Mendeleev tank

Last updated
Mendeleev tank
Mendeleev tank.jpg
Artist sketch of the Mendeleev tank
Type Tank
Place of originRussia
Production history
DesignerVasiliy Donald Mendeleev
Designed1911-1916
Manufacturernever built
Unit cost$ 1,750,000
Specifications
MassApproximately 173.2 tons
Length13 m (42 ft 8 in) (with gun)
10 m (32 ft 10 in) (hull)
Height4.45 m (14 ft 7 in) (machine gun turret up)
3.5 m (11 ft 6 in) (machine gun turret lowered)
Crew11-12

Armor Front: 150 mm (5.9 in)
Sides and rear: 100 mm (3.9 in)
Main
armament
120 mm Canet gun (51 shells)
Secondary
armament
1 x light machine gun
EnginePetrol gasoline engine taken from a submarine
250 hp (190 kW)
Power/weight1.44 hp/t
Suspension Pneumatic piston suspension
Maximum speed Maximum 24 km/h (15 mph)

The Mendeleev tank was a proposed early tank design by Russian naval engineer Vasiliy Mendeleev, son of Russian scientist Dimitri Mendeleev, who created the modern periodic table. The vehicle was envisioned by Mendeleev during his time working at the Kronshtadt Marine Engineering School in Saint Petersburg, Russia, from 1911 to 1915. Its purported purpose was to be a "landship" immune to all enemy fire and able to cross large battlefields while providing heavy artillery support to troops using a 120 mm gun. The proposed tank was one of the heaviest tank designs of all time; at 173.2 tons it would have been nearly the same weight as the World War II German Panzer VIII Maus superheavy tank. [1]

Contents

Design

The Mendeleev tank was of a complete rectangular construction, with its main gun at the front, a machine gun turret mounted to the roof just aft of the middle and tracks protruding directly from the bottom of the hull. The tank was supposed to have a crew of eight operating it.

Armament

The Mendeleev tank was exceptionally well armed for tank design concept at its time. It was slated to have a 120 mm (4.7 in) Canet naval gun with 57 rounds of ammunition, mounted directly at the front of the tank, much larger than the common calibres of tanks in both World War I and World War II. For comparison, the armament of the British Mark IV tank was two 57 mm QF 6-pounder 6 cwt Hotchkiss guns. The gun was able to swivel left and right as well as elevate and depress. In addition, the gun was supposed to feature a recoil system rather than be placed on a fixed rigid mount, a concept very advanced for the time. [2] The Canet gun would be used to provide direct artillery fire against enemy units, making the Mendeleev tank essentially a mobile artillery platform. The tank was also equipped with a light machine gun installed in a turret that was rotatable as well as being able to be retracted when not in use to lower the silhouette of the vehicle.

Propulsion

Mendeleev designed a novel form of tracked propulsion of the vehicle that differed vastly from other designs of the time. His plans for the vehicle featured a continuous track whose circumference enveloped the entire side of the vehicle. The advanced part of this design was the use of a pneumatic piston suspension that allowed the individual road wheels to be lowered or elevated to a desired height. This would've allowed for very stable traversal of rough or uneven terrain as well as Mendeleev's idea of allowing the tank to completely lower the hull onto the ground, turning the tank into a mobile fortress that could bunker down when need be, protecting the most vulnerable area of the vehicle; the running gear. This feature also was supposed to combine with a special device which could move it on rails, where it could even move by its own, or with the aid of a locomotive. [3] To propel the vehicle, the Mendeleev tank was supposed to use a petrol gasoline engine from a submarine with 250 horsepower, giving the 173.2 ton vehicle a power to weight ratio of 1.44 hp/t. The vehicle was supposed to be able to reach a maximum speed of 24 km/h, though whether this would be achievable in actuality is unknown.

Protection

The Mendeleev tank featured extremely heavy armour for a vehicle of its time, with armour made from heavy steel plating that likes of which were found on warships that ranged from 150 mm thick at the front to 100 mm thick around the sides and rear. In comparison, tanks in WWI were armoured only for protection from rifle fire and machine guns having maximum armour thickness of 30 mm on the German A7V, while the far more numerous British Mark IV had armour 12 mm thick. The planned armour of the Mendeleev was thicker than tanks found in WWII such as the formidable German Tiger II heavy tank which had around 150 mm of armour at the front. The Mendeleev's exceptional protection came at the cost of weight, with the tank weighing in at 173.2 tons, making it even heavier than the German K-Wagen, a similar superheavy tank design that almost saw fruition. [4]

History

The initial design is thought to date back to as early as 1898. It was worked upon in 1911, and presented in 1916. [5] However, the vehicle was never constructed due to the little support it received by backers or the government. Mendeleev even attempted to construct the vehicle himself, but it was never started, causing the design to remain as only a series of plans and drawings. [6]

Footnotes

  1. Matveyev, Vadim (2014-09-29). "The first Russian tanks: A long and difficult road to the battlefield". Russia Beyond. Rossiyskaya Gazeta. Retrieved 2019-02-10.
  2. Kempf, P. "The Mendeleyev Tank". Landships II. Retrieved 12 November 2018.
  3. "Mendeleev Rybinsk Super Heavy Tank". G1886 Technology. 22 September 2013. Retrieved 5 May 2019.
  4. "Mendeleev Super Heavy Tank". www.globalsecurity.org. Retrieved 2019-02-10.
  5. Haskew, Michael E. (2015). Tank: 100 Years of the World's Most Important Armored Military Vehicle. Minneapolis: Zenith Press. ISBN   9780760349632.
  6. Budanovic, Nikola (2016-11-11). "Four Combat Monsters - The Super-Heavy Tanks Of WWI". WAR HISTORY ONLINE. Retrieved 2019-02-10.

Related Research Articles

<span class="mw-page-title-main">Armoured fighting vehicle</span> Combat vehicle with both armament and armour

An armoured fighting vehicle or armored fighting vehicle (AFV) is an armed combat vehicle protected by armour, generally combining operational mobility with offensive and defensive capabilities. AFVs can be wheeled or tracked. Examples of AFVs are tanks, armoured cars, assault guns, self-propelled artilleries, infantry fighting vehicles (IFV), and armoured personnel carriers (APC).

<span class="mw-page-title-main">Tank destroyer</span> Armoured fighting vehicle designed to engage and destroy enemy tanks

A tank destroyer, tank hunter or tank killer is a type of armoured fighting vehicle, predominantly intended for anti-tank duties. They are typically armed with a direct fire artillery gun, also known as a self-propelled anti-tank gun, or missile launcher, also called an anti-tank missile carrier. The vehicles are designed specifically to engage and destroy enemy tanks, often with limited operational capacities.

<span class="mw-page-title-main">Kliment Voroshilov tank</span> WWII Soviet heavy tank

The Kliment Voroshilov tanks are a series of Soviet heavy tanks named after the Soviet defence commissar and politician Kliment Voroshilov who operated with the Red Army during World War II. The KV tanks were known for their heavy armour protection during the early stages of the war, especially during the first year of the German invasion of the Soviet Union. In certain situations, even a single KV-1 or KV-2 supported by infantry could halt German formations. The German Wehrmacht at that time rarely deployed its tanks against KVs, as their own armament was too poor to deal with the "Russischer Koloss" – "Russian Colossus".

<span class="mw-page-title-main">T-62</span> 1961 Soviet medium tank

The T-62 is a Soviet main battle tank that was first introduced in 1961. As a further development of the T-55 series, the T-62 retained many similar design elements of its predecessor including low profile and thick turret armour.

<span class="mw-page-title-main">T-26</span> Soviet light infantry tank

The T-26 tank was a Soviet light tank used during many conflicts of the Interwar period and in World War II. It was a development of the British Vickers 6-Ton tank and was one of the most successful tank designs of the 1930s until its light armour became vulnerable to newer anti-tank guns. It was produced in greater numbers than any other tank of the period, with more than 11,000 units manufactured giving it the title of the most produced tank during the interwar period. During the 1930s, the USSR developed 53 variants of the T-26, including flame-throwing tanks, combat engineer vehicles, remotely controlled tanks, self-propelled guns, artillery tractors, and armoured carriers. Twenty-three of these were series-produced, others were experimental models.

<span class="mw-page-title-main">History of the tank</span> Chronicle of armoured combat vehicles

The history of the tank includes all vehicles intended to advance under enemy fire while remaining protected.

<span class="mw-page-title-main">Panzer IV</span> German WWII medium tank

The Panzerkampfwagen IV, commonly known as the Panzer IV, is a German medium tank developed in the late 1930s and used extensively during the Second World War. Its ordnance inventory designation was Sd.Kfz. 161.

Panzer VIII<i> Maus</i> WWII German super-heavy tank

Panzerkampfwagen VIII Maus is a German World War II super-heavy tank completed in July of 1944. It is the heaviest fully enclosed armored fighting vehicle ever built. Five were ordered, but only two hulls and one turret were completed, the turret being attached before the testing grounds were captured by advancing Soviet military forces.

<span class="mw-page-title-main">Char 2C</span> French super-heavy tank

The Char 2C, also known as the FCM 2C, was a French post WWI heavy tank landship, later considered a super-heavy tank. It was developed during World War I but not deployed until after the war. It was, in total volume or physical dimensions, the largest operational tank ever made.

<span class="mw-page-title-main">Tortoise heavy assault tank</span> British assault gun design/prototype

The Tortoise heavy assault tank (A39) was a British heavy assault gun design developed during the Second World War, but never put into mass production. It was developed for the task of clearing heavily fortified areas such as the Siegfried Line and as a result favoured armour protection over mobility.

<span class="mw-page-title-main">Conqueror (tank)</span> British heavy tank

The FV 214 Conqueror, also known as tank, heavy No. 1, 120 mm gun, Conqueror was a British heavy tank of the post-World War II era. It was developed as a response to the Soviet IS-3 heavy tank. The Conqueror's main armament, an L1 120 mm gun, was larger than the 20-pounder (83.4 mm) gun carried by its peer, the Centurion. The Conqueror's role was to provide long range anti-tank support for the Centurion. Nine Conquerors were issued for each regiment in Germany, usually grouped in three tank troops. In the British Army both the Conqueror and the Centurion were replaced by the Chieftain.

<span class="mw-page-title-main">TOG1</span> Super-heavy tank

The Tank, Heavy, TOG 1 was a prototype British super-heavy tank produced in the early part of the Second World War in the expectation that battlefields might end up like those of the First World War. It was designed so it could cross churned-up countryside and trenches. A single prototype was built, and followed by an improved model, but interest faded with the successful performance of another cross-country design, the Churchill tank, and the mobile war that was being fought.

<span class="mw-page-title-main">T-44</span> Soviet medium tank

The T-44 was a medium tank developed and produced near the end of World War II by the Soviet Union. It was the successor to the T-34, offering an improved ride and cross-country performance, along with much greater armor. Designed to be equipped with an 85 mm main gun, by the time it was fully tested the T-34 had also moved to this weapon. Both tanks offered similar performance, so introducing the T-44 was not considered as important as increasing T-34 production. Fewer than 2,000 T-44s were built, compared to about 58,000 T-34s. Although the T-44 was available by the end of the war, it was not used in any battle. It was 1 ton lighter than the T-34-85 and slightly faster. The T-44 was heavily influential on the design of the T-54/55 main battle tank, most prominently lower hull and turret profiles. Also notable was the T-44-100, a 100mm D-10T-armed prototype, which would be the same 100mm gun mounted on the T-54/55, bar some minor changes.

<span class="mw-page-title-main">Tanks in World War I</span>

The development of tanks in World War I was a response to the stalemate that developed on the Western Front. Although vehicles that incorporated the basic principles of the tank had been projected in the decade or so before the War, it was the alarmingly heavy casualties of the start of its trench warfare that stimulated development. Research took place in both Great Britain and France, with Germany only belatedly following the Allies' lead.

<span class="mw-page-title-main">Austin Armoured Car</span> British WWI armoured vehicle

The Austin armoured car was a British armoured car produced during the First World War. The vehicle is best known for its employment by the Imperial Russian Army in the First World War and by different forces in the Russian Civil War.

<span class="mw-page-title-main">FCM F1</span> French super-heavy tank project

The FCM F1 was a French super-heavy tank developed during the late Interbellum by the Forges et Chantiers de la Méditerranée (FCM) company. Twelve were ordered in 1940 to replace the Char 2C, but France was defeated before construction could begin, a wooden mock-up being all that was finished. The FCM F1 was large and elongated, and had two turrets: one in front and one in the back, with a single high-velocity gun in each turret. The rear turret was superfiring, meaning it was raised higher and fired over the top of the forward one, a common practice in naval vessels. The vehicle was intended to be heavily armoured. Its size and protection level made it by 1940, at about 140 tons, the heaviest tank ever to have actually been ordered for production. Despite two engines its speed would have been low. The primary purpose of the tank was to breach German fortification lines, not to fight enemy tanks. The development path of the FCM F1 was extremely complex, due to the existence of a number of parallel super-heavy tank projects with overlapping design goals, the specifications of which were regularly changed. For each project in turn several companies submitted one or more competing proposals.

<span class="mw-page-title-main">Landship</span> Large land vehicle

A landship is a large land vehicle that travels exclusively on land. Its name is meant to distinguish it from vehicles that travel through other mediums such as conventional ships, airships, and spaceships.

The Landkreuzer P. 1000 "Ratte" was a design for a 1000-ton tank to be used by Germany during World War II which may have been proposed by Krupp director Edward Grote in June 1942, who had already named it "Landkreuzer". Submitted designs and drawings of the vehicle went under the names OKH Auftrag Nr. 30404 and E-30404/1, which were presented in December 1942. The tank was planned to be 1000 tonnes, far heavier than the Panzer VIII "Maus", the heaviest tank ever built. The project gained the approval of Adolf Hitler, who had expressed interest in the development of the tank but was cancelled by Minister of Armaments Albert Speer in early 1943.

<span class="mw-page-title-main">Super-heavy tank</span> Extremely large or weighty tracked fighting vehicle

A super-heavy tank is any tank that is notably beyond the standard of the class heavy tank in either size or weight relative to contemporary vehicles.

<span class="mw-page-title-main">17pdr SP Achilles</span> British self-propelled anti-tank gun

The 17pdr SP Achilles is a British variant of the American M10 tank destroyer armed with the British Ordnance QF 17-pounder high-velocity 76.2 mm (3-inch) anti-tank gun in place of the M10's considerably less powerful 3-inch Gun M7. A total of 1,100 M10s were converted to Achilles, making it the second most numerous armoured fighting vehicle to carry the 17-pounder gun, behind the Sherman Firefly tank.