Electronics Announces 7th-Generation TFT LCD Glass Substrate Archived April 4, 2021, at the Wayback Machine , Press release March 27, 2003, Visited August 2, 2010.
  11. 1 2 "Large Generation Glass". Archived from the original on August 23, 2011. Retrieved April 4, 2019.
  12. 1 2 3 "8.6G Fabs, Do We Really Need Them? - Display Supply Chain Consultants". March 7, 2017. Archived from the original on March 7, 2017. Retrieved July 3, 2023.
  13. ↑ Ross, Young (4 December 2023). "BOE Formally Announces B16 G8.7 IT OLED Fab". DSCC. Retrieved 14 June 2024.
  14. ↑ "Company History - Sakai Display Products Corporation". SDP.co.jp. Archived from the original on March 8, 2021. Retrieved April 10, 2019.
  15. ↑ "BOE's Gen 10.5 Display Equipment Is a Pie in the Sky for Korean Equipment Companies". ETNews. July 10, 2015. Archived from the original on March 25, 2021.
  16. ↑ Shih, Willy. "How Did They Make My Big-Screen TV? A Peek Inside China's Massive BOE Gen 10.5 Factory". Forbes. Archived from the original on March 7, 2021. Retrieved April 10, 2019.
  17. ↑ "Global Flat Panel Display (FPD) Lithography Equipment Market Insights and Forecast".
  18. ↑ "FPD Lithography Equipment for Large Panels | Canon Video Square".
  19. ↑ Blankenbach, Karlheinz; Yan, Qun; O'Brien, Robert J., eds. (2025). Handbook of Visual Display Technology. Springer. doi:10.1007/978-3-642-35947-7. ISBN   978-3-642-35947-7.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.