Number matching

Last updated

Number matching or matching numbers is a term often used in the collector car industry to describe cars with original major components, or major components that match one another.

Contents

Many times these major components contain dates, casting numbers, model numbers, Vehicle Identification Numbers (VIN), stamped numbers, or codes that can match the original components that were on the car when it was new. [1] [2]

Definition

The term "number matching" (or "matching numbers") is a term used in the collector car industry to describe the authenticity of collectible or investment quality cars. Number matching generally means that a particular car still contains its original major components or has major components that match exactly the major components the car had when it was new. These "major components" are not always agreed on. [3] The appearance of a number matching car likely could not be distinguished from an original car.

Major components

These are parts such as the engine, transmission, rear-axle assembly, and frame of the car, with intake manifolds, exhaust manifolds, body panels, and carburetors sometimes also considered. [4] Many times these components contain dates, casting numbers, model numbers, VIN, stamped numbers, or codes that can match the original components that were on the car when it was new. The definition can often vary from manufacturer to manufacturer, as well as from country to country. Often parts such as transmissions and rear-axles will be common across a range of models and as such do not carry any stamped link to the car it was originally installed in.

It is widely accepted[ citation needed ] however that the minimum requirement for a vehicle to be Number matching (or matching numbers, depending on local terminology) is for the original Chassis number and/or Vehicle Identification Number (VIN) to match to the engine block, if that is how the original manufacturer identified it, and the data tags. If the manufacturer did not serialize the engine block, all engineering numbers, casting numbers, date codes and any other numbers used by the original manufacturer must match what would have been original to the vehicle.

Minor components

These are parts that are commonly replaced due to regular wear and tear. Parts such as the interior fabric, paint, chrome trim, brakes, instruments, electrical components and wiring are considered minor components and generally do not affect the value of the car.

Verification

The numbers or casting dates on the major components of a car would be present and fall in a particular order. [5] For example, an engine's assembly date would be before the build date of the car, and the casting dates would be before the assembly date of the engine because an engine assembly date (the date the engine was assembled, usually at a different location) could not be after the assembly date of the whole car. Engines are assembled prior to being installed in the car at the factory. Therefore, the assembly date of the car would have to be after the assembly date of the engine. Casting dates (the dates formed in the metal of a component at the foundry) could not be after the assembly date of the engine. And casting dates would be well in advance of the assembly date of the engine. Numbers and dates track an accurate history of how a car was built and when and where the car and the parts used to create the car were made.

If a car has number matching major components it helps define how collectible a car is. Number matching cars typically will have a much greater value than non-number matching cars, because they are much rarer than non-number matching cars, [6] and are seen as a more accurate description of how the car was built. [7]

Related Research Articles

Vehicle identification number System for identifying vehicles

A vehicle identification number (VIN) is a unique code, including a serial number, used by the automotive industry to identify individual motor vehicles, towed vehicles, motorcycles, scooters and mopeds, as defined by the International Organization for Standardization in ISO 3779 and ISO 4030.

Product (business) Anything that can be offered to a market

In marketing, a product is an object, or system, or service made available for consumer use as of the consumer demand; it is anything that can be offered to a market to satisfy the desire or need of a customer. In retailing, products are often referred to as merchandise, and in manufacturing, products are bought as raw materials and then sold as finished goods. A service is also regarded as a type of product.

Engine tuning

Engine tuning is the adjustment or modification of the internal combustion engine or Engine Control Unit (ECU) to yield optimal performance and increase the engine's power output, economy, or durability. These goals may be mutually exclusive; an engine may be de-tuned with respect to output power in exchange for better economy or longer engine life due to lessened stress on engine components.

The model year is a method of describing the version of a product which has been produced over multiple years. The model year may or may not be the same as the calendar year in which the product was manufactured.

A replacement automobile engine is an engine or a major part of one that is sold individually without any other parts required to make a functional car. These engines are produced either as aftermarket parts or as reproductions of an engine that has gone out of production.

Car platform Similar design and engineering specs shared between multiple cars

A car platform is a shared set of common design, engineering, and production efforts, as well as major components over a number of outwardly distinct models and even types of cars, often from different, but somewhat related marques. It is practiced in the automotive industry to reduce the costs associated with the development of products by basing those products on a smaller number of platforms. This further allows companies to create distinct models from a design perspective on similar underpinnings.

General Motors LS-based small-block engine V8 automobile engine made by General Motors

"LS engine" is the colloquial name given to the 3rd and 4th generation small-block V-8 gasoline engine used in General Motors' vehicles. The name evolved from the need to differentiate the Gen 3/Gen 4 small blocks from the original Gen 1/Gen 2 small blocks released in 1954, which are commonly referred to as "Small Block Chevrolets". The "LS" name originates from the engine RPO code of the first Gen 3 small block, the LS1, introduced in the 1997 Corvette. The term "LS engine" is used to describe any Gen 3 or Gen 4 Small Block Chevrolet, including those that do not specifically include "LS" as part of their RPO code. Sometimes referred to as an "LSx", with the lower case "x" standing in for one of the many RPO code variations of the motor, the term can cause confusion since GM now sells an aftermarket LS cylinder block named "LSX" with a capital "X". The original RPO code "LS1" is still sometimes used, if not confusingly, to describe the entire Gen 3/Gen 4 engine family.

Shelby Series 1 Motor vehicle

Shelby Series 1 is a high-performance roadster designed by Carroll Shelby and produced by Shelby American.

Reliant Rialto Motor vehicle

The Reliant Rialto is a three-wheeled car that was manufactured by Reliant Motor Company, replacing the original MkI Reliant Robin in 1982. It featured a much squarer aerodynamic body, servicing panels, a single large windscreen wiper, a thicker fibreglass body and altered interior, but the chassis, engine and a lot of large components were from the previous model. The improvements gave the Rialto improved high-speed stability as well as improved fuel economy.

The Powerglide is a two-speed automatic transmission designed by General Motors. It was available primarily on Chevrolet from January 1950 through 1973, although some Pontiac models also used this automatic transmission after the fire at the Hydra-Matic factory in 1953. Powerglides were used extensively on Pontiacs produced for the Canadian market with Chevrolet powertrains. They were also used with Nova engines in the DJ-5A Jeeps produced 1968-1970 by Kaiser-Jeep and widely used as delivery vehicles by the United States Post Office. When introduced on upper-level Chevrolet models in 1950, the Powerglide represented the first automatic transmission offered in a low-priced automobile; in contrast, Ford did not offer their automatic transmission until 1951, while Plymouth car buyers had to wait until 1954. The transmission was simple and very durable, which satisfied customers.

On-board diagnostics Automotive engineering terminology

On-board diagnostics (OBD) is an term referring to a vehicle's self-diagnostic and reporting capability. OBD systems give the vehicle owner or repair technician access to the status of the various vehicle sub-systems. The amount of diagnostic information available via OBD has varied widely since its introduction in the early 1980s versions of on-board vehicle computers. Early versions of OBD would simply illuminate a malfunction indicator light or "idiot light" if a problem was detected but would not provide any information as to the nature of the problem. Modern OBD implementations use a standardized digital communications port to provide real-time data in addition to a standardized series of diagnostic trouble codes, or DTCs, which allow a person to rapidly identify and remedy malfunctions within the vehicle.

Mitsubishi FTO Motor vehicle

The Mitsubishi FTO is a front engined, front-wheel drive coupe produced by Mitsubishi Motors between 1994 and 2000. It was originally planned to be exclusively for the Japanese domestic market, although its popularity as a grey market import to the United Kingdom, Ireland, Hong Kong, Singapore, Malaysia, Australia and New Zealand led to eventual limited distribution through Mitsubishi's official dealers in those regions at the tail-end of production. Upon its debut it won the Car of the Year Japan award for 1994–95, commemorated by a Limited Edition of the FTO GPX model. In Japan it was sold at two retail chains called Car Plaza and Galant Shop.

VIN etching is a countermeasure to motor vehicle theft, that involves etching a vehicle's VIN onto its windows to reduce the value of a stolen vehicle to thieves.

Nissan Motor Manufacturing UK

Nissan Motor Manufacturing (UK) Ltd (NMUK) is a car manufacturing plant in Sunderland. It is owned and operated by the European division of Japanese car manufacturer Nissan.

Panoz Roadster Motor vehicle

The Panoz Roadster is a sports car launched in 1992 by the American manufacturer Panoz Auto Development Company of Georgia. The Roadster was succeeded by the AIV Roadster in 1997. They were built using aluminum, similar to that of the Plymouth Prowler first sold several years later in 1997. The Panoz Roadster was the first American built aluminum intensive vehicle.

Harley-Davidson WLA Type of motorcycle

The Harley-Davidson WLA is a Harley-Davidson motorcycle that was produced to US Army specifications in the years during and around World War II. It was based on an existing civilian model, the WL, and is of the 45 solo type, so called due to its 45-cubic-inch (740 cm3) engine displacement and single-rider design. It acquired the nickname "Liberator"

The following outline is provided as an overview of and topical guide to automobiles:

Boss 429 Mustang Motor vehicle

The Boss 429 Mustang is a high performance Ford Mustang variant that was offered by Ford in 1969 and 1970. Engine builder Jon Kasse currently reproduces the cylinder heads that make up the "boss 9" engine architecture.

Lot number An identification number assigned to a particular quantity or lot of material

A lot number is an identification number assigned to a particular quantity or lot of material from a single manufacturer. Lot numbers can typically be found on the outside of packaging. For cars, a lot number is combined with a serial number to form the Vehicle Identification Number.

References

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.