The Motorcraft 2150 is a Ford (also used by AMC) 2-barrel carburetor manufactured from 1973 through 1983, [1] based heavily on its predecessor, the Autolite 2100 carburetor.
The 2150 improved on the 2100s design through the introduction of a variable air bleed system, which keeps the air to fuel mixture better balanced throughout the carburetor's full range of operation. The 2150 models from 1983 to 1986 were electronic feedback carburetors equipped with Ford's EEC-IV. [2]
Unlike the Autolite 2100, the Motorcraft 2150 was available only in two venturi sizes. Both were available in manual and automatic transmission configurations.
These 2150s were used on Ford engines up to the 302 Windsor in cubic displacement.
Ford engines commonly equipped with the 1.08 venturi 2150:
Note: The 250-I6 is derived from the Falcon line (144-170-200). U.S. versions were only available with an integral cast head and intake making them only able to accept a one-barrel carb. Foreign versions were also made with typical two-piece intake and head.
The last Ford vehicles to leave the factory with 2150 carburetors were 1986 Aerostars equipped with the 2.8 L V6.
These larger 2150s were generally used in large Ford passenger cars and trucks equipped with 335-series engines. These were also used, with the addition of an altitude compensator, on Jeep Grand Wagoneers equipped with the AMC 360 V8.
Ford engines commonly equipped with the 1.21 venturi 2150:
AMC engine equipped with the 1.2 venturi 2150 with altitude compensator:
A carburetor is a device used by an internal combustion engine to control and mix air and fuel entering the engine. The primary method of adding fuel to the intake air is through the venturi tube in the main metering circuit, however various other components are also used to provide extra fuel or air in specific circumstances.
The Ford Thunderbird is a personal luxury car produced by Ford from model years 1955 until 1997 and 2002 until 2005 across 11 distinct generations. Introduced as a two-seat convertible, the Thunderbird was produced in a variety of body configurations. These included a four-seat hardtop coupe, four-seat convertible, five-seat convertible and hardtop, four-door pillared hardtop sedan, six-passenger hardtop coupe, and five-passenger pillared coupe, with the final generation designed again as a two-seat convertible.
The AMC Javelin is an American front-engine, rear-wheel-drive, two-door hardtop automobile manufactured by American Motors Corporation (AMC) across two generations, 1968 through 1970 and 1971 through 1974 model years. The car was positioned and marketed in the pony car market segment.
The Ford FE engine is a Ford V8 engine used in vehicles sold in the North American market between 1958 and 1976. The FE was introduced to replace the short-lived Ford Y-block engine, which American cars and trucks were outgrowing. It was designed with room to be significantly expanded, and manufactured both as a top-oiler and side-oiler, and in displacements between 332 cu in (5.4 L) and 428 cu in (7.0 L).
The Ford 335 engine family was a group of engines built by the Ford Motor Company between 1969 and 1982. The "335" designation reflected Ford management's decision to produce an engine of that size with room for expansion during its development. This engine family began production in late 1969 with a 351 cu in (5.8 L) engine, commonly called the 351C. It later expanded to include a 400 cu in (6.6 L) engine which used a taller version of the engine block, commonly referred to as a tall deck engine block, a 351 cu in (5.8 L) tall deck variant, called the 351M, and a 302 cu in (4.9 L) engine which was exclusive to Australia.
The Ford 302 H.O. is a high-performance "small block" 302 cu in (4.9 L) V8 engine manufactured by Ford Motor Company. The original version of this engine was used in the 1969 and 1970 Boss 302 Mustangs and Cougar Eliminators and was constructed by attaching heads designed for the planned 351 Cleveland to a Ford small block. The construction was aided by the two engines sharing a cylinder head bolt pattern, though the Boss heads had to have their coolant passages slightly modified.
The Ford small-block is a series of 90° overhead valve small block V8 automobile engines manufactured by the Ford Motor Company from July 1961 to December 2000.
The Y-block engine is a family of overhead valve V8 automobile engines produced by Ford Motor Company. The engine is well known and named for its deep skirting, which causes the engine block to resemble a Y. It was introduced in 1954 as a more modern replacement for the outdated side-valved Ford Flathead V8 and was used in a variety of Ford vehicles through 1964.
The Chevrolet small-block engine is a series of gasoline-powered, V-8 automobile engines, produced by the Chevrolet division of General Motors between 1954 and 2003, using the same basic engine block. Referred to as a "small-block" for its size relative to the physically much larger Chevrolet big-block engines, the small block family spanned from 262 cu in (4.3 L) to 400 cu in (6.6 L) in displacement. Engineer Ed Cole is credited with leading the design for this engine. The engine block and cylinder heads were cast at Saginaw Metal Casting Operations in Saginaw, Michigan.
The Essex V6 is a 90° V6 engine family built by the Ford Motor Company at the Essex Engine Plant in Windsor, Ontario, Canada. This engine is unrelated to Ford's British Essex V6. Introduced in 1982, versions of the Essex V6 engine family were used in subcompact through to large cars, vans, minivans, and some pickup trucks. The Essex V6 was last used in the 2008 regular-cab F-150, after which it was succeeded by a version of the Ford Cyclone engine. An industrial version of the engine was available until 2015.
The Ford Motor Company produced straight-six engines from 1906 until 1908 and from 1941 until 2016. In 1906, the first Ford straight-six was introduced in the Model K. The next was introduced in the 1941 Ford. Ford continued producing straight-six engines for use in its North American vehicles until 1996, when they were discontinued in favor of more compact V6 designs.
The AMC V8 may refer to either of two distinct OHV V8 engine designs that were developed and manufactured by American Motors Corporation (AMC). The engines were used in cars and trucks by AMC, Kaiser, and International Harvester as well as in marine and stationary applications.
The Ford Mustang Mach 1 is a performance-oriented option package of the Ford Mustang muscle car, originally introduced in August 1968 for the 1969 model year. It was available until 1978, returned briefly in 2003, 2004, and most recently 2021.
The Computerized Engine Control or Computerized Emission Control (CEC) system is an engine management system designed and used by American Motors Corporation (AMC) and Jeep on 4- and 6-cylinder engines of its own manufacture from 1980 to 1990. It is one of the three major components for proper engine operation: the computer, electrically controlled carburetor, and the oxygen sensor in the exhaust system.
The Ford Fairlane is an automobile model that was sold between the 1955 and 1970 model years by Ford in North America. Taking its name from the Dearborn, Michigan estate of Henry Ford, the Fairlane nameplate was used for seven different generations of vehicles. Through its production, the model line would be marketed in a wide variety of body styles, including two-door and four-door sedans, two-door and four-door hardtops, station wagons, and both traditional and retractable-hardtop convertibles.
The Mercury Cyclone is an automobile that was marketed by the Mercury division of Ford from 1964 to 1971. Introduced in 1964 as the Mercury Comet Cyclone, the Cyclone replaced the S-22 as the performance-oriented version of the Mercury Comet model line. The Cyclone became a distinct nameplate for the 1968 model year, as the Mercury Montego was phased in to replace the Comet.
The first-generation Ford Mustang was manufactured by Ford from March 1964 until 1973. The introduction of the Mustang created a new class of automobiles known as the pony cars. The Mustang’s styling, with its long hood and short deck, proved wildly popular and inspired a host of competition.
The third-generation Mustang was produced by Ford from 1979 until 1993. Built on Ford’s Fox platform, it is commonly referred to as the Fox body Mustang. It evolved through several sub-models, trim levels, and drivetrain combinations during its production life. It underwent updates for the 1987 model year and seemed destined for replacement with a front-wheel drive Mazda platform. However, company executives were swayed by consumer opinion and the rear-wheel drive Mustang stayed, while the front-wheel drive version was renamed the Ford Probe. Enthusiasts group the generation into two segments: the 1979–1986 cars, with their quad headlight arrangement, and the 1987–1993 cars, with their aerodynamic composite headlamps and front fascia styling. Production ended with the introduction of the fourth-generation Mustang (SN-95) for the 1994 model year.
The Autolite 4300 was a Ford carburetor manufactured from 1967 through 1974. These carburetors were produced as an emissions-compliant replacement for the previous Autolite 4100 model, and were later superseded by the Motorcraft 4350.
Autolite 2100 carburetors were made from 1953 to 1973. They are a synchronous two venturi (barrel) design, meaning both venturii operate together. There are eight different sizes ranging from 190 cfm to 424 cfm. They are available with manual, electric, or automatic hot-air chokes. They incorporate a feature called Annular Fuel Discharge, which greatly reduces the likely-hood of hesitation and flat spots under acceleration. They use the standard Holley bolt pattern.