10-pounder Parrott rifle

Last updated

10-pounder Parrott rifle
Gettysburg PA 10pdr Parrott Little Round Top.jpg
10-pounder Parrott rifle at Little Round Top, Gettysburg National Military Park
TypeRifled cannon
Place of originUnited States
Service history
In service1861–1865
Used byUnited States
Confederate States
Wars American Civil War
Production history
Designer Robert Parker Parrott
Designed1859–1860
Manufacturer West Point Foundry
Unit cost$180
Produced1861–1865
No. builtUnited States: 2.9-inch: 228–255
United States: 3.0-inch: 279
Confederate States: 80+
VariantsUnited States: 2.9-inch (1861–1862)
United States: 3.0-inch (1864–1865)
Specifications
Mass890 lb (403.7 kg)
Length74 in (1.88 m)
Crew9

Shell weight9.5 lb (4.3 kg) shell
1.0 lb (0.5 kg) charge
Caliber 2.9 in (74 mm)
3.0 in (76 mm)
Barrels1
Action Muzzle loading
Carriage900 lb (408 kg)
Muzzle velocity 1,230 ft/s (375 m/s)
Effective firing range1,850 yd (1,690 m) at 5°

The 10-pounder Parrott rifle, Model 1861 was a muzzle-loading rifled cannon made of cast iron that was adopted by the United States Army in 1861 and often used in field artillery units during the American Civil War. Like other Parrott rifles, the gun breech was reinforced by a distinctive band made of wrought iron. The 10-pounder Parrott rifle was capable of firing shell, shrapnel shell (case shot), canister shot, or solid shot. Midway through the war, the Federal government discontinued the 2.9 in (74 mm) version in favor of a 3.0 in (76 mm) version. Despite the reinforcing band, the guns occasionally burst without warning, which endangered the gun crews. The Confederate States of America manufactured a number of successful copies of the gun.

Contents

Background

Cannons needed to be strong enough to withstand the explosion that reduced the gunpowder charge to propellant gas. Bronze smoothbore cannons were in need of a larger gunpowder charge because there was windage – or space – between the shot and the barrel. Windage caused the propellant gases from the explosion to leak out, but it also reduced the stress on the gun barrel. With rifled cannon, the ammunition was designed to expand the shell so that there was no windage between the projectile and the gun barrel. This meant that a smaller gunpowder charge could hurl a rifled projectile farther, but it also meant that the gun barrel was subjected to greater stress. [1] Bronze cannons rarely burst because the metal was more ductile. Cast iron was stronger than bronze, but it was also more brittle. This made cast-iron guns more prone to burst at the breech or muzzle. [2]

In 1836, when Robert Parker Parrott was an ordnance officer in the U.S. Army, he resigned to take a job with the West Point Foundry in Cold Spring, New York. A few years before the American Civil War, gun manufacturers wrestled with problem of rifling cannons. Bronze was too soft of a metal for rifling, while cast iron was hard enough but too brittle. Parrott attempted to solve this dilemma by inventing a cast-iron rifled cannon that had a wrought-iron reinforcing band wrapped around the breech. [3] Banded guns were not rotated when manufactured, so gravity acted on the bands as they cooled, making an uneven fit. Parrott solved the problem by rotating the gun barrel during the cooling process. The gun was first developed in 1860. [4] Parrott later remarked, "I do not profess to think that they are the best gun in the world, but I think they were the best practical thing that could be got at the time". [5]

Despite the reinforcing band, the gun would burst unpredictably at the muzzle. [6] or near the trunnions. The Parrott field guns were simple for the gun crews to operate and the guns were usable even if part of the muzzle was blown off. [5] Another great advantage of the 10-pounder Parrott was its low average cost of $180 per gun barrel. Compared to this, the bronze 12-pounder Napoleon cost $550 and the 3-inch Ordnance rifle cost $350 per gun. [7] On 23 May 1861, the US government accepted the first ten 10-pounder Parrott rifles. The West Point Foundry helped the Federal war effort to such a degree that a joke made the rounds that the U.S. national emblem should be changed from an eagle to a parrot. [3] The 20-pounder Parrott rifle (with banded breech) was also employed in field artillery units, but the 10-pounder Parrott was far more commonly used. [8]

Manufacture

The West Point Foundry manufactured between 228 and 255 2.9-inch 10-pounder Parrott rifles, Model 1861 through the end of 1862. Because the Ordnance Department thoroughly trusted Robert Parrott, he acted as both gun founder and the inspecting ordnance officer, a unique arrangement. The gun barrels weighed between 884 lb (401 kg) and 917 lb (416 kg). The rifling consisted of three equally-wide lands and grooves. [3] At first the guns were equipped with a tall, thin front sight at the muzzle and a pendulum hausse rear sight on the breech. The front sight was easily damaged, so this arrangement was soon replaced by a front sight on top of the right rimbase (adjacent to the trunnion) and a brass Parrott tangent sight mounted on the right side of the wrought iron band at a two o'clock orientation. [9] On 24 September 1863, the Ordnance Board recommended that production of the 2.9-inch Parrott be halted and that existing guns be re-bored to 3-inch caliber. This decision may have been influenced by gun jams caused by accidentally loading the 2.9-inch Parrott with 3-inch ammunition. Between November 1864 and June 1865, 119 2.9-inch Parrott rifles were converted to 3-inch caliber, though none have survived. The West Point Foundry halted production of 2.9-inch Parrott rifles on 13 April 1863 and the 3-inch versions did not appear until 12 February 1864. Altogether, 279 of the new 3-inch Parrott rifles, Model 1863 were manufactured until 4 September 1865. [10]

In 1860, the West Point Foundry sold a Parrott rifle to the state of Virginia. The artillery piece was put through trials by none other than Thomas J. Jackson, a little-known Virginia Military Institute professor who later became the famous general. Impressed by its range and accuracy, Jackson gave it a glowing report, leading Virginia to order 12 more. These guns were probably of 2.9-inch caliber, but this is not certain. In any case, one of these Parrott rifles performed admirably at the Battle of Big Bethel on 10 June 1861. [9] With the outbreak of war, the Tredegar Iron Works began manufacturing a copy of the 2.9-inch Parrott rifle for the Confederacy. Tredegar produced 80 2.9-inch Parrott rifles from 18 November 1861 to 20 February 1865. [11] Other Confederate gun founders manufactured the Parrott rifles including A. B. Reading & Brother of Vicksburg, Mississippi, Street, Hungerford & Jackson of Memphis, Tennessee, and Bujac and Bennett of New Orleans. Five guns survived, but no manufacturer can be positively identified from their markings. [10]

Specifications

Closeup photo shows the reinforcing band on the breech of the 10-pounder Parrott rifle. Gettysburg PA 10pdr Parrott 2NJ.jpg
Closeup photo shows the reinforcing band on the breech of the 10-pounder Parrott rifle.

The 10-pounder Parrott rifle was a muzzle-loader. [12] It had a bore (caliber) with a diameter of 2.9 in (74 mm) and fired a projectile weighing 9.5 lb (4.3 kg). Its gun barrel was 74 in (188 cm) long and weighed about 890 lb (403.7 kg). The gunpowder charge weighed 1.0 lb (0.5 kg) and fired the projectile with a muzzle velocity of 1,230 ft/s (375 m/s) to a distance of 1,850 yd (1,692 m) at 5° elevation. [13] [note 1] The 10-pounder Parrott was manufactured with a right-hand gaining twist (increasing toward the muzzle). [3] The twist rate was one turn in 16 ft (4.9 m). [14] A smoothbore cannon's projectile typically retained only one-third of its muzzle velocity at 1,500 yd (1,372 m) and its round shot could be seen in the air. Meanwhile, a rifled projectile generally retained two-thirds of its initial velocity at 1,500 yds. and remained invisible in flight. However, a rifled projectile could become visible if the shell began to tumble out of control. Tumbling occurred when the shell failed to take the grooves inside the gun barrel or when the spin wore off in flight. [15] The unusual 2.9-inch caliber was the same as that of a smoothbore 3-pounder gun, which fired a round shot with a diameter of 2.9 inches. [16] Rifled projectiles were heavier than smoothbore shot because they were elongated. [17]

The 10-pounder Parrott rifle was mounted on the standard gun carriage for the M1841 6-pounder field gun. Because its projectile weighed more than a 6-pound round shot, the rifle's greater recoil could damage the gun carriage. [18] The 6-pounder carriage weighed 900 lb (408 kg). [19] The 10-pounder Parrott rifle fired case shot (shrapnel), common shell, and canister shot. The use of bolts (solid shot) was rare and it was generally not provided in the ammunition chests. Firing shell without the fuse would accomplish the same result as firing a solid shot from a rifled gun. [20] Parrott ammunition was designed to be used. In an emergency, 3-inch Parrott rifles could also fire Hotchkiss and Schenkl ammunition. However, experience showed that Parrott projectiles worked best in Parrott rifles while Hotchkiss and Schenkl projectiles were most effective when fired from the 3-inch Ordnance rifle. That was because the 10-pounder Parrott rifling had 3 grooves while the 3-inch Ordnance rifling had 7 grooves. In particular, the Parrott rifle's gaining twist caused the Hotchkiss projectile's soft sabot to be torn off. [21] One weakness of Parrott ammunition was the sabot's position at the projectile's base. This meant that the final impulse on the shell as it left the gun was on its base, potentially causing the shell to wobble. [22]

For two reasons, canister shot fired from rifled guns was less effective than canister fired from a 12-pounder Napoleon or a M1841 12-pounder howitzer. First, the rifled gun's 2.9-inch or 3-inch bore was narrower than the 12-pounder's 4.62 in (117 mm) bore and could hurl fewer canister balls. Second, the barrel's rifling caused the canister to be blasted in an irregular pattern. Union General Henry Jackson Hunt believed that the range of canister fired from rifled guns was only half the 400 yd (366 m) effective range of canister fired from the 12-pounder Napoleon. [23]

Federal batteries were organized with six guns of identical type early in the conflict. [24] Each 6-gun battery required fourteen 6-horse teams and seven spare horses. [25] The teams towed the six artillery pieces and limbers, six caissons, one battery wagon, and one traveling forge. Each caisson carried two ammunition chests and the limber carried one additional ammunition chest. [26] The 10-pounder Parrott rifle carried 50 rounds in each ammunition chest. [27] A memo from November 1863 specified that rifled guns should have 25 shells, 20 shrapnel (case shot), and 5 canister rounds in each ammunition chest. In March 1865, a memo recommended that each chest carry 30 shells, 15 shrapnel, and 5 canister rounds for rifled guns of the horse artillery. [20] The gun required a crew consisting of 1 sergeant, 2 corporals, and 6 gunners, while 6 drivers managed the horses. [28]

Confederate 2.9-inch Parrott Rifle Specifications (probably copied from Federal) [11]
DescriptionDimension
Diameter of the bore (caliber)2.91 in (74 mm)
Length of the bore69.875 in (177.5 cm)
Length from the rear of the knob to the muzzle78.375 in (199.1 cm)
Length from the end of the breech to the muzzle72.875 in (185.1 cm)
Length from the rear of the knob to the center of the trunnions31.5 in (80.0 cm)
Length of the wrought iron band13.0 in (33.0 cm)
Diameter of the trunnions3.69 in (94 mm)
Thickness of metal at the wrought iron band8.47 in (215 mm)
Thickness of metal forward of the wrought iron band6.09 in (155 mm)
Thickness of metal at the muzzle3.34 in (85 mm)

History

10-pounder Parrott rifle with Little Round Top in the background at Gettysburg NMP. Gettysburg PA 10pdr Parrott LRT.jpg
10-pounder Parrott rifle with Little Round Top in the background at Gettysburg NMP.

Captain Richard Waterman of Battery C, 1st Rhode Island Light Artillery, believed that the 10-pounder Parrott rifle was more accurate than the 3-inch Ordnance rifle at 900–1,500 yd (823–1,372 m) range. Union General Quincy Adams Gillmore liked the Parrott rifles, noting that untrained artillery crews could easily learn how to operate them. Confederate officer Edward Porter Alexander wanted to get rid of his 10-pounder Parrott rifles and replace them with M1841 24-pounder howitzers. [6] One artillery officer reported that the Parrott percussion shells performed very well with only two shells failing to explode out of about 30. [29]

In the First Battle of Kernstown on 23 March 1862, the Union troops temporarily under the command of Nathan Kimball included 4th U.S. Artillery, Battery E (Clark's) armed with six 10-pounder Parrott rifles. [30] At the Battle of Antietam on 17 September 1862, the number of 10-pounder Parrott rifles was 57 for the Union Army of the Potomac and at least 43 for the Confederate Army of Northern Virginia. [31] Union 10-pounder Parrott rifles were almost all massed in four or six gun batteries. [32] Meanwhile, the Confederates distributed theirs by ones, twos, or threes in mixed batteries. [33] The six-gun Union batteries included Battery B, 1st New York Light Artillery (Pettit's), Battery A, 1st Rhode Island Light Artillery (Tompkins's), Battery A, 1st New Jersey Light Artillery (Hexamer's), and Battery D, 1st Pennsylvania Light Artillery (Durell's). [34] McCarthy's Richmond Virginia battery consisted of two 10-pounder Parrott rifles and two 6-pounder field guns. [35]

At the Second Battle of Corinth on 3–4 October 1862, Battery H, 1st Missouri Light Artillery was armed with a mix of 10-pounder Parrott rifles and 24-pounder howitzers. [36] In 1862 alone, the US government ordered 270,699 Parrott projectiles. This included ammunition for Parrott rifles other than the 10-pounder. [37] On 2 July 1863 during the Battle of Gettysburg, the six 10-pounder Parrott rifles of the 5th U.S. Artillery, Battery D commanded by Captain Charles E. Hazlett took position on Little Round Top. When General Gouverneur K. Warren pointed out that the guns would not be able to fire on their attackers, Hazlett replied, "The sound of my guns will be encouraging to our troops." [38] The Parrott rifles were not used again after the end of the war. [5] In October 1865, the Chief of Ordnance stated that the frequent bursting of Parrott rifles lowered confidence in the weapon and that the Ordnance department would look for a more reliable weapon. [39]

Civil War artillery

Characteristics of American Civil War artillery pieces [40] [41]
DescriptionCaliberTube lengthTube weightCarriage weightShot weightCharge weightRange 5° elev.
M1841 6-pounder cannon3.67 in (9.3 cm)60 in (152 cm)884 lb (401 kg)900 lb (408 kg)6.1 lb (2.8 kg)1.25 lb (0.6 kg)1,523 yd (1,393 m)
M1841 12-pounder cannon4.62 in (11.7 cm)78 in (198 cm)1,757 lb (797 kg)1,175 lb (533 kg)12.3 lb (5.6 kg)2.5 lb (1.1 kg)1,663 yd (1,521 m)
M1841 12-pounder howitzer4.62 in (11.7 cm)53 in (135 cm)788 lb (357 kg)900 lb (408 kg)8.9 lb (4.0 kg)1.0 lb (0.5 kg)1,072 yd (980 m)
M1841 24-pounder howitzer5.82 in (14.8 cm)65 in (165 cm)1,318 lb (598 kg)1,128 lb (512 kg)18.4 lb (8.3 kg)2.0 lb (0.9 kg)1,322 yd (1,209 m)
M1857 12-pounder Napoleon4.62 in (11.7 cm)66 in (168 cm)1,227 lb (557 kg)1,128 lb (512 kg)12.3 lb (5.6 kg)2.5 lb (1.1 kg)1,619 yd (1,480 m)
12-pounder James rifle3.67 in (9.3 cm)60 in (152 cm)875 lb (397 kg)900 lb (408 kg) [42] 12 lb (5.4 kg)0.75 lb (0.3 kg)1,700 yd (1,554 m)
3-inch Ordnance rifle3.0 in (7.6 cm)69 in (175 cm)820 lb (372 kg)900 lb (408 kg) [19] 9.5 lb (4.3 kg)1.0 lb (0.5 kg)1,830 yd (1,673 m)
10-pounder Parrott rifle3.0 in (7.6 cm)74 in (188 cm)899 lb (408 kg)900 lb (408 kg) [19] 9.5 lb (4.3 kg)1.0 lb (0.5 kg)1,900 yd (1,737 m)
20-pounder Parrott rifle3.67 in (9.3 cm)84 in (213 cm)1,750 lb (794 kg)1,175 lb (533 kg) [42] 20 lb (9.1 kg)2.0 lb (0.9 kg)1,900 yd (1,737 m)

Notes

Footnotes
  1. Coggins (p. 77) and Johnson & Anderson (p. 24) gave the 10-pounder Parrott rifle a range of 1,900 yards at 5° elevation, while Cole (p. 298) gave it a range of 1,850 yards. The tables list 1,900 yards, while Cole's numbers are used in the Specifications section and information box.
Citations
  1. Cole 2002, p. 75.
  2. Cole 2002, p. 77.
  3. 1 2 3 4 Hazlett, Olmstead & Parks 2004, p. 109.
  4. Ripley 1984, pp. 109–110.
  5. 1 2 3 Cole 2002, p. 94.
  6. 1 2 Cole 2002, p. 93.
  7. Cole 2002, p. 83.
  8. Cole 2002, pp. 91–93.
  9. 1 2 Hazlett, Olmstead & Parks 2004, p. 110.
  10. 1 2 Hazlett, Olmstead & Parks 2004, pp. 112–113.
  11. 1 2 Hazlett, Olmstead & Parks 2004, p. 111.
  12. Johnson & Anderson 1995, p. 24.
  13. Cole 2002, p. 298.
  14. Cole 2002, p. 149.
  15. Cole 2002, p. 237.
  16. Hazlett, Olmstead & Parks 2004, p. 24.
  17. Cole 2002, p. 137.
  18. Hazlett, Olmstead & Parks 2004, p. 125.
  19. 1 2 3 Hazlett, Olmstead & Parks 2004, p. 217.
  20. 1 2 Cole 2002, p. 125.
  21. Cole 2002, p. 153.
  22. Cole 2002, p. 142.
  23. Cole 2002, pp. 130–131.
  24. Cole 2002, p. 56.
  25. Coggins 1983, p. 73.
  26. Coggins 1983, pp. 68–69.
  27. Cole 2002, p. 106.
  28. Johnson & Anderson 1995, p. 28.
  29. Cole 2002, p. 154.
  30. Cozzens 2008, p. 161.
  31. Johnson & Anderson 1995, p. 129.
  32. Johnson & Anderson 1995, pp. 35–38.
  33. Johnson & Anderson 1995, pp. 42–46.
  34. Johnson & Anderson 1995, pp. 71–77.
  35. Johnson & Anderson 1995, p. 87.
  36. Cozzens 1997, p. 164.
  37. Cole 2002, p. 155.
  38. Trudeau 2002, pp. 348–349.
  39. Katcher 2001, p. 26.
  40. Coggins 1983, p. 66.
  41. Coggins 1983, p. 77.
  42. 1 2 Johnson & Anderson 1995, p. 25.

Related Research Articles

A muzzleloader is any firearm into which the projectile and the propellant charge is loaded from the muzzle of the gun. This is distinct from the modern designs of breech-loading firearms. The term "muzzleloader" applies to both rifled and smoothbore type muzzleloaders, and may also refer to the marksman who specializes in the shooting of such firearms. The firing methods, paraphernalia and mechanism further divide both categories as do caliber.

<span class="mw-page-title-main">Parrott rifle</span> Muzzle loading artillery weapon

The Parrott rifle was a type of muzzle-loading rifled artillery weapon used extensively in the American Civil War.

<span class="mw-page-title-main">Dahlgren gun</span> American naval gun of the 19th Century

Dahlgren guns were muzzle-loading naval artillery designed by Rear Admiral John A. Dahlgren USN, mostly used in the period of the American Civil War. Dahlgren's design philosophy evolved from an accidental explosion in 1849 of a 32 lb (14.5 kg) gun being tested for accuracy, killing a gunner. He believed a safer, more powerful naval cannon could be designed using more scientific design criteria. Dahlgren guns were designed with a smooth curved shape, equalizing strain and concentrating more weight of metal in the gun breech where the greatest pressure of expanding propellant gases needed to be met to keep the gun from bursting. Because of their rounded contours, Dahlgren guns were nicknamed "soda bottles", a shape which became their most identifiable characteristic.

<span class="mw-page-title-main">Brooke rifle</span>

The Brooke rifle was a type of rifled, muzzle-loading naval and coast defense gun designed by John Mercer Brooke, an officer in the Confederate States Navy. They were produced by plants in Richmond, Virginia, and Selma, Alabama, between 1861 and 1865 during the American Civil War. They served afloat on Confederate ships and ashore in coast defense batteries operated by the Confederate States Army.

<span class="mw-page-title-main">Field artillery in the American Civil War</span>

Field artillery in the American Civil War refers to the artillery weapons, equipment, and practices used by the Artillery branch to support the infantry and cavalry forces in the field. It does not include siege artillery, use of artillery in fixed fortifications, or coastal or naval artillery. Nor does it include smaller, specialized artillery classified as small arms.

A muzzle-loading rifle is a muzzle-loaded small arm or artillery piece that has a rifled barrel rather than a smoothbore. The term "rifled muzzle loader" typically is used to describe a type of artillery piece, although it is technically accurate for small arms as well. A shoulder arm is typically just called a "rifle", as almost all small arms were rifled by the time breechloading became prevalent. Muzzle and breechloading artillery served together for several decades, making a clear distinction more important. In the case of artillery, the abbreviation "RML" is often prefixed to the guns designation; a Rifled breech loader would be "RBL", or often just "BL", since smoothbore breechloading artillery is almost nonexistent. A muzzle loading weapon is loaded through the muzzle, or front of the barrel. This is the opposite of a breech-loading weapon or rifled breechloader (RBL), which is loaded from the breech-end of the barrel. The rifling grooves cut on the inside of the barrel cause the projectile to spin rapidly in flight, giving it greater stability and hence range and accuracy than smoothbore guns. Hand held rifles were well-developed by the 1740s. A popularly recognizable form of the "muzzleloader" is the Kentucky Rifle, which was actually developed in Pennsylvania. The American Longrifle evolved from the German "Jäger" rifle.

<span class="mw-page-title-main">Siege artillery in the American Civil War</span>

Siege artillery is heavy artillery primarily used in military attacks on fortified positions. At the time of the American Civil War, the U.S. Army classified its artillery into three types, depending on the gun's weight and intended use. Field artillery were light pieces that often traveled with the armies. Siege and garrison artillery were heavy pieces that could be used either in attacking or defending fortified places. Seacoast artillery were the heaviest pieces and were intended to be used in permanent fortifications along the seaboard. They were primarily designed to fire on attacking warships. The distinctions are somewhat arbitrary, as field, siege and garrison, and seacoast artillery were all used in various attacks and defenses of fortifications. This article will focus on the use of heavy artillery in the attack of fortified places during the American Civil War.

<span class="mw-page-title-main">Wiard rifle</span>

The Wiard rifle refers to several weapons invented by Norman Wiard, most commonly a semi-steel light artillery piece in six-pounder and twelve-pounder calibers. About 60 were manufactured between 1861 and 1862 during the American Civil War, at O'Donnell's Foundry, New York City: "although apparently excellent weapons, [they] do not seem to have been very popular". Wiard also designed a rifled steel version of the Dahlgren boat howitzer, among other gun types. Further, Wiard unsuccessfully attempted to develop a 15 in (381 mm) rifled gun for the US Navy and proposed a 20 in (510 mm) gun. In 1881 he unsuccessfully proposed various "combined rifle and smoothbore" weapon conversions of Rodman guns and Parrott rifles.

<span class="mw-page-title-main">James rifle</span> Type of artillery gun

James rifle is a generic term to describe any artillery gun rifled to the James pattern for use in the American Civil War, as used in some period documentation. Charles T. James developed a rifled projectile and rifling system. Modern authorities such as Warren Ripley and James Hazlett have suggested that the term "James rifle" only properly applies to 3.8 in (97 mm) bore field artillery pieces rifled to fire James' projectiles. They contend that the term does not apply to smoothbores that were later rifled to take the James projectiles in 3.67 in (93 mm) caliber or other calibers, and that those should instead be referred to as "Rifled 6 pounder", etc. The rifle was created in 1861.

<span class="mw-page-title-main">RML 9-inch 12-ton gun</span> Naval gun

The RML 9-inch guns Mark I – Mark VI were large rifled muzzle-loading guns of the 1860s used as primary armament on smaller British ironclad battleships and secondary armament on larger battleships, and also ashore for coast defence. It should not be confused with the RML 9-inch Armstrong Gun, used by the Dutch navy, the Spanish Navy, and other navies.

A Blakely rifle is one of a series of rifled muzzle-loading cannon designed by British army officer Captain Theophilus Alexander Blakely. They were widely sold outside of the British army, and were best known for their use by the Confederate States of America during the American Civil War.

<span class="mw-page-title-main">Caliber (artillery)</span> Internal diameter of a gun barrel

In artillery, caliber or calibre is the internal diameter of a gun barrel, or, by extension, a relative measure of the barrel length.

<span class="mw-page-title-main">Sylvanus Sawyer</span> American inventor (1822–1895)

Sylvanus Sawyer was a United States inventor.

<span class="mw-page-title-main">3-inch ordnance rifle</span> Rifled cannon

The 3-inch ordnance rifle, model 1861 was a wrought iron muzzleloading rifled cannon that was adopted by the United States Army in 1861 and widely used in field artillery units during the American Civil War. It fired a 9.5 lb (4.3 kg) projectile to a distance of 1,830 yd (1,670 m) at an elevation of 5°. The 3-inch rifle was not as effective in firing canister shot as the heavier 12-pounder Napoleon, but it proved to be highly accurate at longer ranges when firing common shell or spherical case shot. There was only one reported case of a 3-inch ordnance rifle bursting in action. This was in stark contrast to the similarly-sized cast iron 10-pounder Parrott rifles which occasionally burst without warning, inflicting injury on the gun crews. The Confederate States of America lacked the technology to manufacture reliable copies of the 3-inch ordnance rifle. However, the Confederate States Army respected the weapons and employed those captured from Federal forces.

<span class="mw-page-title-main">M1841 6-pounder field gun</span> Smoothbore cannon

The M1841 6-pounder field gun was a bronze smoothbore muzzle-loading cannon that was adopted by the United States Army in 1841 and used from the Mexican–American War to the American Civil War. It fired a 6.1 lb (2.8 kg) round shot up to a distance of 1,523 yd (1,393 m) at 5° elevation. It could also fire canister shot and spherical case shot. The cannon proved very effective when employed by light artillery units during the Mexican–American War. The cannon was used during the early years of the American Civil War, but it was soon outclassed by newer field guns such as the 12-pounder Napoleon. In the US Army, the 6-pounders were replaced as soon as more modern weapons became available and none were manufactured after 1862. However, the Confederate States Army continued to use the cannon for a longer period because the lesser industrial capacity of the South could not produce newer guns as fast as the North.

<span class="mw-page-title-main">M1841 12-pounder howitzer</span> Howitzer

The M1841 12-pounder howitzer was a bronze smoothbore muzzle-loading artillery piece that was adopted by the United States Army in 1841 and employed during the Mexican–American War and the American Civil War. It fired a 8.9 lb (4.0 kg) shell up to a distance of 1,072 yd (980 m) at 5° elevation. It could also fire canister shot and spherical case shot. The howitzer proved effective when employed by light artillery units during the Mexican–American War. The howitzer was used throughout the American Civil War, but it was outclassed by the 12-pounder Napoleon which combined the functions of both field gun and howitzer. In the U.S. Army, the 12-pounder howitzers were replaced as soon as more modern weapons became available. Though none were manufactured after 1862, the weapon was not officially discarded by the U.S. Army until 1868. The Confederate States of America also manufactured and employed the howitzer during the American Civil War.

<span class="mw-page-title-main">20-pounder Parrott rifle</span> Type of rifled cannon

The 20-pounder Parrott rifle, Model 1861 was a cast iron muzzle-loading rifled cannon that was adopted by the United States Army in 1861 and employed in field artillery units during the American Civil War. As with other Parrott rifles, the gun breech was reinforced by a distinctive wrought iron reinforcing band. The gun fired a 20 lb (9.1 kg) projectile to a distance of 1,900 yd (1,737 m) at an elevation of 5°. The 20-pounder Parrott rifle could fire shell, shrapnel shell, canister shot, and more rarely solid shot. In spite of the reinforcing band, the 20-pounder earned a dubious reputation for bursting without warning, killing or injuring gunners. The Confederate States of America also manufactured copies of the gun.

<span class="mw-page-title-main">14-pounder James rifle</span> Rifled cannon

The 14-pounder James rifle or James rifled 6-pounder or 3.8-inch James rifle was a bronze muzzle-loading rifled cannon that was employed by the United States Army and the Confederate States Army during the American Civil War. It fired a 14 lb (6.4 kg) solid shot up to a distance of 1,530 yd (1,400 m) at 5° elevation. It could also fire canister shot and common shell. Shortly before the war broke out, the U.S. Army adopted a plan to convert M1841 6-pounder field guns from smoothbore to rifled artillery. Rifling the existing 6-pounders would both improve the gun's accuracy and increase the weight of the shell. There were two major types produced, both were bronze with a bore (caliber) of 3.8 in (97 mm) that would accommodate ammunition designed by Charles Tillinghast James. The first type looked exactly like an M1841 6-pounder field gun. The second type had a longer tube with a smooth exterior profile similar to a 3-inch Ordnance rifle. At first the rifles were quite accurate. However, it was discovered that the bronze rifling quickly wore out and accuracy declined. None of the rifles were manufactured after 1862, and many were withdrawn from service, though some artillery units employed the guns until the end of the war.

<span class="mw-page-title-main">M1841 24-pounder howitzer</span> Howitzer

The M1841 24-pounder howitzer was a bronze smoothbore muzzle-loading artillery piece adopted by the United States Army in 1841 and employed from the Mexican–American War through the American Civil War. It fired a 18.4 lb (8.3 kg) shell to a distance of 1,322 yd (1,209 m) at 5° elevation. It could also fire canister shot and spherical case shot. The howitzer was designed to be employed in a mixed battery with 12-pounder field guns. By the time of the American Civil War, the 24-pounder howitzer was superseded by the 12-pounder Napoleon, which combined the functions of both field gun and howitzer. The 24-pounder howitzer's use as field artillery was limited during the conflict and production of the weapon in the North ended in 1863. The Confederate States of America manufactured a few 24-pounder howitzers and imported others from the Austrian Empire.

<span class="mw-page-title-main">M1857 12-pounder Napoleon</span> Gun-Howitzer

The M1857 12-pounder Napoleon or Light 12-pounder gun or 12-pounder gun-howitzer was a bronze smoothbore muzzleloading artillery piece that was adopted by the United States Army in 1857 and extensively employed in the American Civil War. The gun was the American-manufactured version of the French canon obusier de 12 which combined the functions of both field gun and howitzer. The weapon proved to be simple to produce, reliable, and robust. It fired a 12.03 lb (5.5 kg) round shot a distance of 1,619 to 1,680 yd at 5° elevation. It could also fire canister shot, common shell, and spherical case shot. The 12-pounder Napoleon outclassed and soon replaced the M1841 6-pounder field gun and the M1841 12-pounder howitzer in the U.S. Army, while replacement of these older weapons was slower in the Confederate States Army. A total of 1,157 were produced for the U.S. Army, all but a few in the period 1861–1863. The Confederate States of America utilized captured U.S. 12-pounder Napoleons and also manufactured about 500 during the war. The weapon was named after Napoleon III of France who helped develop the weapon.

References

Further reading