Obice da 75/18 modello 34

Last updated
Obice da 75/14 modello 34
Obice da 75-18 modello 34 Herakleion.jpg
TypeHowitzer
Place of originItaly
Service history
In service1934–1945
Used byItaly
Portugal
Wars World War II
Portuguese Colonial War
Production history
DesignerSergio Belese
Manufacturer Ansaldo
No. builtApprox 600 [1]
Specifications
MassMod.34:

1,065 kg (2,348 lb) Travel
780 kg (1,720 lb) Combat

Contents


Mod.35:
1,832 kg (4,039 lb) Travel
1,050 kg (2,310 lb) Combat
Barrel  length1.557 m (5 ft 1.3 in) L/20.75

Shell 75 x 232.5mmR
Shell weight6.4 kg (14 lb 2 oz)
Caliber 75 mm (2.95 in)
Carriage Box trail (Modello 34)
Split trail (Modello 35)
Elevation -10° to +45°
Traverse 50°
Muzzle velocity 425 m/s (1,395 ft/s)
Maximum firing range9,564 m (10,459 yd)
Obice de 75/18 modello 35 on display at the Musee des Blindes in Saumur Obice-de-75-18-M35-Saumur.0004x08e.jpg
Obice de 75/18 modello 35 on display at the Musée des Blindés in Saumur

The Obice da 75/18 modello 34 was an Italian artillery piece used during World War II.

History

The Italian army has always had an interest in mountain artillery due to the mountainous terrain of its borders. By the 1930s much of this artillery was obsolescent and overdue for replacement.

In 1934, the Italian firm of Ansaldo produced a new mountain howitzer design, the Obice da 75/18 modello 34, designed by Lt. Colonel Sergio Berlese who served in the Italian artillery. The modello 34 could be broken down into eight loads for transport. In the interest of standardization and logistics a version of the 75/18, the modello 35, was also used as the light howitzer component of normal field batteries. The modello 35 did not break down into smaller loads and had a split, rather than box, trail. [2]

The Italians sold the modello 35 abroad in order to obtain foreign currency. In 1940 a sizable batch was sold to Portugal, and more went to South American countries in exchange for raw materials. The gun was also used as the main armament of the Semovente 75/18 self-propelled gun where, due to its "Effetto Pronto" (HEAT) ammunition, it also had a good anti-tank capability.

In 1941 some captured pieces were used against the Germans by the forces of the Commonwealth during the Battle of Crete and were probably present in the defence of Maleme airfield. Two of them are currently displayed next to the Battle of Crete monument in Heraklion.

See also

Related Research Articles

<span class="mw-page-title-main">Mountain gun</span> Artillery pieces designed for use in mountain warfare

Mountain guns are artillery pieces designed for mountain warfare and other areas where wheeled transport is not possible. They are generally capable of being taken apart to make smaller loads for transport by horses, humans, mules, tractors, or trucks. As such, they are sometimes called "pack guns" or "pack howitzers". During the American Civil War these small portable guns were widely used and were called "mountain howitzers".

<span class="mw-page-title-main">Cannone da 75/27 modello 11</span> Field gun

The Cannone da 75/27 modello 11 was a French-designed field gun produced in Italy prior to World War I. It was introduced in 1912, designed by Joseph-Albert Deport. It was taken into service by Italy for use with its Alpine and cavalry troops going into World War I, and was built there in large numbers. The gun was designed with two notable features. It was the first artillery piece to introduce the split trail, as well as the last to utilize its novel dual-recoil system. The former became a very popular feature on artillery pieces through to the modern day. The later, while functional, did not get repeated. The dual-recoil system consisted of a small tubular recoil under the barrel which in turn traveled in a traditional rectangular cradle. This lessened heat transfer from the gun barrel to the recoil mechanism effectively, but was not necessary for the added complexity.

<span class="mw-page-title-main">Obice da 210/22</span> Howitzer

The Obice da 210/22 modello 35 was an Italian heavy howitzer designed by the Italian Arms and Munitions Technical Service (STAM) and accepted into service by the Royal Italian Army in 1938. A total of 346 were ordered and the gun was produced by Ansaldo at their Pozzuoli factory. However production was slow and approximately 85 were produced by September 1943. After Italy surrendered Germany seized as many as they could and a factory in Northern Italy continued to produce a small number for the German Army. The carriage was split trail with four wheels which raised from the ground for firing and the gun was trunnioned under the breech to allow for maximum recoil and elevation.

<span class="mw-page-title-main">Cannone da 90/53</span> Anti-aircraft gun

The Cannone da 90/53 was an Italian-designed cannon used both in an anti-aircraft role and as an anti-tank gun during World War II. It was one of the most successful anti-aircraft guns to see service during the conflict. The naval version of the gun was mounted on Italian battleships of the Littorio-class and the Andrea Doria-class.

<span class="mw-page-title-main">Cannone da 75/32 modello 37</span> Field gun

The Cannone da 75/32 modello 37 was an Italian field gun used during World War II. The designation indicates that the gun had a 75 mm caliber, the barrel was 32 caliber-lengths long and it was accepted for service in 1937.

<span class="mw-page-title-main">Semovente da 105/25</span> Self-propelled gun

The Ansaldo 105/25 M43, also known as Semovente 105/25, was an Italian self-propelled gun used during World War II and designed by Ansaldo. It was the most powerful self-propelled gun built by Italy in numbers during World War II.

<span class="mw-page-title-main">Canon de 155 C modèle 1917 Schneider</span> Heavy field howitzer

The Canon de 155 C modèle 1917 Schneider, often abbreviated as the C17S, was a French howitzer designed by Schneider. It was essentially the Canon de 155 C modèle 1915 Schneider fitted with a different breech to use bagged propellant rather than the cartridge cases used by the older howitzer. It was used by France, Russian Empire, Belgium, Romania, and the United States from 1917 during World War I and was widely exported after the war. Surviving weapons were in service with France, Poland, Greece, Italy, Belgium, the United States, and Finland during World War II. Captured weapons were used by the Germans for their 2nd-line artillery and coast defense units.

<span class="mw-page-title-main">Semovente da 149/40</span> Self-propelled gun

The Semovente da 149/40 was an Italian self-propelled artillery piece designed in 1942. Only a single unit was built; this vehicle is displayed at the US Army Ordnance Museum, Aberdeen, Maryland.

<span class="mw-page-title-main">10 cm M. 14 Feldhaubitze</span> Howitzer

The 10 cm M. 14 Feldhaubitze was a dual-purpose field and mountain gun used by Austria-Hungary during World War I. Between the wars it was used by Austria, Italy, Russia and Poland. During World War II it served as the standard medium howitzer of the Royal Italian Army with the designation Obice da 100/17 modello 14 and after 1943 captured weapons were used by Nazi Germany's Wehrmacht under the designations 10 cm leFH 14(ö) and 10 cm leFH 315(i). After World War II an updated howitzer remained in service with the Italian Army until 1975.

<span class="mw-page-title-main">Mortaio da 210/8 D.S.</span> Siege howitzer

The Mortaio da 210/8 was a siege howitzer which served with Italy during World War I and World War II.

<span class="mw-page-title-main">Obice da 105/14</span> Howitzer

The Obice da 105/14 modello 17 was a howitzer used by Italy during World War II. The howitzer was designed by Schneider in 1906. It was chosen by the Italian Regio Esercito to serve as their new field gun, but licence production by Ansaldo was slow. Some more were produced during the interwar years, but the captured Austrian Obice da 100/17 was generally considered to be superior.

<span class="mw-page-title-main">Semovente da 75/18</span> Self-propelled gun

The Semovente da 75/18 was an Italian self-propelled gun of the Second World War. It was built by mounting the 75 mm Obice da 75/18 modello 34 mountain gun on the chassis of a M13/40, M14/41 or M15/42 tank. The first 60 were built using the M13/40 chassis and a subsequent 162 were built on the M14/41 chassis from 1941 to 1943. A total of 190 were built utilizing the M42 chassis before the armistice and an additional 55 were built afterwards. The Semovente da 75/18 was intended to be an interim vehicle until the heavier P40 tank could be available.

<span class="mw-page-title-main">Obice da 305/17</span> Weapon

Obice da 305/17 was an Italian howitzer used during World War I. Produced by the Armstrong works in Italy between 1914 and 1917, approximately 30-44 were built. Originally the Obice da 305/17 Modello 15 was a stationary coastal defense gun but was later adapted to a mobile siege artillery role. A number also served during World War II.

<span class="mw-page-title-main">Tanks in the Italian Army</span> History of tanks used or produced by Italy

Tanks have been employed by the military forces in Italy since their first use in World War I. They have had continued use in wars after and are still used through the modern day. The C1 Ariete is the current main battle tank of the Italian Army.

<span class="mw-page-title-main">Obice da 149/12</span> Howitzer

The Obice da 149/12 was an Italian howitzer produced under license in Italy by Ansaldo and Vickers-Terni which was used during World War I and World War II.

<span class="mw-page-title-main">Obice da 280</span> Coastal artillery

The Obice da 280 was an Italian coastal defense and siege howitzer designed in 1884 by the British Armstrong firm and produced under license by the Ansaldo company during the late 1800s. It was used during both the First and Second World Wars.

<span class="mw-page-title-main">Cannone da 75/27 modello 12</span> Horse artillery

The Cannone da 75/27 modello 1912 cannon was a piece of horse artillery used by the Royal Italian Army during the First and Second World Wars. The Germans designated captured guns as the 7.5 cm Feldkanone 245(i).

<span class="mw-page-title-main">Mortaio da 210/9 modello 1914</span> Heavy Mortar

The Mortaio da 210/9 modello 1914 was an Italian Heavy Mortar designed by the French Schneider Company and produced under license in Italy by Ansaldo for the Italian Army and used during the First World War.

References

  1. ^ 44 from the Arsenal of the Royal Army of Piacenza, 100 from the Arsenal of the Royal Army of Naples, 270 from the OTO, 200 pieces from Ansaldo of Pozzuoli, see F. Cappellano, op. cit. cited in page 68.
  2. Google Books: The Encyclopedia of Weapons