The Model 35 was adopted by the Italian Army in 1935. Units were assigned to a "Flamethrower platoon". Each of three squads, which consisted of six sections, were assigned two weapons.[1] In 1939, 176 copies of this model were sold to the Finnish Army, who used the renamed Lanciafiamme M/40 against the Red Army during the Winter War. During the Second World War, the Model 35 was issued to a division on the Greek-Albanian front. The newer Model 40, which replaced the Model 35 as the Italian Army's principal flamethrower in 1940, was issued mostly to the Italian corps.[1] The Model 40 was employed largely in the North African campaign against the British and with Italian units in Russia.
The Model 35 was heavier than its contemporaries and had inferior performance to those weapons, having a shorter range than the equivalent German weapon.
Model 35
Italian soldiers armed with the Flamethrower Model 35 on parade. The quadrangular box structure contains the batteries of the ignition system.
The Model 35 had three major elements: the tank, the lance and the ignition system.
The tank was carried via two transport belts and padded back. It was composed of two cylinders. Each was divided internally into two parts by a metal diaphragm. The two upper sections were linked together and could hold 6 litres of nitrogen at a pressure of 20 atmospheres, which acted as a propellant. The lower halves were also connected and contained 12 litres of fuel, a mixture composed of 9 parts diesel oil and 1 part gasoline.[1] Both substances were loaded from special openings on the upper end of the cylinders, where a manual valve conveyed the liquid nitrogen in the tank to pressurize them at the moment of use. The filler pipe coupling of the lance was located in the lower part of the tank, beside the right cylinder.
The lance has a control lever (of lightweight alloy) that connects to the tank through a hose. At the muzzle of the lance, a large flange ("cartoccia") has a double ignition system. The main system was initially made of two sharpening sheets of steel, with flint and rollers to create sparks from friction, actuated by the control lever. It was later replaced by an electrical system: a square box, placed behind the cylinders housed an 18 volt battery with a dynamo for manual recharging. Two electric cables run up the lance to the flange, each serving as a spark plug similar to that of a car. The spark ignited the jet of gas that poured from the lance. A secondary system consists of the "bengalotto," a slow-burning pyrotechnic device that is manually ignited and mounted on the weapons sight, burning for 2 minutes. On the passage of the flammable liquid, operated by the lever on the lance, it launched a dart of up to 20 meters range, which produced a heat zone 35 meters wide and 15 deep.[1] The "bengalotto," however, though simple and reliable, was prone to revealing the user's position to enemy forces.
The weapon was carried by two soldiers, flammieri, protected by fireproof vests. The system, due to its weight and the overall dimensions of the fireproof suit, could be carried only for short distances. It was normally transported on trucks or on special donkey saddle. The flammable liquid reserves allowed about 20 discharges. Recharging the weapon could take 20 minutes or more.[1]
A Model 40, distinguishable from its predecessor by the cylindrical turbine container.Model42 carrellato
Model 40
The Model 40 carried an improved electrical ignition system, based on a high-voltage magneto. This was activated by a turbine flow, set in motion by the pressurized flow of the liquid fuel at the time of launch. The electrical connection fed the spark plug and ignited the jet. The flange still retained the bengalotto tube as a secondary ignition system. Otherwise, major components of the weapon and its performance remained unchanged.
Further development
The excessive weight of the system on the battlefield led to the development of the Lanciafiamme Mod. 41[it], which was lighter, with a slightly modified electrical system. For shock troops and paratroopers, a lighter version that could be held as a rifle was developed, called the Lanciafiamme Mod. 41 d'assalto. The Italian armed forces also used the Lanciafiamme Carrellato Model 42,[1] a heavy model intended for engineers rather than assault troops.
↑ Official denomination taken from Istruzione per l'addestramento e l'impiego di unità lanciafiamme, Direzione del Servizio Chimico Militare, Ministero della Guerra, 1943.
1 2 3 4 5 6 Nicola, Pignato (1971). Le armi della fanteria italiana nella seconda guerra mondiale. Italy: Ermanno Albertelli Editore. p.68. OCLC797573113.
Bibliography
Le armi della fanteria italiana nella seconda guerra mondiale, Nicola Pignato, Albertelli Ed., 1978.
A flamethrower is a ranged incendiary device designed to project a controllable jet of fire. First deployed by the Byzantine Empire in the 7th century AD, flamethrowers saw use in modern times during World War I, and more widely in World War II as a tactical weapon against fortifications.
The Fucile Mitragliatore Breda modello 30 was the standard light machine gun of the Royal Italian Army during World War II. The Breda Modello 30 was issued at platoon level and gave Italian rifle squads extra firepower. As a light machine gun it had many problems including jamming and overheating. It was fed by a 20 round stripper clips which had to be oiled by a lubrication device. Despite all its faults it formed the main base of fire for infantry units during the war.
The Type 93 and Type 100 flamethrowers were flamethrowers used by the Imperial Japanese Army and Imperial Japanese Navy's SNLF during the Second Sino-Japanese War and World War II.
The Solothurn S18-1000 20 mm was a Swiss anti-tank rifle used during the Second World War. It was a variant of the earlier S-18/100 with modifications for a higher muzzle velocity, as well as a larger cartridge size. The more powerful ammunition resulted in significant recoil, which was problematic for the gunner, and its size made portability difficult.
The Cannone da 90/53 was an Italian-designed cannon used both in an anti-aircraft role and as an anti-tank gun during World War II. It was one of the most successful anti-aircraft guns to see service during the conflict. The naval version of the gun was mounted on Italian battleships of the Littorio-class and the Andrea Doria-class.
The Type I rifle was produced during the early years of World War II for the Japanese Empire by the Kingdom of Italy.
The first German man-portable flamethrower was called the Kleinflammenwerfer or Kleif. Fuel was stored in a large vertical, cylindrical backpack container. High-pressure propellant was stored in another, smaller container attached to the fuel tank. A long hose connected the fuel tank to a lance tube with an igniting device at the nozzle. The propellant forced the fuel through the hose and out of the nozzle at high speed when a valve was opened. The igniting device at the nozzle set fire to the fuel as it sprayed out. The flamethrower was operated by two soldiers, one carrying the fuel and propellant tanks, another wielding the lance. Wex, a replacement for the Kleif, was introduced in 1917 after the third battle of Ypres.
The Mitragliatrice Breda calibro 8 modello 37 was an Italian Medium machine gun produced by Breda and adopted in 1937 by the Royal Italian Army. It was the standard heavy machine gun for the Royal Italian Army during World War II, and continued to be used by the Italian Army after the conflict.
The Breda 20/65 mod.35, also simply known as 20 mm Breda or Breda Model 35, among other variations, was an Italian 20 mm (0.787 in) anti-aircraft gun produced by the Società Italiana Ernesto Breda of Brescia company during the 1930s and early 1940s which saw heavy usage during the Spanish Civil War and World War II, among other period conflicts. It was designed in 1932 and adopted by the Italian armed forces in 1935, becoming one of two major 20 mm caliber anti-aircraft guns used by Italy during World War II, the other being the Scotti-Isotta Fraschini 20/70, both firing the common Swiss 20x138mmB "Solothurn Long" cartridge.
The Mitragliatrice Breda calibro 8 modello 38 per carri armati was an Italian tank-pattern machine gun used in the Second World War on the Fiat L6/40, the Fiat M11/39 and the Fiat M13/40. It was also adapted as infantry machine gun. The M38 is based upon the Breda M37. The Breda 38 received the German identification code Kampfwagen-Maschinengewehr 350(i).
The M1 and M1A1 were portable flamethrowers developed by the United States during World War II. The M1 weighed 72 lb, had a range of 15 meters, and had a fuel tank capacity of five gallons. The improved M1A1 weighed less, at 65 lb, had a much longer range of 45 meters, had the same fuel tank capacity, and fired thickened fuel (napalm).
The Fiat–Revelli Modello 1914 was an Italian water-cooled medium machine gun produced from 1914 to 1918. It was the standard machine-gun of the Italian Army in World War I, and was used in limited numbers into World War II. The ammunition was fed from a awkward large box magazine, which could hold 50 rounds and fired the same 6.5mm round issued for the Carcano rifle. Like many machine guns of that period, it was water cooled and somewhat cumbersome.
The 81/14 Model 35 Mortar was an Italian World War II infantry mortar. It was the standard weapon of the Italian Army during the war, of typical Brandt-system construction, but relatively lightweight, with good range and considered very successful.
The Breda Mod. 35 is a hand grenade issued to the Royal Italian Army during World War II.
The Breda Mod. 42 was an anti-tank grenade, developed by Breda, supplied to the Royal Italian Army during World War II.
The OTO Mod. 35 was a hand grenade issued to the Regio Esercito during World War II.
The Type L is an anti-tank hand grenade provided to the Royal Italian Army during World War II.
The Breda 5C was an Italian medium machine gun, which was adopted by the Royal Italian Army and used in the Second Italo-Ethiopian War and in World War II.
The Lanciafiamme Mod. 41 d'assalto was an flamethrower used by the Royal Italian Army during World War II, The mod. 41 was meant to be an extremely light and compact flamethrower to equip paratroopers and Assault Engineers, The flamethrower remained in use after the war until 1998.
This page is based on this Wikipedia article Text is available under the CC BY-SA 4.0 license; additional terms may apply. Images, videos and audio are available under their respective licenses.
