This article needs additional citations for verification .(July 2008) |
Overview | |
---|---|
Maker | Nikon |
Type | 35 mm SLR camera |
Released | 2000 |
Production | 2000-2006 |
Lens | |
Lens mount | Nikon F lens mount |
Focusing | |
Focus | TTL Phase Detection Autofocus (5 zone, center cross-type) |
Exposure/metering | |
Exposure | Program, Aperture priority, Shutter priority and depth-of-field autoexposure; manual 3D Matrix, centre-weighted; 75% of the exposure over 12 mm area, spot-metering over 4 mm |
Flash | |
Flash | 12/39 (at ISO 100, m/ft.) speedlight built in, standard Hot shoe |
Shutter | |
Frame rate | 2.5 frame/s |
General | |
Dimensions | 141.5 × 98.5 × 71 mm |
Weight | 515 g (1.135 lb) |
Made in | Thailand |
The Nikon F80 (or N80 as it is known in the U.S.) is an SLR prosumer camera manufactured by Nikon, released in January 2000.
The F80 was introduced on January 27, 2000, to the worldwide consumer market. It was the successor to the F70 and was based on the highly successful F100 with the notable lack of the weatherproofing and ruggedness that characterizes that camera.
Three versions of the F80 are available, the F80, the F80D which has a different back that can imprint date information on the frame and the F80S which can also imprint exposure data between frames in addition to the date information. Using the exposure data imprint function will slow the F80 varying on film speed and temperature. [1]
The black F80 keeps with the traditional look of Nikon camera bodies, with a black plastic exterior, white Nikon lettering on the prism with a red rubber insert on the inside of the camera's grip. The F80 also has a silver (white chrome) variant, [2] which has a silver plastic exterior with black Nikon lettering.
The F80 accepts all F-mount Nikkor lenses with the exception of many pre AI, and all IX, lenses (these cannot be mounted on the F80 without causing damage). Older non-CPU AI and AIS lenses can be mounted on the camera, but exposure must be set manually as the camera will not meter through them at all.
The F80 was the first Nikon camera to feature on-demand grid lines.
The F80 was chosen by Nikon to be the basis for the popular Nikon D100 digital SLR. [3] The chassis was also used by Fujifilm as the basis for the FinePix S2 Pro and S3 Pro, and by Eastman Kodak for the Kodak DCS Pro 14n and DCS Pro SLR/n.
Rumors were abound during 2005 that Nikon would make a successor to the F80, and discontinue most other film cameras apart from the F6 and the F80 replacement. Early in 2006 Nikon announced that they intend to drop production of all film cameras apart from the F6 and FM10. Regardless of whether Nikon had actually developed (or even planned) a successor for the F80, it never appeared on the market.
The Nikon D100 is a discontinued 6-megapixel digital single-lens reflex camera made by Nikon Corporation and designed as a consumer alternative to the professional D1 series cameras. It was the precursor of both the more advanced D70 and D200 cameras with the former continuing the consumer offerings and the latter beginning an advanced consumer and professional lineup. The D70 kept the controls which the D100 inherited from the F80 film camera, which has evolved into the current D7500 and D750 offerings, in cropped frame and full frame respectively. The D200 adopted the controls of the D1 series.
The Nikon FM3ᴀ is an interchangeable-lens, focal-plane shutter, 35 mm film, single-lens reflex (SLR) camera. It was manufactured by Nikon Corporation in Japan, on small-volume assembly lines, from 2001 to 2006. The camera was available in two colours: all black and satin chrome. The introductory US list price for the chrome body only was $820.
The Nikon F6 is a 35 mm film single-lens reflex camera body manufactured by Nikon between 2004 and 2020. It was the sixth film camera in Nikon's 35mm F-series SLR line-up. Designed by Nikon, the model was manufactured at their Sendai plant.
The Kodak Professional DCS Pro SLR/n is a 13.5 megapixel full-frame 35mm digital SLR produced as a collaboration between Nikon Corporation and Eastman Kodak. It was an improved version of the Kodak Professional DCS Pro 14n series, and was based on a modified Nikon N80 film SLR and thus compatible with almost all Nikon F mount lenses. The camera was announced in early 2004 and became available to purchase mid-year. A monochrome variant named Kodak Professional DCS Pro SLR/n m of the camera existed as well.
The Nikon FA is an advanced amateur-level, interchangeable lens, 35 mm film, single-lens reflex (SLR) camera. It was manufactured by the Japanese optics company Nippon Kogaku K. K. in Japan from 1983 to 1987. The FA used a titanium-bladed, vertical-travel Nikon-designed, Copal-made focal plane shutter with a speed range of 1 to 1/4000th second plus Bulb and flash X-sync of 1/250th second. It was available in two colors: black with chrome trim and all black. The introductory US list price for the chrome body only was $646. Note that SLRs usually sold for 30 to 40 percent below list price.
The Nikon FE2 is a 35 mm single lens reflex (SLR) camera manufactured by Nippon Kogaku K. K. in Japan from 1983 to 1987. The FE2 uses a Nikon-designed vertical-travel focal-plane shutter with a speed range of 8 to 1/4000th second, plus Bulb and flash X-sync of 1/250th second. It was available in two colors: black with chrome trim and all black. The introductory US list price for the chrome body only was $446. Note that SLRs usually sold for 30 to 40 percent below list price.
The Nikon F3 was Nikon's third professional single-lens reflex camera body, preceded by the F and F2. Introduced in March 1980, it had manual and semi-automatic exposure control whereby the camera would select the correct shutter speed. The Nikon F3 series cameras had the most model variations of any Nikon F camera. It was also the first of numerous Nikon F-series cameras to be styled by Italian designer Giorgetto Giugiaro, and to include a red stripe on the handgrip – a feature that would later become a signature feature of many Nikon cameras.
The Nikon EM is a beginner's level, interchangeable lens, 35 mm film, single lens reflex (SLR) camera. It was manufactured by Nippon Kogaku K. K. in Japan from 1979 to 1982. The camera was designed for and marketed to the growing market of new photographers then entering the SLR buyer's market. The EM uses a Seiko MFC-E focal plane shutter with a speed range of 1 to 1/1000 second plus Bulb and flash X-sync of 1/90 second. It is 86 mm (3.4 in) high, 135 mm (5.3 in) wide, 54 mm (2.1 in) deep and weighed 460 grams (16 oz). Unlike most Nikons of the time, it was available only in black. The EM has no full manual exposure mode capability, but instead was intended to be used by inexperienced photographers who could not easily master the intricacies of shutter speeds and f-stops. There were also significant changes to the EM's mechanical and electrical components to reduce its production cost relative to previous Nikon cameras: dimensional tolerances weren't as tight, there were no ball bearings in the film advance mechanism, and no high-quality titanium shutter. The introductory US list price for the body plus normal lens was only $231.
The Nikon FG is an interchangeable lens, 35 mm film, single-lens reflex (SLR) camera. It was manufactured by Nippon Kogaku K. K. in Japan from 1982 to 1986.
The Kodak Professional DCS Pro 14n is a professional Nikon F80 based F-mount digital SLR produced by Eastman Kodak. It was announced at the photographic trade show photokina in Germany during September 2002; production examples became available in May 2003.
The Nikon F-mount is a type of interchangeable lens mount developed by Nikon for its 35mm format single-lens reflex cameras. The F-mount was first introduced on the Nikon F camera in 1959, and features a three-lug bayonet mount with a 44 mm throat and a flange to focal plane distance of 46.5 mm. The company continues, with the 2020 D6 model, to use variations of the same lens mount specification for its film and digital SLR cameras.
The Kodak DCS 300 series comprises two cameras, the DCS 315 and DCS 330. They are professional-level digital SLR cameras built by Eastman Kodak's Kodak Professional Imaging Solutions division. They were based on the Nikon Pronea 6i APS SLR camera and were aimed at a lower price point than other models in the Kodak DCS range. The 1.5 megapixel DCS 315 was launched in 1998, while the 3 megapixel DCS 330 was launched in 1999. The DCS 315 was the first digital SLR camera to incorporate an image preview LCD and inbuilt JPEG processing.
A full-frame DSLR is a digital single-lens reflex camera (DSLR) with a 35 mm image sensor format. Historically, 35 mm was one of the standard film formats, alongside larger ones, such as medium format and large format. The full-frame DSLR is in contrast to full-frame mirrorless interchangeable-lens cameras, and DSLR and mirrorless cameras with smaller sensors, much smaller than a full 35 mm frame. Many digital cameras, both compact and SLR models, use a smaller-than-35 mm frame as it is easier and cheaper to manufacture imaging sensors at a smaller size. Historically, the earliest digital SLR models, such as the Nikon NASA F4 or Kodak DCS 100, also used a smaller sensor.
The Nikon F5 is a professional 35 mm film-based single-lens reflex camera body manufactured by Nikon from 1996 through 2004. It was the fifth in Nikon's professional film camera line, which began in 1959 with the Nikon F. It followed the Nikon F4 of 1988, which introduced in-body autofocus to Nikon's professional line. The F5 was in turn succeeded by the Nikon F6, as well as Nikon's parallel range of professional digital SLRs, beginning with the Nikon D1.
The Nikon FM10 is a manual focus 35 mm film camera formerly sold by Nikon Corporation. It is of SLR design and was first available in 1995. It is normally sold in a kit that includes a Zoom Nikkor 35–70 mm f/3.5-4.8 zoom lens, although a Zoom Nikkor 70–210 mm f/4.5-5.6 zoom lens is also available. An electronic companion model known as the FE10 was also sold at one stage.
The EOS-1N is a 35mm single lens reflex (SLR) camera body produced by Canon. It was announced by Canon in 1994, and was the professional model in the range, superseding the original Canon EOS-1. The camera was itself superseded by the EOS-1V in 2000.
The Fujifilm FinePix S3 Pro is an interchangeable lens digital single-lens reflex camera introduced in February 2004. Its successor, the Finepix S5 Pro, was released on 25 September 2006. It is based on a Nikon F80 viewfinder, shutter, mirror-box and autofocus modules surrounded by a Fujifilm body that includes its own proprietary CCD image sensor and electronics, and a vertical grip shutter release. It has a Nikon F lens mount and can use most lenses made for 35 mm Nikon SLR cameras, but only with manual operation with Nikon AIS lenses, unusually for a digital SLR the S3 Pro can be used with a manual cable release.
The Nikon F90 is a 35mm SLR camera manufactured between 1992 and 2001 and replaced the earlier Nikon F-801. At the time of its release it was noted for its fast autofocus speed compared to previous Nikon models, which had lagged behind competitor Canon's. It was thus seen by many as a 'stop-gap' measure to prevent the mass migration of many Nikon-using professional photographers to Canon, as Nikon's next fully professional camera, the F5, was some time away from release. The Nikon F4, the professional model available at the time of the F90's release, had very slow autofocus compared to Canon's autofocus SLRs.
The Kodak Digital Camera System is a series of digital single-lens reflex cameras and digital camera backs that were released by Kodak in the 1990s and 2000s, and discontinued in 2005. They are all based on existing 35mm film SLRs from Nikon, Canon and Sigma. The range includes the original Kodak DCS, the first commercially available digital SLR.
The Nikon F-601m is a manual focus, autoexposure, auto film loading and advancing 35 mm SLR camera manufactured by the Nikon Corporation and released in 1990.