Latent growth modeling

Last updated

Latent growth modeling is a statistical technique used in the structural equation modeling (SEM) framework to estimate growth trajectories. It is a longitudinal analysis technique to estimate growth over a period of time. It is widely used in the field of psychology, behavioral science, education and social science. It is also called latent growth curve analysis. The latent growth model was derived from theories of SEM. General purpose SEM software, such as OpenMx, lavaan (both open source packages based in R), AMOS, Mplus, LISREL, or EQS among others may be used to estimate growth trajectories.

Contents

Background

Latent Growth Models [1] [2] [3] [4] represent repeated measures of dependent variables as a function of time and other measures. Such longitudinal data share the features that the same subjects are observed repeatedly over time, and on the same tests (or parallel versions), and at known times. In latent growth modeling, the relative standing of an individual at each time is modeled as a function of an underlying growth process, with the best parameter values for that growth process being fitted to each individual.

These models have grown in use in social and behavioral research since it was shown that they can be fitted as a restricted common factor model in the structural equation modeling framework. [4]

The methodology can be used to investigate systematic change, or growth, and inter-individual variability in this change. A special topic of interest is the correlation of the growth parameters, the so-called initial status and growth rate, as well as their relation with time varying and time invariant covariates. (See McArdle and Nesselroade (2003) [5] for a comprehensive review)

Although many applications of latent growth curve models estimate only initial level and slope components, more complex models can be estimated. Models with higher order components, e.g., quadratic, cubic, do not predict ever-increasing variance, but require more than two occasions of measurement. It is also possible to fit models based on growth curves with functional forms, often versions of the generalised logistic growth such as the logistic, exponential or Gompertz functions. Though straightforward to fit with versatile software such as OpenMx, these more complex models cannot be fitted with SEM packages in which path coefficients are restricted to being simple constants or free parameters, and cannot be functions of free parameters and data. Discontinuous models where the growth pattern changes around a time point (for example, is different before and after an event) can also be fit in SEM software. [6]

Similar questions can also be answered using a multilevel model approach. [7]

Related Research Articles

Psychological statistics is application of formulas, theorems, numbers and laws to psychology. Statistical methods for psychology include development and application statistical theory and methods for modeling psychological data. These methods include psychometrics, factor analysis, experimental designs, and Bayesian statistics. The article also discusses journals in the same field.

Cronbach's alpha, also known as tau-equivalent reliability or coefficient alpha, is a reliability coefficient and a measure of the internal consistency of tests and measures.

<span class="mw-page-title-main">Structural equation modeling</span> Form of causal modeling that fit networks of constructs to data

Structural equation modeling (SEM) is a diverse set of methods used by scientists doing both observational and experimental research. SEM is used mostly in the social and behavioral sciences but it is also used in epidemiology, business, and other fields. A definition of SEM is difficult without reference to technical language, but a good starting place is the name itself.

Multilevel models are statistical models of parameters that vary at more than one level. An example could be a model of student performance that contains measures for individual students as well as measures for classrooms within which the students are grouped. These models can be seen as generalizations of linear models, although they can also extend to non-linear models. These models became much more popular after sufficient computing power and software became available.

In statistics, confirmatory factor analysis (CFA) is a special form of factor analysis, most commonly used in social science research. It is used to test whether measures of a construct are consistent with a researcher's understanding of the nature of that construct. As such, the objective of confirmatory factor analysis is to test whether the data fit a hypothesized measurement model. This hypothesized model is based on theory and/or previous analytic research. CFA was first developed by Jöreskog (1969) and has built upon and replaced older methods of analyzing construct validity such as the MTMM Matrix as described in Campbell & Fiske (1959).

Karl Gustav Jöreskog is a Swedish statistician. Jöreskog is a professor emeritus at Uppsala University, and a co-author of the LISREL statistical program. He is also a member of the Royal Swedish Academy of Sciences. Jöreskog received his bachelor's, master's, and doctoral degrees at Uppsala University. He is also a former student of Herman Wold. He was a statistician at Educational Testing Service (ETS) and a visiting professor at Princeton University.

Psychometric software is software that is used for psychometric analysis of data from tests, questionnaires, or inventories reflecting latent psychoeducational variables. While some psychometric analyses can be performed with standard statistical software like SPSS, most analyses require specialized tools.

<span class="mw-page-title-main">OpenMx</span>

OpenMx is an open source program for extended structural equation modeling. It runs as a package under R. Cross platform, it runs under Linux, Mac OS and Windows.

PottersWheel is a MATLAB toolbox for mathematical modeling of time-dependent dynamical systems that can be expressed as chemical reaction networks or ordinary differential equations (ODEs). It allows the automatic calibration of model parameters by fitting the model to experimental measurements. CPU-intensive functions are written or – in case of model dependent functions – dynamically generated in C. Modeling can be done interactively using graphical user interfaces or based on MATLAB scripts using the PottersWheel function library. The software is intended to support the work of a mathematical modeler as a real potter's wheel eases the modeling of pottery.

<span class="mw-page-title-main">Anton Formann</span>

Anton K. Formann was an Austrian research psychologist, statistician, and psychometrician. He is renowned for his contributions to item response theory, latent class analysis, the measurement of change, mixture models, categorical data analysis, and quantitative methods for research synthesis (meta-analysis).

One application of multilevel modeling (MLM) is the analysis of repeated measures data. Multilevel modeling for repeated measures data is most often discussed in the context of modeling change over time ; however, it may also be used for repeated measures data in which time is not a factor.

Kenneth A. Bollen is the Henry Rudolf Immerwahr Distinguished Professor of Sociology at the University of North Carolina at Chapel Hill. Bollen joined UNC-Chapel Hill in 1985. He is also a member of the faculty in the Quantitative Psychology Program housed in the L. L. Thurstone Psychometric Laboratory. He is a fellow at the Carolina Population Center, the American Statistical Association and the American Association for the Advancement of Science. He was also the Director of the Odum Institute for Research in Social Science from 2000 to 2010. His specialties are population studies and cross-national analyses of democratization.

The partial least squares path modeling or partial least squares structural equation modeling is a method for structural equation modeling that allows estimation of complex cause-effect relationships in path models with latent variables.

<span class="mw-page-title-main">SmartPLS</span> Software

SmartPLS is a software with graphical user interface for variance-based structural equation modeling (SEM) using the partial least squares (PLS) path modeling method. Users can estimate models with their data by using basic PLS-SEM, weighted PLS-SEM (WPLS), consistent PLS-SEM (PLSc-SEM), and sumscores regression algorithms. The software computes standard results assessment criteria and it supports additional statistical analyses . Since SmartPLS is programmed in Java, it can be executed and run on different computer operating systems such as Windows and Mac.

<span class="mw-page-title-main">WarpPLS</span>

WarpPLS is a software with graphical user interface for variance-based and factor-based structural equation modeling (SEM) using the partial least squares and factor-based methods. The software can be used in empirical research to analyse collected data and test hypothesized relationships. Since it runs on the MATLAB Compiler Runtime, it does not require the MATLAB software development application to be installed; and can be installed and used on various operating systems in addition to Windows, with virtual installations.

Jeffrey Scott Tanaka was an American psychologist and statistician, known for his work in educational psychology, social psychology and various fields of statistics including structural equation modeling.

Patrick James Curran is an American psychologist and statistician. He is a professor of quantitative psychology at the University of North Carolina, where he is also a faculty member at the Center for Developmental Science.

Daniel John Bauer is an American statistician, professor, and director of the quantitative psychology program at the University of North Carolina, where he is also on the faculty at the Center for Developmental Science. He is known for rigorous methodological work on latent variable models and is a proponent of integrative data analysis, a meta-analytic technique that pools raw data across multiple independent studies.

John J. McArdle is Professor of Psychology and Gerontology at the University of Southern California (USC), where he is also director of the Unified Studies of Cognition (CogUSC) Lab. He is known for his work on quantitative research methodology and on the changes in cognitive function and personality that occur as individuals age.

In statistics, confirmatory composite analysis (CCA) is a sub-type of structural equation modeling (SEM). Although, historically, CCA emerged from a re-orientation and re-start of partial least squares path modeling (PLS-PM), it has become an independent approach and the two should not be confused. In many ways it is similar to, but also quite distinct from confirmatory factor analysis (CFA). It shares with CFA the process of model specification, model identification, model estimation, and model assessment. However, in contrast to CFA which always assumes the existence of latent variables, in CCA all variables can be observable, with their interrelationships expressed in terms of composites, i.e., linear compounds of subsets of the variables. The composites are treated as the fundamental objects and path diagrams can be used to illustrate their relationships. This makes CCA particularly useful for disciplines examining theoretical concepts that are designed to attain certain goals, so-called artifacts, and their interplay with theoretical concepts of behavioral sciences.

References

  1. Tucker, L.R. (1958) Determination of parameters of a functional relation by factor analysis. Psychometrika23, 19-23.
  2. Rao, C.R. (1958) Some statistical methods for the comparison of growth curves. Biometrics. 14, 1-17.
  3. Scher, A.M., Young, A.C. & Meredith, W.M. (1960) Factor analysis of the electrocardiogram. Circulation Research8, 519-526.
  4. 1 2 Meredith, W., & Tisak, J. (1990). Latent curve analysis. Psychometrika, 55, 107–122.
  5. McArdle, J.J., & Nesselroade, J.R. (2003). Growth curve analysis in contemporary psychological research. In J. Schinka & W. Velicer (Eds.), Comprehensive handbook of psychology: Research methods in psychology (Vol. 2, p. 447–480). New York: Wiley.
  6. Rioux, Charlie; Stickley, Zachary L.; Little, Todd D. (2021). "Solutions for latent growth modeling following COVID-19-related discontinuities in change and disruptions in longitudinal data collection". International Journal of Behavioral Development. 45 (5): 463–473. doi:10.1177/01650254211031631. hdl: 2346/87456 . ISSN   0165-0254. S2CID   237204627.
  7. Grimm, Kevin J. (2017). Growth modeling : structural equation and multilevel modeling approaches. Nilam Ram, Ryne Estabrook. New York, NY. ISBN   978-1-4625-2606-2. OCLC   926062148.{{cite book}}: CS1 maint: location missing publisher (link)

Further reading