Model 1840 light artillery saber

Last updated
Model 1840 light artillery saber
Type Saber
Place of origin United States of America
Service history
Used by United States Army
Production history
Manufacturer Ames Manufacturing Company
Specifications
Length42 in (110 cm)
Blade length32.25 in (81.9 cm)

Blade  typeCurved, single-edged
Hilt  typeBrass
Scabbard/sheath Iron
References

The Model 1840 light artillery saber was a saber of about 42 inches in length with a curved, single-edged blade and iron scabbard.

Contents

History

The U.S. Model 1840 light artillery saber has a brass hilt and knuckle-bow of about 6 inches in length, the grip wrapped in leather and bound with brass wire, and a blade of 32.25 inches in length. Unlike the Model 1840 Heavy Cavalry Saber the artillery model has no basket.

This model was one of the many weapons produced by the Ames Manufacturing Company. of Springfield (later Chicopee), Massachusetts. The design appears to be a copy of the French saber style of 1829. The mounted artillery units accompanied dragoons to provide them with more firepower. The primary weapon of the mounted artillery were their cannons. The saber was more a traditional accoutrement than a combat weapon. The fact that Ames manufactured far fewer 1840 light artillery sabers than the number of soldiers in the artillery branch attests to this.

Distinguishing features

This saber has a flat, brass handle, black leather grip wrapped in brass wire, and steel scabbard. Its slightly shorter but more steeply curved blade and single brass knuckle-bow distinguish this saber from similar cavalry designs. French versions can be distinguished from American versions by the presence of French manufacturers' marks and the lack of U.S. markings.

Related Research Articles

A sword is a bladed melee weapon intended for cutting or thrusting that is longer than a knife or dagger, consisting of a long blade attached to a hilt. The precise definition of the term varies with the historical epoch or the geographic region under consideration. The blade can be straight or curved. Thrusting swords have a pointed tip on the blade, and tend to be straighter; slashing swords have a sharpened cutting edge on one or both sides of the blade, and are more likely to be curved. Many swords are designed for both thrusting and slashing.

Sabre Type of sword used for combat on horseback

A sabre is a type of backsword with a curved blade associated with the light cavalry of the early modern and Napoleonic periods. Originally associated with Central European cavalry such as the hussars, the sabre became widespread in Western Europe in the Thirty Years' War. Lighter sabres also became popular with infantry of the early 17th century. In the 19th century, models with less curving blades became common and were also used by heavy cavalry.

<i>Dao</i> (sword) Single-edged Chinese sword primarily used for slashing and chopping

Dao are single-edged Chinese swords, primarily used for slashing and chopping. The most common form is also known as the Chinese sabre, although those with wider blades are sometimes referred to as Chinese broadswords. In China, the dao is considered one of the four traditional weapons, along with the gun, qiang (spear), and the jian, called in this group “The General of Weapons".

The talwar, also spelled talwaar and tulwar, is a type of curved sword or sabre from the Indian subcontinent.

Shashka

The shashka or shasqua, is a kind of sabre; single-edged, single-handed, and guardless backsword. In appearance, the shashka is midway between a typically curved sabre and a straight sword. It has a slightly curved blade, and can be effective for both cutting and thrusting.

Pattern 1908 cavalry sword Type of cavalry sword

The 1908 Pattern Cavalry Trooper's Sword was the last service sword issued to the cavalry of the British Army. It has been called the most effective cavalry sword ever designed, although its introduction occurred as swords finally became obsolete as military weapons. In use, it, like other thrust-based cavalry swords, is best described as a one-handed lance, due to its complete lack of utility for anything but the charge. In fact, the closely related US Model 1913 Cavalry Saber was issued with only a saddle scabbard, as it was not considered to be of much use to a dismounted cavalryman. Colonial troops, who could expect to engage in melee combat with opposing cavalry frequently carried cut and thrust swords either instead of, or in addition to, the P1908/1912.

Model 1832 foot artillery sword Short-sword

The Model 1832 foot artillery sword was a 25-inch (64 cm) short-sword with a straight, double-edged blade and brass-mounted leather scabbard.

Gothic hilted British infantry swords (1822, 1827, 1845, 1854 and 1892 patterns)

The gothic hilted swords were a family of swords carried by officers and some NCOs of the British Army between 1822 and the present day. They were primarily infantry swords, although they were also regulation pattern for some other officers such as surgeons and staff officers. The term “Gothic hilt” is derived from a perceived similarity between the curved bars of the guard and the arches found in Gothic architecture. They were elegant aesthetically pleasing weapons, although they were considered by some to be mediocre fighting swords. The weapon and its variants had a very long service life.

United States Marine Corps noncommissioned officers sword Sword

The Marine Corps noncommissioned officer's sword is a sword worn by noncommissioned officers (NCOs) and staff noncommissioned officers (SNCOs) of the United States Marine Corps. The NCO sword was adopted in 1859 and is patterned after the United States Army's foot officers' sword of 1850. The M1859 NCO sword continues service today as the Marine Corps drill and ceremonial sword. The sword's use is restricted by regulation to ceremonial occasions by an NCO or Staff NCO in charge of troops under arms or at weddings and wedding receptions where at least one of those being married is in uniform and has the rank of Corporal or higher.

Model 1913 Cavalry Saber Cavalry sword designed for US military

The Model 1913 Cavalry Sword , commonly referred to as the Patton Saber, was a cavalry sword designed for the U.S. Army by Second Lieutenant George S. Patton in 1913. Patton suggested the revision from a curved sword and edge and cutting technique to a thrusting style of attack, following his extensive training in France.

Model 1840 Cavalry Saber Saber

The Model 1840 Cavalry Saber was based on the 1822 French hussar's sabre. Unlike its replacement, the Model 1860 Light Cavalry Saber the M1840 has a ridge around its quillon, a leather grip wrapped in wire and a flat, slotted throat. It is 44in long with a 35in blade and weighs roughly 2.5 lbs.

The Pattern 1796 Light Cavalry Sabre is a sword that was used primarily by British light dragoons and hussars, and King's German Legion light cavalry during the Napoleonic Wars. It was adopted by the Prussians and used by Portuguese and Spanish cavalry.

Model 1860 Light Cavalry Saber U.S. Army cavalry sword

The Model 1860 Light Cavalry Saber is a long sword made of steel and brass, used by US cavalry from the American Civil War until the end of the Indian wars; some were still in use during the Spanish–American War. It was 41 inches (104 cm) long with a 35 by 1 in blade and weighed 2 lb 4 oz (1.0 kg) alone or 3 lb 10 oz (1.6 kg) with iron scabbard.

Model 1840 army noncommissioned officers sword Sword

The Model 1840 noncommissioned officers' sword was adopted by the United States military in 1840. Based primarily on a sword used by the French Army, the model 1840 NCO proved somewhat heavy hilted and ill balanced. For over 70 years, it was widely used by the Army; today its usage is restricted to ceremonial occasions. The sword had a 31-inch blade, a cast brass hilt resembling the more expensive wire-wrapped leather grips, and a leather scabbard rather than the steel used by cavalry troopers and officers, although some makers, such as Emerson and Silver, issued a steel scabbard rather than leather to protect from wear. Leather scabbards were phased out beginning in 1868.

1796 Heavy Cavalry Sword

The pattern 1796 Heavy Cavalry Sword was the sword used by the British heavy cavalry, and King's German Legion Dragoons, through most of the period of the Revolutionary and Napoleonic Wars. It played an especially notable role, in the hands of British cavalrymen, at the battles of Salamanca and Waterloo. The pattern was adopted by Sweden and was used by some Portuguese cavalry.

West Point Cadets Sword

The West Point Cadets' Sword is issued to cadet officers of the United States Military Academy at West Point, New York for wear when the uniform is designated as "under arms," to include formal functions, drill, parades, inspections and graduation. The swords are issued to cadets in their First Class (4th) year, and are returned to the Academy upon separation, although Cadets have the option of buying their saber or purchasing a newly made one. Despite its straight blade and lack of a knuckle guard, it is referred to by USMA staff and cadets as a "saber," likely because the commands for its manual of arms utilize that term as the command of execution

Mark I trench knife WW1 era American combat knife

The Mark I trench knife is an American trench knife designed by officers of the American Expeditionary Force (AEF) for use in World War I. It has a 6.75 in (17.1 cm) double-edged dagger blade useful for both thrusting and slashing strokes, unlike previous U.S. trench knives such as the M1917 and M1918. The handle is made of cast bronze and uses a conical steel nut to hold the blade in place. The Mark I's blade was blued with a black oxide finish, the bronze handle was chemically blackened, with cast spikes on the bow of each knuckle. The spikes were intended to prevent an opponent from grabbing the knife hand, as well as to provide a more concentrated striking surface when employed in hand-to-hand combat.

Degen (SS) Dress sword

The SS-Ehrendegen, also SS-Degen, is a straight dress sword that was worn with a German SS uniform from 1935 to 1945. First introduced in 1935, the SS sword was designed by Karl Diebitsch, Heinrich Himmler's personal referent on art and design within the SS. It was originally manufactured by the Peter Dan. Krebs firm of Solingen, Germany.

Mughal weapons

Mughal weapons significantly evolved during the ruling periods of Babur, Akbar, Aurangzeb and Tipu Sultan. During its conquests throughout the centuries, the military of the Mughal Empire used a variety of weapons including swords, bows and arrows, horses, camels, elephants, some of the world's largest cannons, muskets and flintlock blunderbusses.

The Pattern 1831 sabre for General Officers is a British army pattern sword prescribed for the use of officers of the rank of major-general and above. It has been in continuous use from 1831 to the present. It is an example of a type of sword described as a mameluke sabre.