Mercedes-Benz LP-series (cubic)

Last updated

1964 Mercedes-Benz LP 1620, the original heavy-duty version Mercedes-Benz LP1620 (1964, 202 PS).jpg
1964 Mercedes-Benz LP 1620, the original heavy-duty version

Mercedes-Benz LP "cubic" cabin trucks were a series of cab-over-engine trucks first shown in 1963. They are most commonly referred to as the "Kubische Kabine" in German, referring to the squared-off appearance of the cabin. "LP" was also used on the cab-over versions of the preceding range of Mercedes-Benz trucks. The heavy- and medium-duty models had been discontinued by 1975 as the Mercedes-Benz NG range took over, while the lighter portion of the range was only replaced in 1984, by the new LK (Leichte Klasse, "light class"). Mercedes-Benz LP trucks also served as basis for Tata Motors cowl trucks.

Contents

History

The new LP range first appeared in 1963, along with a new naming system for Mercedes-Benz trucks as well as a new engine generation. [1] Common for all variants were strong mechanics but an unfortunate reputation for rusting quickly. Some of the early trucks equipped with the new engines also suffered problems, but these were soon rectified. [2] The cabin was designed to maximize interior space, with a low engine hump, and with large windows all around.

The naming of the trucks followed Mercedes-Benz' new naming strategy: the leading one or two digits signified the gross vehicle weight rating, with the last two digits representing the maximum power in tens of horsepowers (rounded to suit and with a leading zero if necessary). Thus, an LP608 has a total max weight of 6 tonnes (13,000 lb) and an engine producing 80 PS (59 kW), while the LP 1632 is a 16-tonne (35,000 lb) truck with about 320 PS (235 kW). The LP range proved a strong seller, with an increase of German sales for Mercedes-Benz in the heavy truck segment of 153 per cent between 1965 and 1973. [3]

Light duty

The light duty cabin, first introduced in 1965, was used for trucks with GVWs ranging from 6 to 11 tonnes (13,000 to 24,000 lb). These LPs can most easily be distinguished by their low-line grilles, with headlights mounted inside. As with all of the Cubic cabs, they did not have a tilting cabin, both to save costs and to make it more safe in crashes. A series of hatches and doors were to provide access, but the trucks were complicated to service. Only a short daycab was on offer, although independent bodybuilders were at hand to provide any other layouts. The first version introduced was the LP 608, equipped with the 80 PS (59 kW) OM 314 diesel engine. [2] There was also a 7.5-tonne (17,000 lb) version, as well as 8.0-and-8.5-tonne (17,600 and 18,700 lb) ones. In 1969 nine-tonners appeared, fitted with the six-cylinder OM 352 engine with either 110 or 130 PS (81 or 96 kW). The LP 608 was also the first truck to leave the production line in Daimler-Benz newly constructed plant in Wörth. [4]

In 1977 the light range was thoroughly modernized, with a smoothed out cabin and a new grille. [5] The headlights were now mounted below the body, in the front bumper. A version with an air-sprung rear axle was also added. [5] The cabin remained fixed, in a segment where most competitors had moved on to tilting cabs. New ten and eleven tonne models were added, while the output of the smallest OM 314 engine crept up to 85 PS (63 kW). The light portion of the range outlived its heavier counterparts, remaining in production until 1984. [2]

Medium duty

Mercedes-Benz LP 1217 Mercedes LP1217 Doppelkabine.jpg
Mercedes-Benz LP 1217

The medium-duty models in the range had GVWs between 8 and 22 tonnes (18,000 and 49,000 lb). A different door arrangement was shared with the heaviest part of the range, while the grille was taller. The headlamps were mounted in the lower half of the grille. Introduced in 1965, it was fully replaced by the Mercedes-Benz NG in 1976. In 1965 a 200 mm (7.9 in) longer cabin with room for two berths was also introduced. [6] The non-tilting cabin required a large number of hatches and doors for access to the mechanical parts, which earned the model the less than flattering nickname "Advent Calendar." [6] The lighter models received the 5675 cc six-cylinder OM 352 engine with either 100, 110 or 126 PS (74, 81 or 93 kW), [7] while the heavier ones received the 7980 cc OM 327 with 160 PS (118 kW). [8]

When the heavier range was facelifted in 1970, the middleweights received mechanical upgrades and new weight ratings, but the appearance remained mostly the same. Some more powerful engines were also introduced, as in the LP 1519's 8720 cc OM 360 with 192 PS (141 kW). [6]

Heavy duty

The heavy-duty models were the first to be introduced, in late 1963. They have GVWs between 14 and 22 tonnes (31,000 and 49,000 lb). Their cabin is similar to that of the later middleweight trucks, although the oval headlamps were mounted in the bumper beneath the body. They were fairly spartanly equipped, in particular the absence of a suspended seat. Mercedes-Benz countered with a suspended cabin, but this was often not enough to provide driver comfort in practice. [9] Much of the technology was adapted from the preceding L/LP series, including the 200 PS (147 kW) OM 326 diesel straight-six. [10] In 1964 this was replaced with the all-new 210 PS (154 kW) OM 346 direct injection diesel, an engine that ran smoother and was more durable (after some early problems). [10] Outputs soon crept up to 230 PS (169 kW) and then to 240 PS (177 kW) to meet new regulations which took effect on 1 May 1965. An overall weight of 38 tonnes (84,000 lb) for tractor-trailers coupled with the minimum 6 PS/tonne (max 373 lb/hp) made this necessary.

From 1 January 1972, the minimum power requirement increased to 8 PS/tonne (max 280 lb/hp). Mercedes-Benz responded with a new generation of diesel engines in a V-layout. These, however, required a tilting cabin and thus the heavy trucks were finally thus equipped. A 320 PS (235 kW) V10 OM 403 was enough for the heaviest loads, while a 256 PS (188 kW) V8 was perfect for the 32 tonnes (71,000 lb) category. The 1970 LP-series received new doors that went down deeper, eliminating the exposed steps and many of the various hatches. [3] The roof was higher, and the front turn signals moved outwards so as to be visible from the sides of the truck. The smaller versions continued with the old cab. The heaviest models featured a lot of parts that were developed for the succeeding New Generation trucks, and are sometimes called the "Between Generation" (Zwischen-Generation). Towards the end of production of the V10 trucks, they received newly developed planetary axles as the earlier designs could not quite handle the V10's torque. [3]

Engines

Related Research Articles

<span class="mw-page-title-main">Unimog</span> Range of tractors and lorries made by Daimler AG

The Unimog is a range of multi-purpose tractors, trucks and lorries that has been produced by Boehringer from 1948 until 1951, and by Daimler Truck since 1951. In the United States and Canada, the Unimog was sold as the Freightliner Unimog.

<span class="mw-page-title-main">Mercedes-Benz Atego</span> Motor vehicle

The Mercedes-Benz Atego is a range of general-purpose rigid trucks introduced by Daimler Truck in 1998. A new model was introduced in 2004, followed by a facelift in 2010 and another new model in 2013. The latest version is available in gross vehicle weights of 6.5 to 16 tonnes (t) and is powered by a straight 4- or 6-cylinder engine.

<span class="mw-page-title-main">Opel Blitz</span> Motor vehicle

Opel Blitz was the name given to various light and middle-weight trucks built by the German Opel automobile manufacturer between 1930 and 1975. The original logo for this truck, two stripes arranged loosely like a lightning symbol in the form of a horizontally stretched letter "Z", still appears in the current Opel logo. The Blitz name was then applied to the British-made Bedford CF when it replaced the Blitz in certain markets.

The Mercedes-Benz MB100 is a light commercial cabover van (M) made by Mercedes-Benz España S.A. from 1981 to 1996 at their Vitoria-Gasteiz factory in northern Spain. The third generation model was manufactured by SsangYong alongside the rebadged SsangYong version from 1995 to December 2003 in South Korea, with another rebadged variant manufactured by Maxus of SAIC Motor from 2009 to 2014 in China.

<span class="mw-page-title-main">Mercedes-Benz TN</span> Motor vehicle

In 1977 Mercedes-Benz introduced a new van/truck, called T1 internally. Other designations were series TN / T1N and Bremer Transporter, since the vehicle was built in the Transporter-Plant in Bremen, Germany, first. In the years 1983/1984 production went - piece by piece - to the Transporter-Plant-Düsseldorf. The internal chassis-designations are: 601, 602 and 611.

<span class="mw-page-title-main">Isuzu Elf</span> Medium duty truck

The Isuzu Elf is a medium duty truck produced by Isuzu since 1959. Outside Japan it is known as N series and Q Series. The range was originally mainly available in Japan and other Asian countries. Australia was another important market for the Elf and N series – to the extent that it was manufactured there from the 1970s using many local components. Since the early 1980s, it has also been sold and built in the United States, and also as the Isuzu N-Series. Only North America receives the wide-cab version, competing with the Avia D90/D120, Hino Dutro, Hyundai HD65/HD72/HD78, Iveco Daily, Mazda Titan, Mercedes-Benz Vario, Mitsubishi Fuso Canter, Nissan Atlas, Renault D-Truck, Tata LPT 613, Toyota Dyna, and the ГАЗ-3310 Валдай.

<span class="mw-page-title-main">Volkswagen Crafter</span> Van manufactured by Volkswagen

The Volkswagen Crafter, introduced in 2006, is the largest three- to five-ton van produced and sold by the German automaker Volkswagen Commercial Vehicles. The Crafter officially replaced the Volkswagen Transporter LT that was launched in 1975, although it is known as the LT3, its production plant code.

<span class="mw-page-title-main">Mercedes-Benz short-bonnet trucks</span> Motor vehicle

The Mercedes-Benz "Kurzhauber" (short-bonnet) truck is a conventional layout, cab-after-engine truck manufactured from 1959 to present day (2022). In Germany it is most commonly referred to as the Kurzhauber. The engine intruded into the cabin underneath the windshield, all in the name of making a shorter truck to meet the strict period German regulations on overall length. The short-bonnet truck was built in many countries and remains in service throughout many of the regions to which it was exported.

<span class="mw-page-title-main">Ford L series</span> Motor vehicle

The Ford L-series is a range of heavy-duty trucks that were assembled and marketed by Ford between 1970 and 1998. Ford had been producing their "Heavy Duty" trucks since 1948 and their "Super Duty" lineup since 1958 marketed by various GVW ratings. Truck weight classifications 1-8 were a new concept brought about by the DOT National Highway Administration. The first dedicated Class 8 truck produced by the company, the L-series range replaced the F-series "Super Duty" and N-series. Produced as both straight trucks and semitractors, the Ford L-series encompassed a wide range of models through the Class 6-8 GVWR ratings in medium-duty, severe-service, and vocational applications. The line would become one of the most popular series of trucks Ford ever produced.

<span class="mw-page-title-main">BharatBenz</span> Brand of Daimler India Commercial Vehicles

BharatBenz is a brand of Daimler India Commercial Vehicles (DICV), itself a wholly owned subsidiary of the German manufacturer Daimler Truck AG. The brand is known for its trucks and buses. The headquarters of BharatBenz is at Oragadam, Chennai, India.

<span class="mw-page-title-main">Mercedes-Benz NG</span> Motor vehicle

The "New Generation“ is a series of trucks by Daimler-Benz built from 1973 to 1988. It was then replaced by the Mercedes-Benz SK series. With the "New Generation", Daimler-Benz expanded its market position in the medium and heavy truck segments. Its cab was also used by Mercedes-Benz of North America, who confusingly offered it with inline-six or -five engines as the LP series beginning in 1985.

<span class="mw-page-title-main">Mercedes-Benz Arocs</span> Motor vehicle

The Mercedes-Benz Arocs is a heavy-duty truck, introduced by Mercedes-Benz in 2013.

<span class="mw-page-title-main">Sisu Polar</span> Motor vehicle

Sisu Polar is a truck model series produced by the Finnish heavy vehicle producer Sisu Auto. It came into the market in 2011 and the main applications are earthmovers, logging trucks, road maintenance vehicles, mobile cranes and heavy machinery hauliers which are fully equipped in the factory. The series includes two main variants DK12M and DK16M. The number of axles is 3, 4 or 5. Mercedes-Benz supplies some key components; cabins and engines in particular.

<span class="mw-page-title-main">Iveco Zeta</span> Motor vehicle

The Iveco Zeta is a light to medium-duty truck model produced by the Italian manufacturer Iveco. Appearing in 1976 and entering production in 1977, its cab was developed with the aid of Fiat's wind tunnel in Orbassano. The Zeta series continued the lineage begun with the 1959 introduction of the OM Lupetto. The Lupetto, as well as the Leoncino, the Daino, and the Tigrotto, were all replaced by the OM X-series in 1972, which then formed the basis for the Zeta range. The Zeta itself was replaced by the all-new Iveco Eurocargo in 1991.

<span class="mw-page-title-main">Unimog 406</span> Motor vehicle

The Unimog 406 is a vehicle of the Unimog-series by Mercedes-Benz. A total of 37,069 units were manufactured by the Daimler-Benz AG in the Unimog plant in Gaggenau from 1963 to 1989. The 406 was the first medium duty Unimog, having a larger wheelbase of 2380 mm and more than twice the engine power of the Unimog 401. Unlike the initial Unimog, the 406 does not have a car engine but a heavy duty truck engine instead. Several following Unimog versions were based on the 406. There were eleven different types made of the Unimog 406, which were available in four models with a closed two-door or four-door cab, as Cabrio and as an OEM part. During its long production period, the 406 received several technical refinements. In 1964, the precombustion chamber diesel engine OM 312 was replaced with the direct injected OM 352. Disc brakes followed in 1973. For many enthusiasts, the Unimog 406 represents the classical Unimog, having agricultural and silvicultural applications. It was successful and the best embodiment of the word Universal-Motor-Gerät considering all prior Unimogs.

<span class="mw-page-title-main">Mercedes-Benz N1300</span> Motor vehicle

The Mercedes-Benz N1300 is a light commercial vehicle designed and manufactured by the Spanish subsidiary IMOSA based in Vitoria-Gasteiz, in the Basque Country, north of Spain. Its body had its roots in the Fissore-designed DKW F1000 L van of 1963.

The Toyota FA and BA were heavy duty trucks introduced in February 1954. They were facelifted versions of the earlier BX/FX trucks, retaining those trucks Type B and Type F six-cylinder petrol engines. The first letter in the model name indicates the engine family fitted; in 1957 the Type D diesel engine was introduced in a model known as the DA. The second letter indicated the size of the truck, with shorter medium duty versions being coded BC/FC/DC. A second letter "B" was used on bus versions of this chassis. A second generation FA/DA was introduced in 1964 and was built in Japan until 1980, when Hino replaced Toyota's heavier truck lines entirely. The DA, however, was also built in numerous other countries and manufacture continued into the first decade of the 21st century.

<span class="mw-page-title-main">Mercedes-Benz MB700</span> Motor vehicle

The Mercedes-Benz MB700 is a medium sized cab-over truck designed and produced by PT German Motor Manufacturing in Indonesia since June 1994. The MB700 was intended specifically for Asian markets. Its rough road capabilities also made it suitable for sale across Africa and the Middle East and it ended up being assembled and sold in several additional countries. Turkish assembly, by Mercedes-Benz Türk A.Ş, commenced in June 1996. This was also the time that the facelifted MB800 model arrived. The truck was discontinued in 2002.

<span class="mw-page-title-main">Unimog 405</span> Motor vehicle

The Unimog 405 is a vehicle of the Unimog-series by Mercedes-Benz, made by Daimler Truck Holding AG. Developed in the 1990s, the Unimog 405 has been in production since 2000. Originally, DaimlerChrysler produced the Unimog at Gaggenau; in 2002, production was moved to Wörth am Rhein. The Unimog 405 is the implement carrier version of the Unimog and the successor to most previous Unimogs. Although retaining many characteristics typical of the Unimog, the 405's axle and chassis design concept with contral artms instead of torque tubes marks a "paradigmatic change" in Unimog design.

References

  1. Heide, Stephan (December 2015). "Kubische Funktion" [Cubic function]. Last & Kraft (in German). Vol. 24, no. 1 (December/Januar 2016). Mainz, Germany: Vereinigte Fachverlage. p. 9. ISSN   1613-1606.
  2. 1 2 3 Heide, p. 12
  3. 1 2 3 Heide, p. 13
  4. "Production plant in Wörth: start-up with light-duty trucks". Daimler Global Media Site. Daimler AG. 2017-03-03. Archived from the original on 2017-08-15.
  5. 1 2 Heide, p. 14
  6. 1 2 3 Heide, p. 15
  7. Daimler-Benz Typ LP 810 (PDF) (VDA Datenblatt) (in German), December 1965, 14.800
  8. Daimler-Benz Typ LP 1216 (PDF) (VDA Datenblatt) (in German), December 1966, 14.1250
  9. Heide, p. 10
  10. 1 2 Heide, p. 11