Magnetic logic

Last updated

Magnetic logic is digital logic made using the non-linear properties of wound ferrite cores. [1] Magnetic logic represents 0 and 1 by magnetising cores clockwise or anticlockwise. [2]

Examples of magnetic logic include core memory. Also, AND, OR, NOT and clocked shift logic gates can be constructed using appropriate windings, and the use of diodes.

A complete computer called the ALWAC 800 was constructed using magnetic logic, but it was not commercially successful. The Elliott 803 computer used a combination of magnetic cores (for logic function) and germanium transistors (as pulse amplifiers) for its CPU. It was a commercial success.

William F Steagall of the Sperry-Rand corporation developed the technology in an effort to improve the reliability of computers. In his patent [3] 's application, he states "Where, as here, reliability of operation is a factor of prime importance, vacuum tubes, even though acceptable for most present-day electronic applications, are faced with accuracy requirements of an entirely different order of magnitude. For example, if two devices each having 99.5% reliability response are both utilized in a combined relationship in a given device, that device will have an accuracy or reliability factor of .995 X995 =99%. If ten such devices are combined, the factor drops to 95.1%. If, however, 500 such units are combined, the reliability factor of the device drops to 8.1%, and for a thousand, to 0.67%. It will thus be seen that even though the reliability of operation of individual vacuum tubes may be very much above 99.95%, where many thousands of units are combined, as in the large computers, the reliability factor of each unit must be extremely high to combine to produce an error free device. In practice of course such an ideal can only be approached. Magnetic amplifiers of the type here described meet the necessary requirements of reliability of performance for the combinations discussed."

Magnetic logic was able to achieve switching speeds of about 1MHz but was overtaken by semiconductor based electronics which was able to switch much faster.

Solid state semiconductors were able to increase their density according to Moore's Law, and thus proved more effective as IC technology developed.

Magnetic logic has advantages in that it is not volatile, it may be powered down without losing its state. [1]

See also

Related Research Articles

Computer memory Device used on a computer for storing data

In computing, memory is a device or system that is used to store information for immediate use in a computer or related computer hardware and digital electronic devices. The term memory is often synonymous with the term primary storage or main memory. An archaic synonym for memory is store.

Electronics Branch of physics and electrical engineering

The field of electronics is a branch of physics and electrical engineering that deals with the emission, behaviour and effects of electrons using electronic devices. Electronics uses active devices to control electron flow by amplification and rectification, which distinguishes it from classical electrical engineering, which only uses passive effects such as resistance, capacitance and inductance to control electric current flow.

Amplifier electronic device/component that increases the strength of a signal

An amplifier, electronic amplifier or (informally) amp is an electronic device that can increase the power of a signal. It is a two-port electronic circuit that uses electric power from a power supply to increase the amplitude of a signal applied to its input terminals, producing a proportionally greater amplitude signal at its output. The amount of amplification provided by an amplifier is measured by its gain: the ratio of output voltage, current, or power to input. An amplifier is a circuit that has a power gain greater than one.

A logic gate is an idealized model of computation or physical electronic device implementing a Boolean function, a logical operation performed on one or more binary inputs that produces a single binary output. Depending on the context, the term may refer to an ideal logic gate, one that has for instance zero rise time and unlimited fan-out, or it may refer to a non-ideal physical device.

Transistor Solid-state electrically operated switch also used as an amplifier

A transistor is a semiconductor device used to amplify or switch electrical signals and power. The transistor is one of the basic building blocks of modern electronics. It is composed of semiconductor material, usually with at least three terminals for connection to an electronic circuit. A voltage or current applied to one pair of the transistor's terminals controls the current through another pair of terminals. Because the controlled (output) power can be higher than the controlling (input) power, a transistor can amplify a signal. Some transistors are packaged individually, but many more are found embedded in integrated circuits.

Vacuum tube Device that controls electric current between electrodes in an evacuated container

A vacuum tube, electron tube, valve, or tube, is a device that controls electric current flow in a high vacuum between electrodes to which an electric potential difference has been applied.

Digital electronics Electronic circuits that utilize digital signals

Digital electronics is a field of electronics involving the study of digital signals and the engineering of devices that use or produce them. This is in contrast to analog electronics and analog signals.

Semiconductor device Electronic component that exploits the electronic properties of semiconductor materials

A semiconductor device is an electronic component that relies on the electronic properties of a semiconductor material for its function. Semiconductor devices have replaced vacuum tubes in most applications. They conduct electric current in the solid state, rather than as free electrons across a vacuum or as free electrons and ions through an ionized gas.

MOSFET Transistor used for amplifying or switching electronic signals

The metal–oxide–semiconductor field-effect transistor, also known as the metal–oxide–silicon transistor, is a type of insulated-gate field-effect transistor that is fabricated by the controlled oxidation of a semiconductor, typically silicon. The voltage of the covered gate determines the electrical conductivity of the device; this ability to change conductivity with the amount of applied voltage can be used for amplifying or switching electronic signals.

CMOS Technology for constructing integrated circuits

Complementary metal–oxide–semiconductor, also known as complementary-symmetry metal–oxide–semiconductor (COS-MOS), is a type of metal–oxide–semiconductor field-effect transistor (MOSFET) fabrication process that uses complementary and symmetrical pairs of p-type and n-type MOSFETs for logic functions. CMOS technology is used for constructing integrated circuit (IC) chips, including microprocessors, microcontrollers, memory chips, and other digital logic circuits. CMOS technology is also used for analog circuits such as image sensors, data converters, RF circuits, and highly integrated transceivers for many types of communication.

Magnetic-core memory Type of computer memory used from 1955 to 1975

Magnetic-core memory was the predominant form of random-access computer memory for 20 years between about 1955 and 1975. Such memory is often just called core memory, or, informally, core.

Magnetic amplifier

The magnetic amplifier is an electromagnetic device for amplifying electrical signals. The magnetic amplifier was invented early in the 20th century, and was used as an alternative to vacuum tube amplifiers where robustness and high current capacity were required. World War II Germany perfected this type of amplifier, and it was used in the V-2 rocket. The magnetic amplifier was most prominent in power control and low-frequency signal applications from 1947 to about 1957, when the transistor began to supplant it. The magnetic amplifier has now been largely superseded by the transistor-based amplifier, except in a few safety critical, high-reliability or extremely demanding applications. Combinations of transistor and mag-amp techniques are still used.

Electronic component Discrete device in an electronic system

An electronic component is any basic discrete device or physical entity in an electronic system used to affect electrons or their associated fields. Electronic components are mostly industrial products, available in a singular form and are not to be confused with electrical elements, which are conceptual abstractions representing idealized electronic components and elements.

Computer Automatic general-purpose device for performing arithmetic or logical operations

A computer is a machine that can be programmed to carry out sequences of arithmetic or logical operations automatically. Modern computers can perform generic sets of operations known as programs. These programs enable computers to perform a wide range of tasks. A computer system is a "complete" computer that includes the hardware, operating system, and peripheral equipment needed and used for "full" operation. This term may also refer to a group of computers that are linked and function together, such as a computer network or computer cluster.

Random-access memory Form of computer data storage

Random-access memory is a form of computer memory that can be read and changed in any order, typically used to store working data and machine code. A random-access memory device allows data items to be read or written in almost the same amount of time irrespective of the physical location of data inside the memory, in contrast with other direct-access data storage media, where the time required to read and write data items varies significantly depending on their physical locations on the recording medium, due to mechanical limitations such as media rotation speeds and arm movement.

The following outline is provided as an overview of and topical guide to electronics:

Vacuum-tube computer

A vacuum-tube computer, now termed a first-generation computer, is a computer that uses vacuum tubes for logic circuitry. Although superseded by second-generation, transistorized computers, vacuum-tube computers continued to be built into the 1960s. These computers were mostly one-of-a-kind designs.

Current sensing

In electrical engineering, current sensing is any one of several techniques used to measure electric current. The measurement of current ranges from picoamps to tens of thousands of amperes. The selection of a current sensing method depends on requirements such as magnitude, accuracy, bandwidth, robustness, cost, isolation or size. The current value may be directly displayed by an instrument, or converted to digital form for use by a monitoring or control system.

This glossary of electrical and electronics engineering is a list of definitions of terms and concepts related specifically to electrical engineering and electronics engineering. For terms related to engineering in general, see Glossary of engineering.

MOSFET applications Wikimedia list article

The metal–oxide–semiconductor field-effect transistor (MOSFET, MOS-FET, or MOS FET), also known as the metal–oxide–silicon transistor (MOS transistor, or MOS), is a type of insulated-gate field-effect transistor (IGFET) that is fabricated by the controlled oxidation of a semiconductor, typically silicon. The voltage of the covered gate determines the electrical conductivity of the device; this ability to change conductivity with the amount of applied voltage can be used for amplifying or switching electronic signals. The MOSFET was invented by Egyptian engineer Mohamed M. Atalla and Korean engineer Dawon Kahng at Bell Labs in 1959. It is the basic building block of modern electronics, and the most frequently manufactured device in history, with an estimated total of 13 sextillion (1.3 × 1022) MOSFETs manufactured between 1960 and 2018.

References

  1. 1 2 "All-Magnetic Logic". Timeline of Innovations. SRI International . Retrieved 2013-07-01.
  2. ↑ MAGNETIC CORES - PART I - PROPERTIES - Department of Defense 1962 - PIN 28374 - PROPERTIES OF MAGNETIC CORES AND THEIR APPLICATION IN DATA PROCESSING SYSTEM; HOW INFORMATION IS STORED AND TRANSFERRED FROM ONE CORE TO ANOTHER.
  3. ↑ "US2729755A - Bistable device". Google Patents. Retrieved 15 December 2020.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.