A loose wheel nut indicator is a measuring tool that warns of loose wheel nuts, which is the most common cause of wheels on vehicles falling off. [1]
A loose wheel nut indicator is a measuring tool that warns of loose wheel nuts, which is the most common cause of wheels on vehicles falling off. [1]
In 1990, Mike Marczynski, who was responsible for a commercial vehicle fleet, developed the locking system for lug nuts and initially marketed them in Great Britain under the Checkpoint brand name. His invention is now available in more than 90 countries on 6 continents. The product has also established itself in Germany, and trucks with the safety system can be seen more and more frequently on the Autobahn. The original loose lug nut securing product, the Checkpoint, has been supplemented by other products such as Dustite and Dustite LR which combine the function of a lug nut indicator with a dust cap, providing additional corrosion protection for bolts and nuts. Wheel overheating due to problems with the brakes and/or ball bearings is a common problem for vehicle operators. To solve this problem and improve the safety of vehicles using the products, indicators equipped with an overheat indicator have been developed. For this purpose, specific polymers were used, which first deform and then melt at elevated temperatures. Lug nut indicators made of a material that can withstand high temperatures were developed especially for the needs of rescue vehicles, where the driving and braking behavior is significantly different. Its melting point of 165 °C is considerably higher than that of the standard version (melting point at approx. 125 °C).
The Checkpoint / Dustite / Dustite LR is attached to two adjacent wheel nuts in such a way that the respective indicator tips point towards each other. Should a lug nut become loose, the pointer will move in line with the movement of the lug nut, i.e. the tips no longer point to each other. The wheel nut indicators allow not only a quick and efficient check of the wheels by the driver, but also by the control authorities. In addition, the inspection can be easily documented with a photo.
A common type of loose wheel nut indicators are small pointed tags, usually made of fluorescent orange or yellow plastic, which are fixed to the lug nuts of the wheels of large vehicles. [2] The tag rotates with the nut, and if the nut becomes loose, the point of the tag shifts noticeably out of alignment with the other tags. If too many lug nuts are loosened, the wheel can detach from the wheel stud; loose wheel nut indicators allow identification of loose nuts before this can occur.
Loose wheel nut indicators or lug nut indicators are used both by auto mechanics and drivers to identify lug nuts which require tightening, as well as by accident investigators to detect faults after accidents. Although generally not compulsory, road safety bodies frequently recommend their use, [3] [4] [5] especially on large or heavy vehicles such as buses, coaches, large vans, and trucks. [6] [7] [8]
Advancements in anti-lock braking systems (ABS) have made it possible to detect loose wheel nuts by using sensors from the ABS system in the car's software. [9] The system functions by detecting and recognizing vibrations which could indicate a loose wheel.
In 2018, Audi launched electronic wheel nut indicators on some of their more expensive models, [10] and by 2021 Audi had sold over 1 million cars with the technology. [11]
An anti-lock braking system (ABS) is a safety anti-skid braking system used on aircraft and on land vehicles, such as cars, motorcycles, trucks, and buses. ABS operates by preventing the wheels from locking up during braking, thereby maintaining tractive contact with the road surface and allowing the driver to maintain more control over the vehicle.
A hubcap or hub cap is a decorative disk on an automobile wheel that covers at minimum the central portion of the wheel, called the hub. An automobile hubcap is used to cover the wheel hub and the wheel fasteners to reduce the accumulation of dirt and moisture. It also has the function of decorating the car.
Electronic stability control (ESC), also referred to as electronic stability program (ESP) or dynamic stability control (DSC), is a computerized technology that improves a vehicle's stability by detecting and reducing loss of traction (skidding). When ESC detects loss of steering control, it automatically applies the brakes to help steer the vehicle where the driver intends to go. Braking is automatically applied to wheels individually, such as the outer front wheel to counter oversteer, or the inner rear wheel to counter understeer. Some ESC systems also reduce engine power until control is regained. ESC does not improve a vehicle's cornering performance; instead, it helps reduce the chance of the driver losing control of the vehicle.
The Audi A6 is an executive car made by the German company Audi since 1994. Now in its fifth generation, the successor to the Audi 100 is manufactured in Neckarsulm, Germany, and is available in saloon and estate configurations, the latter marketed by Audi as the Avant. Audi's internal numbering treats the A6 as a continuation of the Audi 100 lineage, with the initial A6 designated as a member of the C4-series, followed by the C5, C6, C7, and the C8. The related Audi A7 is essentially a Sportback (liftback) version of the C7-series and C8-series A6 but is marketed under its own separate identity and model designation.
The Audi A3 is a subcompact executive/small family car (C-segment) manufactured and marketed by the German automaker Audi AG since September 1996, currently in its fourth generation.
The Audi A8 is a full-size luxury sedan manufactured and marketed by the German automaker Audi since 1994. Succeeding the Audi V8, and now in its fourth generation, the A8 has been offered with either front- or permanent all-wheel drive and in short- and long-wheelbase variants. The first two generations employed the Volkswagen Group D platform, with the current generation deriving from the MLB platform. After the original model's 1994 release, Audi released the second generation in late 2002, the third in late 2009, and the fourth and current iteration in 2017. Noted as the first mass-market car with an aluminium chassis, all A8 models have used this construction method co-developed with Alcoa and marketed as the Audi Space Frame.
The wheel size for a motor vehicle or similar wheel has a number of parameters.
Electronic brakeforce distribution or electronic brakeforce limitation (EBL) is an automobile brake technology that automatically varies the amount of force applied to each of a vehicle's wheels, based on road conditions, speed, loading, etc, thus providing intelligent control of both brake balance and overall brake force. Always coupled with anti-lock braking systems (ABS), EBD can apply more or less braking pressure to each wheel in order to maximize stopping power whilst maintaining vehicular control. Typically, the front end carries more weight and EBD distributes less braking pressure to the rear brakes so the rear brakes do not lock up and cause a skid. In some systems, EBD distributes more braking pressure at the rear brakes during initial brake application before the effects of weight transfer become apparent.
The Audi Q5 is a series of compact luxury crossover SUVs produced by the German luxury car manufacturer Audi from 2008. The original first-generation model was the third member of the B8 family to be released after the Audi A5 and fourth-generation A4, all being based on the Audi MLB platform. The second generation Q5 debuted in 2018 and shares the Audi MLB Evo platform with the corresponding B9 versions of the A4 and A5.
The spinner on automobile wheels historically refers to knock-off hub nuts or center caps. They may be the actual, or intended to simulate, the design used on antique vehicles or vintage sports cars. A "spinner wheel" in contemporary usage is a type of hubcap or inner wheel ornament, that spins independently inside of a wheel itself when the vehicle is in motion and continues to spin once the vehicle has come to a stop.
A lug wrench, also colloquially known as a tire iron, is the name for a type of socket wrench used to loosen and tighten lug nuts on automobile wheels. In the United Kingdom and Australia, it is commonly known as a wheel brace.
The rim is the "outer edge of a wheel, holding the tire". It makes up the outer circular design of the wheel on which the inside edge of the tire is mounted on vehicles such as automobiles. For example, on a bicycle wheel the rim is a large hoop attached to the outer ends of the spokes of the wheel that holds the tire and tube. In cross-section, the rim is deep in the center and shallow at the outer edges, thus forming a "U" shape that supports the bead of the tire casing.
A lug nut or wheel nut is a fastener, specifically a nut, used to secure a wheel on a vehicle. Typically, lug nuts are found on automobiles, trucks (lorries), and other large vehicles using rubber tires.
The Audi A1 is a supermini car launched by Audi at the 2010 Geneva Motor Show. Sales of the initial three-door A1 model started in Germany in August 2010, with the United Kingdom following in November 2010. A five-door version, called Sportback, was launched in November 2011, with sales starting in export markets during spring 2012. The second generation was released in 2019. The three-door production model was discontinued.
Wheel studs are the threaded fasteners that hold on the wheels of many automobiles. They are semi-permanently mounted directly to the vehicle hub, usually through the brake drum or brake disk. Lug nuts are fastened onto the wheel stud to secure the wheel. When a wheel is removed for tire changes etc., the stud remains in the hub.
In mechanics, friction torque is the torque caused by the frictional force that occurs when two objects in contact move. Like all torques, it is a rotational force that may be measured in newton meters or pounds-feet.
NIRA Dynamics AB is a Swedish company focusing on research and development of signal processing and control systems for the automotive industry. It supplies automotive original equipment manufacturers (OEMs) and suppliers in Europe, North America, Latin America, and Asia with its products and systems. In 2021, the number of vehicles equipped with NIRA's main product, TPI, exceeded the benchmark of 75,000,000.
The Audi R8 LMS Cup was a one-make sports car racing series by Audi based in Asia. Audi R8 LMS Cup cars were based on the Audi R8 LMS (GT3).
The Audi Q8 is a mid-size luxury crossover SUV coupé made by Audi that was launched in 2018. It is the flagship of the Audi SUV line, and is being produced at the Volkswagen Bratislava Plant.
A centerlock wheel is a type of automobile wheel in which the wheel is fastened to the axle using a single, central nut, instead of the more common ring of 4 or 5 lug nuts or bolts.
{{cite web}}: CS1 maint: numeric names: authors list (link)