Lulworth (yacht)

Last updated
The Lulworth, 2021.jpg

The boat's name comes from Lulworth Castle, which belonged to her second owner, Herbert Weld, whose grandfather was a charter-member of the Royal Yacht Squadron. [1] The Lulworth (1920) was built by the White Brothers' Yard for Richard H. Lee, who wanted a racing boat to compete in the premier yachting league in Europe: the British "Big Class".

Shortages in the supply of premium spruce after World War I meant that Lulworth's original lower-mast was made of steel instead of wood. This constraint handicapped Lulworth greatly, leaving her trailing older, more famous Big Class racers like Thomas Benjamin Frederick Davis's Herreshoff-designed schooner Westward (1910), HMY Britannia I (1893) and Sir Thomas J. Lipton's Fife-designed 23mR Shamrock (1908).

Her gaff-rigged sail plan was updated several times to no avail, until America's Cup naval architect Charles Ernest Nicholson redesigned the rig with a wooden lower-mast and adjusted the keel balance. By 1924, Lulworth's flaws were corrected and she became an accomplished racer in all subsequent seasons of the Big Class: from 1920 to 1930, she took part in 258 regattas, taking 59 first places, 47 of which were after 1924.

Obsolescence and revival

The 1930 America's Cup saw the arrival of the innovative J-Class designs that made all gaff-rigged yachts obsolete. Despite The Lulworth's early successes against the J-Class Shamrock V (1930) before the America's Cup, handicapping rules in the Big Class were ended and Lulworth's racing career was over. In 1947 Lulworth was saved from the scrap yard by Richard Lucas and his wife Rene. She was taken to Whites Shipyard for restoration and mud-berthed in the River Hamble where she served as a houseboat.

In 1990 her hull was shipped to Italy in hopes of a refit. In 2001 she was bought by Johan J.M. van den Bruele a Dutch yachtsman who owned a mall shipyard for classic boats in Viareggio. A meticulous renovation was started in 2002 which saved 70% of her furnishings and 80% of her steel frames. The sail plan from 1926 was replicated to recreate Lulworth's rig, which features the world's tallest wooden mast. She was relaunched in 2006. Lulworth immediately re-entered racing competition and subsequently won a Boat International Award for the "Best refit of 2006". [2] Lulworth is the world's largest gaff-rigged cutter.

See also

Citations

  1. Montague John Guest (1902). "Lulworth (127-ton cutter, 1828) and Lulworth (80-ton cutter, 1857)". The Royal Yacht Squadron. John Murray Press.
  2. "World Superyacht Awards 2007". BOAT International. Archived from the original on 2012-07-16. Retrieved 2009-02-18.

Related Research Articles

<span class="mw-page-title-main">Schooner</span> Sailing vessel

A schooner is a type of sailing vessel defined by its rig: fore-and-aft rigged on all of two or more masts and, in the case of a two-masted schooner, the foremast generally being shorter than the mainmast. A common variant, the topsail schooner also has a square topsail on the foremast, to which may be added a topgallant. Differing definitions leave uncertain whether the addition of a fore course would make such a vessel a brigantine. Many schooners are gaff-rigged, but other examples include Bermuda rig and the staysail schooner.

<span class="mw-page-title-main">Gaff rig</span> Sailing rig configuration

Gaff rig is a sailing rig in which the sail is four-cornered, fore-and-aft rigged, controlled at its peak and, usually, its entire head by a spar (pole) called the gaff. Because of the size and shape of the sail, a gaff rig will have running backstays rather than permanent backstays.

<span class="mw-page-title-main">Bermuda rig</span> Configuration of mast and rigging for a type of sailboat

A Bermuda rig, Bermudian rig, or Marconi rig is a configuration of mast and rigging for a type of sailboat and is the typical configuration for most modern sailboats. This configuration was developed in Bermuda in the 17th century; the term Marconi, a reference to the inventor of the radio, Guglielmo Marconi, became associated with this configuration in the early 20th century, because the wires that stabilize the mast of a Bermuda rig reminded observers of the wires on early radio masts.

<span class="mw-page-title-main">12 Metre</span> International racing sailing class

The 12 Metre class is a rating class for racing sailboats that are designed to the International rule. It enables fair competition between boats that rate in the class whilst retaining the freedom to experiment with the details of their designs. The designation "12 Metre" does not refer to any single measurement on the boat, and is not referencing the vessels overall length, rather, measures the sum of the components directed by the formula which governs design and construction parameters. Typically 12 Metre class boats range from 65 to 75 feet in length overall; they are most often sloop-rigged, with masts roughly 85 feet tall.

<span class="mw-page-title-main">William Fife</span> Scottish yacht designer (1857–1944)

William Fife Jr., also known as William Fife III, was the third generation of a family of Scottish yacht designers and builders. In his time, William Fife designed around 600 yachts, including two contenders for the America's Cup. The Royal Yachting Association was formed in 1875 to standardise rules, and Fife and his rival G.L. Watson, were instrumental in these rule changes. Around one third of Fife's yachts still exist. His last designs were built in 1938.

<i>America</i> (yacht) Racing yacht; 1st winner of the Americas Cup

America was a 19th-century racing yacht and first winner of the America's Cup international sailing trophy.

<span class="mw-page-title-main">J Class (yacht)</span> Class of racing yachts

The J Class of racing yachts were built to the specifications of Nathanael Herreshoff's Universal Rule. The J Class is considered the apex of the era when the Universal Rule determined eligibility in the America's Cup.

<i>Reliance</i> (yacht)

Reliance was the 1903 America's Cup defender designed by Nat Herreshoff.

Velsheda

The J-class yacht Velsheda was designed by Charles Ernest Nicholson and built in 1933 by Camper and Nicholsons at Gosport, Hampshire. She was built for businessman William Lawrence Stephenson and between 1933 and 1936, she won many races and competed with other yachts of her era such as Britannia, Endeavour and Shamrock V.

<i>Rona</i> (1892)

Rona was a sailing yacht designed by George Lennox Watson. She was constructed in 1892 in Auckland, New Zealand, by master craftsman and designer Robert Logan Snr. for Wellington merchant and book collector Alexander Turnbull, and is the oldest continuously registered ship in New Zealand. The boat was sailed from Auckland to Wellington, leaving Auckland 14 February 1893 and Arrived Wellington Harbour on the 21 February 1893, An article in the Wellington Evening Post on the 22 February 1893 recounted it maiden voyage. The boat is one of the finest surviving examples of a six-beam cutter, she is a gaff-rigged racing cutter, and she is one of the oldest yachts still sailing in New Zealand.

<span class="mw-page-title-main">Sailing yacht</span> Private sailing vessel with overnight accommodations

A sailing yacht, is a leisure craft that uses sails as its primary means of propulsion. A yacht may be a sail or power vessel used for pleasure, cruising, or racing. There is no standard definition, so the term applies here to sailing vessels that have a cabin with amenities that accommodate overnight use. To be termed a "yacht", as opposed to a "boat", such a vessel is likely to be at least 33 feet (10 m) in length and have been judged to have good aesthetic qualities. Sailboats that do not accommodate overnight use or are smaller than 30 feet (9.1 m) are not universally called yachts. Sailing yachts in excess of 130 feet (40 m) are generally considered to be superyachts.

HMY <i>Britannia</i> (Royal Cutter Yacht)

His Majesty's Yacht Britannia was a gaff-rigged cutter built in 1893 for RYS Commodore Albert Edward, Prince of Wales. She served both himself and his son King George V with a long racing career.

<span class="mw-page-title-main">Pearson Ensign</span> Sailboat class

The Pearson Ensign, or Ensign 22, is an American trailerable sailboat that was designed by Carl Alberg as a one-design racer and day sailer and first built in 1962. It is the largest full-keel one-design keelboat class in the United States.

<span class="mw-page-title-main">Pen Duick</span>

Pen Duick is the name best known for a series of ocean racing yachts sailed by French yachtsman Eric Tabarly. Meaning coal tit in Breton, it was the name Tabarly's father gave to the 1898 Fife gaff cutter he purchased, and that his son learned to sail. He thereafter used the name for a series of successful racing yachts through the '60s and '70s.

<i>Endeavour</i> (yacht)

Endeavour is a J-class yacht built for the 1934 America's Cup by Camper and Nicholson in Gosport, England. She was built for Thomas Sopwith who used his aviation design expertise to ensure the yacht was the most advanced of its day with a steel hull and mast. She was 130-foot (40 m) and launched in 1934 and won many races in her first season including against the J's Velsheda and Shamrock V. She failed in her America's Cup challenge against the American defender Rainbow but came closer to lifting the cup than any other until Australia II succeeded in 1983.

<span class="mw-page-title-main">Charles Ernest Nicholson</span> British yacht designer

Charles Ernest Nicholson was a British yacht designer.

<i>Shamrock V</i> British racing yacht

Shamrock V is a British J-class yacht. She was the first British yacht to be built to the new J-Class rule. She was commissioned by Sir Thomas Lipton for his fifth America's Cup challenge. Although refitted several times, Shamrock is the only original J-class never to have fallen into dereliction.

<i>Ariki</i> (yacht)

Ariki is a racing yacht which was built in Auckland, New Zealand in 1904 by Logan Brothers. She had a distinguished career as a racing and cruising yacht. From the time of her launch in Oct 1904 she dominated first class Auckland yacht racing until the appearance of the yacht Ranger in 1938. She has the sail number A3.

The following outline is provided as an overview of and topical guide to sailing:

Camper and Nicholson is a yacht design and manufacturing company based in Gosport, England, for over two hundred years, constructing many significant vessels, such as Gipsy Moth IV and Prince Philip's yacht Bloodhound. Its customers included Thomas Sopwith, William Kissam Vanderbilt II and George Spencer-Churchill, 6th Duke of Marlborough. Its yachts competed in The America's Cup, The Fastnet Race, the Olympics, the Ocean Race and many other yacht races. It also built a number of small warships, notably during the two World Wars, and some as late as the 1950s.

References

Iduna, the restoration of a classical Dutch yacht, Andrew Rogers, 2004.

Sailing-yachts.Tuiga.Lulworth.Cambria.Cannes.2006-09-26-(detail).jpg
Tuiga (D3) and Lulworth (2) in race. France, 2006
History
Civil Ensign of the United Kingdom.svgUnited Kingdom
NameLulworth
Namesake Lulworth Castle
Port of registry Guernsey
Builder
  • White Brothers, Itchen Ferry (1920)
  • Classic Yacht Darsena, Viareggio (2006)
Christened
  • Terpsichore (1920)
  • Lulworth (1924)
Yacht designerHerbert William White (1919)
Paul Spooner (2001)
Burgee Royal Yacht Squadron (1920)
General characteristics
Class and typeBritish Big Class gaff-rigged cutter
Displacement
  • 188 tonnes (2006)
  • of which ballast 80 tonnes
Length
  • 46.30 m (151 ft 11 in) overall
  • 36.87 m (121 ft) on deck (rating)
  • 28.64 m (94 ft) waterline (rating)
Beam6.60 m (21 ft 8 in)
Draught5.50 m (18 ft 1 in)
Sail plan
  • spars (1926/2006):
  • 52.00 m (170 ft 7 in) spruce mast
  • 27.60 m (90 ft 7 in) spruce boom
  • 20.00 m (65 ft 7 in) sitka spinnaker pole
  • Sails:
  • 465 m2 (5,010 sq ft) mainsail
  • 133 m2 (1,430 sq ft) marconi topsail
  • 114 m2 (1,230 sq ft) staysail
  • 69.5 m2 (748 sq ft) jib
  • 46.5 m2 (501 sq ft) jib topsail
  • 500 m2 (5,400 sq ft) spinnaker