Midwest Questar Arrowstar

Last updated

Questar Arrowstar
Role Ultralight aircraft
National origin United States
Manufacturer Midwest Engineering
RetiredPlans no longer available as of 29 June 2000
Number built60 (1998)

The Midwest Questar Arrowstar is an American ultralight aircraft that was designed and produced by Midwest Engineering of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans were withdrawn on 29 June 2000. [1] [2]

Contents

Design and development

The Questar Arrowstar was designed to comply with the US FAR 103 Ultralight Vehicles rules, including the category's maximum empty weight of 254 lb (115 kg). The aircraft has a standard empty weight of 230 lb (104 kg). [1]

The aircraft features a strut-braced high-wing, a single-seat open cockpit without a windshield, fixed tricycle landing gear without wheel pants and a single engine in tractor configuration. [1]

The Questar Arrowstar is made from bolted-together 6061-T6 aluminum tubing, with its flying surfaces covered in doped aircraft fabric. Its 27.25 ft (8.3 m) span wing has a wing area of 130.0 sq ft (12.08 m2), is supported by "V" struts and the wing can be detached in ten minutes for ground transport or storage. The acceptable power range is 30 to 40 hp (22 to 30 kW) and the standard engines used are small 30 hp (22 kW) two-stroke powerplants. [1]

The aircraft has a typical empty weight of 230 lb (100 kg) and a gross weight of 450 lb (200 kg), giving a useful load of 220 lb (100 kg). With full fuel of 3 U.S. gallons (11 L; 2.5 imp gal) the payload for the pilot and baggage is 202 lb (92 kg). [1]

The standard day, sea level, no wind, take off distance with a 30 hp (22 kW) engine is 100 ft (30 m) and the landing roll is 80 ft (24 m). [1]

The manufacturer estimated the construction time from the supplied plans as 80 hours. [1]

Operational history

By 1998 the company reported that 170 sets of plans had been sold and that 60 aircraft were completed and flying. [1]

Specifications (Questar Arrowstar)

Data from AeroCrafter [1]

General characteristics

Performance

Related Research Articles

The US Aviation CAVU is an American high-wing, strut-braced, single-seat, open cockpit, single engine in pusher configuration, ultralight aircraft that was designed and produced by AeroDreams of Manchester, Tennessee, but marketed by US Aviation of St Paul, Minnesota under their brand name. The aircraft was supplied as a kit for amateur construction.

The Hovey Delta Bird is an American ultralight aircraft that was designed by Bob Hovey in 1982 and supplied as plans for amateur construction.

The Worldwide Ultralite Spitfire is an American ultralight aircraft that was designed by Fred Bell and manufactured by Worldwide Ultralite Industries and later by Don Ecker and Air Magic Ultralights of Houston, Texas. The aircraft was supplied as a kit for amateur construction.

The Norman Aviation Nordic II is a Canadian advanced ultralight aircraft, designed by Jacques Norman and produced by Norman Aviation of Saint-Anselme, Quebec, first flying in 1986. The aircraft is supplied as a kit for amateur construction or as a complete ready-to-fly-aircraft and remained in production through 2012.

The Adventure Air Adventurer is a family of American homebuilt amphibious flying boats that was designed and produced by Adventure Air of Berryville, Arkansas. When it was available the aircraft was supplied as a kit for amateur construction. The company appears to be out of business.

The AeroLites AeroMaster AG is an American homebuilt agricultural aircraft, designed and produced by AeroLites of Welsh, Louisiana. The aircraft is supplied as a kit for amateur construction.

The Butterfly Banty, also called the Kimbrel Banty for its designer, is an American homebuilt ultralight aircraft that was designed by Mike Kimbrel and produced by Butterfly Aero of Oakville, Washington, introduced in 1984. The aircraft was supplied in the form of plans for amateur construction.

Early Bird Jenny American homebuilt aircraft

The Early Bird Jenny is an American homebuilt aircraft that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of Erie, Colorado, also by Leading Edge Airfoils of Peyton, Colorado. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

The Laron Wizard is an American homebuilt aircraft produced by Laron Aviation Tech of Borger, Texas. When it was available the aircraft was supplied as a kit for amateur construction.

The Las Brisas Mohawk is an American homebuilt aircraft that was designed and produced by Las Brisas Sales of Ozark, Missouri. When it was available the aircraft was supplied in the form of plans for amateur construction.

The Midwest Questar Open Aire is an American ultralight aircraft that was designed and produced by Midwest Engineering of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans were withdrawn on 29 June 2000.

The Midwest Questar Sport is an American ultralight aircraft that was designed and produced by Midwest Engineering of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans were withdrawn on 29 June 2000.

The Midwest Questar XLS is an American ultralight aircraft that was designed and produced by Midwest Engineering of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans were withdrawn on 29 June 2000.

Olympic Desert Eagle

The Olympic Desert Eagle was an American homebuilt aircraft that was designed and produced by Olympic Ultralights of Port Angeles, Washington. When it was available the aircraft was supplied as a kit for amateur construction.

The St Croix Pietenopol Aircamper is an American homebuilt aircraft, an adaptation of the classic 1920s Pietenpol Air Camper, re-designed by St Croix Aircraft of Corning, Iowa. When it was available the aircraft was supplied as a partial kit and in the form of plans for amateur construction.

The Theiss Speedster is an American Homebuilt ultralight biplane that was designed and produced by Theiss Aviation of Salem, Ohio. When it was available the aircraft was supplied as a quick-build kit for amateur construction.

The Mathews Mr Easy is an American homebuilt aircraft that was designed by Lyle Mathews and associates and produced by the Vintage Ultralight and Lightplane Association of Marietta, Georgia. It was the sixth and final design of Mathews. The aircraft is supplied in the form of plans for amateur construction.

The Vintage Ultralight SR-1 Hornet is an American homebuilt aircraft produced by the Vintage Ultralight and Lightplane Association of Marietta, Georgia, introduced in the early 1980s. The aircraft was supplied in the form of plans for amateur construction, although plans are no longer available.

The Parascender I, originally just called the Parascender, is an American single-seat powered parachute that was designed and produced by Parascender Technologies of Kissimmee, Florida and introduced in 1989. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Vancil Spitz S1 is an American homebuilt aircraft that was designed and produced by A. Vancil of Belton, South Carolina, introduced in the late 1990s. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.

References

  1. 1 2 3 4 5 6 7 8 9 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 208. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  2. ↑ Midwest Engineering (June 29, 2000). "Questar Ultralight Aircraft Plans" . Retrieved January 19, 2014.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.