Midwest Zodiac Talon-Turbine

Last updated

Zodiac Talon-Turbine
Role Helicopter
National origin United States
Manufacturer Midwest Engineering & Design
StatusPlans no longer available (2015)
Number builtat least 15

The Midwest Zodiac Talon-Turbine is an American helicopter that was designed and produced by Midwest Engineering & Design of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans are no longer advertised for sale. [1]

Contents

Design and development

The Zodiac Talon-Turbine was designed to comply with the US Experimental - Amateur-built aircraft rules. It features a single 25 ft (7.6 m) diameter two-bladed main rotor, a two-bladed tail rotor, a two-seats-in side-by-side configuration enclosed cockpit with a bubble canopy, and skid-type landing gear. The acceptable power range is 95 to 225 hp (71 to 168 kW) and the standard engine used is a Sunstrand 190 hp (142 kW) turboshaft powerplant. [1]

Rotor dynamic components can be sourced from commercially produced products for other helicopter models, including the Hughes 300, Robinson R22 and Rotorway Exec. [1]

The aircraft fuselage is made from a combination of steel, aluminum and composite material. The aircraft has an empty weight of 600 lb (272 kg) and a gross weight of 1,425 lb (646 kg), giving a useful load of 825 lb (374 kg). With full fuel of 48 U.S. gallons (180 L; 40 imp gal) the payload for crew and baggage is 500 lb (227 kg). The cabin width is 42 in (107 cm). [1]

The manufacturer estimated the construction time from the plans as 1100 hours. [1]

Operational history

By 1998 the company reported that 400 sets of plans had been sold and 15 aircraft were completed and flying. The prototype was reported to have 1200 hours on it flying overseas in the agricultural aircraft role. [1]

By March 2015 no examples had been registered in the United States with the Federal Aviation Administration. [2]

Specifications (Zodiac Talon-Turbine)

Data from Purdy [1]

General characteristics

Performance

See also

Related Research Articles

Brock KB-3

The Brock KB-3 is an American autogyro that was designed by Ken Brock, produced by Ken Brock Mfg and introduced in 1985. The aircraft was supplied as a kit for amateur construction and was also available as plans.

RotorWay A600 Talon American helicopter

The RotorWay A600 Talon is an American helicopter, designed and produced by RotorWay International of Chandler, Arizona. The aircraft is supplied as a kit for amateur construction.

The Amax Sport 1700 is an Australian homebuilt aircraft that was designed and produced by Amax Engineering of Donvale, Victoria. When it was available the aircraft was supplied as a kit or in the form of plans for amateur construction.

Brutsche Freedom 40 American homebuilt aircraft design

The Brutsche Freedom 40 was an American homebuilt aircraft that was designed by Neal H. Brutsche and produced by Brutsche Aircraft Corporation of Salt Lake City, Utah. The aircraft was intended to be supplied in the form of plans for amateur construction, with a partial kit available.

The Midwest Questar Open Aire is an American ultralight aircraft that was designed and produced by Midwest Engineering of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans were withdrawn on 29 June 2000.

The Midwest Questar XLS is an American ultralight aircraft that was designed and produced by Midwest Engineering of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans were withdrawn on 29 June 2000.

The Midwest Questar Arrowstar is an American ultralight aircraft that was designed and produced by Midwest Engineering of Overland Park, Kansas. When it was available the aircraft was supplied in the form of plans for amateur construction, but the plans were withdrawn on 29 June 2000.

Sauser P6E

The Sauser P6E is an American homebuilt aircraft that was designed and built by Donald Sauser of Tustin, California. The aircraft is an 82% scale reproduction of the 1920s Curtiss P-6 Hawk. When it was available the aircraft was supplied in the form of plans for amateur construction by the Sauser Aircraft Company.

The Time Warp Spitfire Mk V is an American homebuilt aircraft that was designed and produced by Time Warp Aircraft of Lakeland, Florida, introduced in 1996 at Sun 'n Fun. When it was available the aircraft was supplied as a kit for amateur construction.

The Air Command Commander Sport is an American autogyro that was designed and produced by Air Command International of Wylie, Texas. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The American Sportscopter Ultrasport 331 is an American helicopter that was designed and produced by American Sportscopter of Newport News, Virginia. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The American Sportscopter Ultrasport 496 is an American helicopter that was designed and produced by American Sportscopter of Newport News, Virginia. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

Eagles Perch

The Eagle's Perch was an American helicopter that was designed by the Nolan brothers and produced by Eagle's Perch Inc. of Carrollton, Virginia. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Vortech Skylark is an American helicopter produced by Vortech of Fallston, Maryland. The aircraft is supplied in the form of plans for amateur construction. Vortech also supplies rotor blades for the design.

The Vortech A/W 95 is an American helicopter that was designed by Adams-Wilson as the Adams-Wilson Choppy and now produced in an improved version by Vortech of Fallston, Maryland. The aircraft is supplied in the form of plans for amateur construction. Vortech also supplies rotor blades and other key parts for the design.

Vortech Meg-2XH Strap-On American homebuilt helicopter

The Vortech Meg-2XH Strap-On is an American helicopter that was designed and produced by Vortech of Fallston, Maryland. Now out of production, when it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction. Vortech also supplied rotor blades for the design.

The Hillberg EH1-01 RotorMouse is an American helicopter that was designed by Donald Gene Hillberg and produced by Hillberg Helicopters of Fountain Valley, California, first flying in 1993. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

Pawnee Warrior Light experimental helicopter

The Pawnee Warrior was an American helicopter that was designed and produced by Pawnee Aviation of Longmont, Colorado. Now out of production, when it was available the aircraft was supplied as a kit for amateur construction.

The Showers Skytwister Choppy is an American helicopter that was produced by Showers-Aero of Milton, Pennsylvania, introduced in 1992. Now out of production, when it was available the aircraft was supplied in the form of CAD plans for amateur construction.

The Windspire Aeros is an American helicopter that was designed and produced by Windspire Inc. of Long Green, Maryland. Now out of production, when it was available the aircraft was supplied in the form of plans for amateur construction.

References

  1. 1 2 3 4 5 6 7 Purdy, Don: AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition, page 326. BAI Communications, 15 July 1998. ISBN   0-9636409-4-1
  2. ↑ Federal Aviation Administration (April 1, 2015). "Make / Model Inquiry Results" . Retrieved April 1, 2015.
This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.