Honda Marysville Auto Plant | |
---|---|
Operated | November 1982 |
Location | Marysville, Ohio, United States |
Coordinates | 40°16′40″N83°30′30″W / 40.27778°N 83.50833°W |
Industry | Automotive |
Products | |
Employees | 4,200 |
Volume | 3,600,000 sq ft (330,000 m2) |
Owner(s) | Honda |
Website | ohio |
Honda Marysville Auto Plant (MAP) is a Honda manufacturing facility located approximately six miles northwest of Marysville, Ohio, and 42 miles northwest of Columbus, Ohio, near the intersection of US 33 and State Route 739. It is one of the most integrated and flexible auto plants in North America. Operations include stamping, plastics injection molding, welding, painting, sub-assembly and assembly. The assembly plant opened in 1982.
The Marysville plant is equivalent in size to 39 Walmart stores under one roof. [3] Honda overhauled the Marysville plant over several years one department after another without losing a day of production. During overhaul, Honda replaced old hydraulic welding systems designed for specific models with programmable electronic welding robots that can weld different vehicle body types for better flexibility and higher productivity. [3] Work started in 2002 in advance of the launch of the 2003 Accord. [3] In 2004, Honda commenced work on a 234,000-square-foot extension of the plant for a new paint facility of US$123 m. The new facility uses high-efficiency ovens, air recycling systems, and more efficient variable drive motors that would save 34 percent energy. [4] The company also built a 20-million-gallon pond behind the plant to recycle rainwater for helping to cool the plant. By recycling runoff from parking lots and roofs, the 7-acre pond system would significantly reduce the use of groundwater and save energy cost. [4] The new fully automated paint shop, which can paint 1,000 vehicles a day, was opened in January 2006. [3] It uses a new waterborne coating system, with 84 Motoman robots, that reduces emissions of hazardous substances by 41 percent. [3]
In December 2015, construction of a new paint shop for Line 1 began, costing US$210 million. The new facility has an annual capacity of 229,000 units. When completed in December 2017, it would be the most energy-efficient paint line of the company's auto production network in U.S. and add 300,000-square-foot to Marysville plant. It replaces a facility built in 1985. Auto body painting can account for upward of 60 percent of an auto plant's total energy use, therefore, cutting its energy use would have a significant environmental impact. The new facility uses a more compact and energy-efficient four-coat, two-bake short process, eliminating one primer-coat curing oven. The new paint process reduces volatile organic compounds emissions by nearly 66 percent. [5]
Honda invested US$220 million in Marysville plant, including an all-new welding shop with 342 new robots for US$165 million to prepare for the new Inner Frame construction technique for the 2018 Accord. [6] [7] The new high-volume laser brazing system joins the roof to the body side panels precisely that it eliminates the black plastic garnish many sedans use to cover the rain channels. [7] Honda also expanded rear door-line production capability to accommodate dropping the coupe from the line-up for model year 2018; brought in-house the sub-assembly of front-end modules of the Accord and added a new sub-assembly for the Intelligent Power Unit, which consists of the battery pack and its control systems, for the 2018 Accord Hybrid. [8] [9]
Honda Motor Co., Ltd. is a Japanese public multinational conglomerate manufacturer of automobiles, motorcycles, and battery-powered equipment, headquartered in Minato, Tokyo, Japan.
Acura is the luxury and performance division of Japanese automaker Honda, based primarily in North America. The brand was launched on March 27, 1986, marketing luxury and performance automobiles. Acura sells cars in the United States, Canada, Mexico, Panama, and Kuwait. The company has also previously sold cars in Mainland China, Hong Kong, Russia, and Ukraine. Plans to introduce Acura to the Japanese domestic market in the late 2000s did not eventuate due to the financial crisis of 2007–2008.
The Acura TSX is a compact executive car manufactured by Honda and sold through its Acura division from 2003 to 2014. The TSX spanned two generations, both derived from the corresponding Japanese/European versions of the Honda Accord, which were more compact and sporting-oriented than its larger North American counterpart, the latter platform which also used for the Acura TL which slotted above the TSX in Acura's lineup. All TSXs were built in Sayama, Saitama, Japan.
The Acura TL is an executive car that was manufactured by Acura, the luxury division of Honda. It was introduced in 1995 to replace the Acura Vigor and was badged for the Japanese-market from 1996 to 2000 as the Honda Inspire and from 1996 to 2004 as the Honda Saber. The TL was Acura's best-selling model until it was outsold by the MDX in 2007. In 2005, it ranked as the second best-selling luxury sedan in the United States behind the BMW 3 Series, but sales decreased after the 2008 model year. Four generations of the Acura TL were produced, with the final fourth generation TL premiering in 2008 as a 2009 model and ending production in 2014, when it was replaced together with the TSX by the TLX.
The Acura CL is a midsize grand tourer manufactured by Honda's Acura brand from 1996 until 2003. The CL is often thought to have been a replacement for the Acura Legend coupe. It was not directly related to the first gen TL either, a Japanese-built model which replaced the Vigor and had a longitudinal engine layout. With the advent of the second generation TL in 1999, the transverse engined CL became more precisely a TL coupe. All Acura CLs were built at Honda's plant in East Liberty, Ohio, which is also the plant that builds the Honda Civic. The second generation TL and the Honda Accord upon which the Acura CLs were based, are built at Honda's plant in Marysville, Ohio, a few miles away from East Liberty. The CL was the first Acura to be built in the United States.
Honda Manufacturing of Alabama (HMA) is an automobile factory located in Lincoln, Alabama. It builds light truck Honda vehicles for sale in North America. Production began on November 14, 2001 and was the first Honda factory to both produce engines and assemble vehicles under the same roof. HMA is the sole manufacturer of the Honda Odyssey, Honda Passport, Honda Pilot, and Honda Ridgeline.
East Liberty Auto Plant is a Honda automobile factory in East Liberty, Ohio, United States. The assembly plant opened in 1989. East Liberty is about 45 minutes northwest of Columbus, Ohio.
Honda of Canada Manufacturing is located in Alliston, Ontario and is the automobile manufacturing division of Honda Canada Inc.
The Marysville Motorcycle Plant was a Honda manufacturing facility located eight miles northwest of Marysville, Ohio. The assembly plant opened in 1979 as American Honda Motor Company's first production facility in the United States. It was on the original U.S. Route 33, renamed Honda Parkway when the Route was moved, at the site of an abandoned Pure Oil gas station and a long since razed "lubritorium," and the former rail crossing of the abandoned Erie Lackawanna Marion-Springfield spur.
In the U.S., the seventh generation North American Honda Accord is a mid-size car that was available as a four-door sedan or a two-door coupe and was produced by Honda from September 2002 to 2007. The sedan was also marketed in parts of Latin America, Asia, Middle East, Caribbean, Australia and New Zealand markets, and also known as the Honda Inspire in Japan from 2003. The North American Honda Accord, with modifications for local market needs, was the launch vehicle of Honda in the South Korean market with sales beginning from May 20, 2004.
GAC Honda Automobile Co., Ltd. is a Chinese automobile manufacturing joint venture company based in Guangzhou, Guangdong province.
The American Honda Motor Company, Inc. is the North American subsidiary of the Honda Motor Company. It was founded in 1959. The company combines product sales, service and coordinating functions of Honda in North America, and is responsible for distribution, marketing and sales of Honda and Acura brand automobiles, Honda Powersports products, Honda Power Equipment products, Honda Engines products, Honda Marine engines, and the HondaJet aircraft.
The Acura ILX is a compact car (C-segment) manufactured and marketed by Honda under the Acura brand, based on the ninth-generation Civic sedan. The ILX replaced the Canadian market exclusive Acura CSX. The gasoline-electric hybrid version was Acura's first.
The Acura RLX is a mid-size flagship luxury car manufactured by Honda and sold under their Acura division, released in 2013, succeeding the RL. The RLX was discontinued in 2020.
The Acura TLX is a four-door entry-level luxury sedan sold by Acura, a luxury division of Honda, since 2014. It is the successor to both the TL and TSX models. As of 2021, the discontinuation of the RLX leaves the TLX as the flagship sedan in Acura's lineup.
The second-generation Honda NSX, marketed as the Acura NSX in North America, China and Kuwait, is a two-seater, all-wheel drive, mid-engine hybrid electric sports car developed and manufactured by Honda. The car was developed in collaboration between the company's divisions in Japan and the United States, and all models were hand-built at a dedicated factory in Ohio. Production began in 2016 and ended in 2022 with the Type S variant. It succeeds the first-generation NSX that was produced in Japan from 1990 to 2005. The development team had a goal of making the car suit a wide range of driving conditions, from high-performance driving on winding roads and racetracks to more relaxed street driving.
The A-Spec and Type-S marques represent the high-performance divisions of cars produced by Acura. Acura utilized the Type R marque for their high-performance division of cars from 1997 to 2001, when they produced the Acura Integra Type R. The first vehicle offered as a Type-S variant was the 2001 Acura CL, and the first vehicle offered as an A-Spec variant was the 2003 Acura TL in Canada and the 2002 Acura RSX in the US.