| MC-101 | |
|---|---|
 | |
| Role | Experimental helicopter |
| National origin | France |
| Manufacturer | Matra |
| Designer | Jean Cantinieau |
| First flight | 11 November 1952 |
| Number built | 1 |
| Developed from | Cantinieau C-100 |
| Variants | Aerotécnica AC-12 |
The Matra-Cantinieau MC-101 was an early 1950s French experimental two seat helicopter of conventional tail rotor configuration but with its engine mounted close to the main rotor, above the seating.
The helicopters designed by Jean Cantinieau were distinguished by having an engine positioned in front and immediately below the main rotor drive shaft, above the cockpit. The first of the series was the Cantinieau C-100, which had an open tube frame structure with a braced single tube tail boom, four wheel undercarriage and a 60 kW (80 hp) Minié engine. It first flew in September 1951. [1]
Cantinieau went to the Société Matra to build a two-seat development, the MC-101. This was also an open steel tube design, more complex particularly in the tail boom, though the undercarriage was reduced to simple skids 1.8 m (71 in) apart. [2] It had a 78 kW (105 hp) Hirth HM-504 engine, [3] enclosed in a long, smooth nosed but partially open sided cowling, driving the oscillating rotor hub via a 41:6 reduction gearbox, clutch and Paulstra universal joint. The rotor blades were machined from duralumin. A three blade tail rotor was driven via another Paulstra joint and cardan shaft. [2]
The MC-101 carried two pilots side by side with dual control. There was no cabin but they were protected behind a large perspex screen with rounded vertical edges. It flew for the first time on 11 November 1952. [2] Only one was built. [3]
In 1953 [4] Cantinieau was appointed as director of the Spanish company Aerotécnica's new helicopter division, which also acquired the rights to the MC-101 from Matra. [5] The Hirth engine was replaced with a more powerful 112 kW (150 hp) air-cooled flat four Lycoming O-320, in order to cope better with Madrid's hot and high atmosphere, and the helicopter was renamed the Aerotécnica AC-11. [4] Further development led to the Aerotécnica AC-12 with an enclosed fuselage and cabin. [5]
Data from Jane's All the World's Aircraft 1953-54 [2]
General characteristics
Performance
The Dassault MD 315 Flamant is a French light twin-engined transport airplane built shortly after World War II by Dassault Aviation for the French Air Force.
The Hiller OH-23 Raven is a three-place, military light observation helicopter based on the Hiller Model 360. The Model 360 was designated by the company as the UH-12, which was first flown in 1948.
The BŻ-1 GIL was the first Polish experimental helicopter, constructed in 1950. Developed by the Main Aviation Institute (Warsaw), the only constructed GIL saw service until 1960 when it was irreparably damaged and subsequently decommissioned. The prototype aircraft currently resides at the Polish Aviation Museum.
The Aerotécnica AC-12Pepo is a Spanish two-seat light helicopter manufactured in 1956 by Aerotécnica.
The Aerotécnica AC-14 was a Spanish five-seat light helicopter of the 1950s, designed by Jean Cantinieau, based on enlarging his Nord Norelfe design.
The Agusta A.101 was a large prototype transport helicopter developed in Italy during the 1960s. Despite prospective orders from the Italian armed forces, no buyers emerged and the project was abandoned in 1971.
The Seibel S-4 was a two-bladed, single-engine helicopter built by Seibel Helicopter. Designed by Charles Seibel, the S-4 was evaluated by the United States Army under the designation YH-24 Sky Hawk, but would be rejected for service. The S-4B would serve as the basis for the design of the Cessna CH-1 Skyhook, the only helicopter Cessna ever produced.
The Napier Eland was a British turboshaft or turboprop gas-turbine engine built by Napier & Son in the early 1950s. Production of the Eland ceased in 1961 when the Napier company was taken over by Rolls-Royce.
The Hirth HM 504 is a four-cylinder air-cooled inverted inline engine. The HM 504 was a popular engine for light aircraft of the 1930s-1940s, and it was used to power a number of Germany's trainer aircraft of World War II. The engine featured a cast magnesium alloy crankcase. The Hitachi Hatsukaze Model 11 was a Japanese licensed version.
The Klemm Kl 107 was a two-seat light aircraft developed in Germany in 1940. It was a conventional low-wing cantilever monoplane of wooden construction with fixed tailwheel undercarriage. Wartime production totalled only five prototypes and some 20 production machines before the Klemm factory was destroyed by Allied bombing. Following World War II and the lifting of aviation restrictions on Germany, production recommenced in 1955 with a modernised version, the Kl 107B, of which Klemm built a small series before selling all rights to the design to Bölkow. This firm further revised the design and built it as the Kl 107C before using it as the basis for their own Bo 207.
The Brochet MB.100 was a three-seat light aircraft developed in France in the early 1950s.
The SNCASE SE.3120 Alouette ("Lark") was a utility helicopter developed in France in the early 1950s but which did not enter production. Designed in parallel with the SE.3110, the Alouette shared that machine's dynamic components, with the exception of its unusual twin tail rotor. The Alouette featured an open-framework fuselage behind a cockpit that was enclosed by a bubble canopy. Skid undercarriage and tricycle gear were both tested.
The Doman LZ-5 was a utility helicopter developed in the United States in the early 1950s by Doman Helicopters Inc. of Danbury, Connecticut. Despite the procurement of international manufacturing agreements, no series production of the aircraft ever occurred and only three prototypes were built. Two of these were purchased by the United States Army as the YH-31, but eventually becoming VH-31.
The Nord 1750 Norelfe was a 1950s French three-seat helicopter built by Nord Aviation and designed by Jean Cantinieau.
The Morane-Saulnier MS.603 was a French-built two-seat light aircraft of the late 1940s.
The Aero HC-2 Heli Baby is a two-seat light general-purpose utility helicopter, designed by engineer Jaroslav Slechta, and produced by the Czechoslovakian company Aero Vodochody in the 1950s. It has a three-bladed main rotor, and a two-bladed tail rotor. The helicopter has an entirely metal frame and cockpit, and windows made of Plexiglas. It was the first and the only Czechoslovakian-designed helicopter to be produced.
The Skyline SL-222 is a three-bladed, twin-engined light utility helicopter developed by the Ukrainian company Skyline. It made its first flight in 2011 and is intended to compete on the civil market in the same low-cost category as the popular Robinson R22.
The Omega BS-12 was a utility helicopter with high ground clearance designed to carry loads behind the cabin at, or near, the center of gravity.
The SNCASE SE-3101 or Sud-Est SE-3101 was an early, experimental French helicopter with twin tail rotors. Only one was built.
The Payen Arbalète was a small, pusher configuration, experimental French tailless aircraft, designed by Nicolas Roland Payen, and first flown in 1965.