Ormrod and Hardcastle

Last updated

Ormrod and Hardcastle spinning and manufacturing firm began in 1788, with the partnership of James Ormrod and Thomas Hardcastle, and the purchase of the Flash Street mills in Bolton, Greater Manchester. [1] These two men have been identified amongst the fathers of the early cotton trade in North West England. Others named are Carlisles, Gray, Knowles, Bulling, Crook and Culling. These names often figured prominently in the political, judicial and economic life of Bolton during its great period of growth, but sadly these names have been largely forgotten in the history of the cotton trade. [2] By the time of their closure, in 1960, Ormrod and Hardcastle owned six large successful cotton mills in Bolton. [3]

Contents

History

18th Century

Thomas Hardcastle established a bleaching business in Bradshaw at the young age of nineteen and the start of a cotton spinning firm was to be his next business venture. The partnership with James Ormrod and the purchase of Pin Mill, Royal George Mill, Royal Sovereign Mill and Great Moor Street Mill, in Bolton, made this business plan possible. These mills were more commonly known as the Flash Street Mills (floorspace 198,000 square ft). Pin Mill fronted Ormrod Street, Royal Sovereign Mill faced Flash Street and Royal George Mill fronted Western Street/ Great Moor Street. The new cotton spinning firm was to consist of cotton spinners, doublers and manufacturers. [1] It was the construction of the Manchester Bolton & Bury Canal in 1791 that started Bolton on its path to becoming a centre for textile production in North West England with an international reputation. In particular, it was important for the Bolton Mill owners as it connected the town to Bury and Manchester and subsequently provided a more direct transport route for coal and other basic materials. [4]

19th Century

Bolton flourished in the 19th Century and quickly became Lancashire's third largest engineering centre, after Manchester and Oldham. It was this introduction of Textile manufacture during the Industrial Revolution that forced Bolton's quick development, urbanisation and cotton mill success. [5] However, it must be noted that there is a limited amount of information that has survived about the Bolton cotton mills. This is could be for a number of different reasons. Firstly, records take up a lot of space and as a result they are commonly destroyed or divided up among many sources. Secondly, production work of this nature does not often produce records that people see as important enough to keep. Lastly, records may still exist but they are unknown to local archives. Ormrod and Hardcastle Spinning and Manufacturing firm was very successful during the nineteenth century and was ever expanding despite a few drawbacks along the way. For example, in 1818 the Royal Sovereign Mill burnt down but this was common for cotton mills as floors were wooden and gas lights were used. The main fire hazard was 'fluffy cotton' that at times became almost explosive. One cotton mill worker commented how a six-story mill could burn down in an hour and when a "taper was used to ignite the gas lightening, the 'dain' would ignite and fire would spread along a line of looms." [6] However, in this case it was suspected that the Royal Sovereign was burnt down by an act of arson because of social unrest in that period. [7] In 1825 James Ormrod died (aged 56) and Peter Ormrod (d.1875) became head of the eminent firm along with James Cross (d.1889), a local justice of the peace. This is just a few years before 'the age of the train' began, in 1828, with the opening of the Bolton Leigh Railway, engineered by George Stephenson. This opening was a very significant moment in the history of North-West England as it was Lancashire's first railway that could transport paying public as well as goods. The railway even opened two years before the opening of the highly celebrated railway from Manchester to Liverpool railway. [8] This new train line was a great asset for the cotton mill owners as it connected Bolton to the Leeds and Liverpool Canal and thus provided an important link with the port of Liverpool. This link allowed the import of raw cotton from America or Egypt to travel directly and quickly to the mills. The railway was so successful that it was extended in 1829 to link up with the Manchester to Liverpool Line. It was this environment that encouraged the success of the Ormrod and Hardcastle Mills. [9] In 1838 the Royal George Mill burnt down. Nonetheless, this not to be a setback for the firm and in 1857 they purchased another spinning mill called Bullfield Mill (established as Messrs Twycross when it was built in 1842). This resulted in Ormrod and Hardcastle owning 113,688 spindles and 458 looms. On 5 June 1881 Ormrod and Hardcastle spinning firm suffered another fire and this resulted in £10,000 worth of damage to Bullfield Mill and they were forced to demolish 50% of the building. [10] Following this, in 1884, the firm wisely decided to invest in The Royal George Mill and Pin Mill and improved their fire proof standards. [11] The mills seemed to be going from strength to strength as in 1888 the firm amalgamated with Arthur Briggs's Parrot Street Mill. [12] Bolton's international reputation, as one of the most productive centres of cotton spinning in the world, was becoming so impressive that it generated a lot of attention from leading figures of the day. For example, Prince Albert visited Bolton in 1851. [13]

20th Century

In the 1900s Ormrod and Hardcastle became one of fourteen businesses to become part of the Fine Cotton Spinners and Doublers Association Ltd Ltd (FCSDA Ltd). [14] However, the mills continued to trade under the name Ormrod, Hardcastle and Co Ltd until closure. [15] The mills had grown to consist of 364 looms, 115,664 mule and ring spindles and 32,438 doubling spindles. [16] However, in 1902 the Bleaching business became part of the Bleachers Association and in World War One it was used for a number of government contracts. [17] In 1912 Britain's cotton industry sadly reached its peak, with eight billion yards of cloth being produced, [18] but in 1924 the company was evidently still successful as the Royal Sovereign Mill was expanded (spinning looms now reach 99,456 and the number of doubling spindles increased to 40,456). Despite one of the Mills being hit by a bomb, during a Zeppelin raid, on 26 September 1916. Even though Bolton was not the intended target 21 bombs were dropped and 13 civilians were killed (for photos see Bolton Archive). [19] It was only the 1959 Cotton Industry Act that forced the closure of the cotton mills in 1960 as it resulted in the collapse in the demand for cotton. The Flash Street Mills soon became a place for light industries whereas the Parrot Street Mill became a brewery under the control of Magee Marshall and co Ltd before a factory named Cambrian Soft Drinks Ltd. [20]

See also

Related Research Articles

Spinning jenny multi-spool spinning frame

The spinning jenny is a multi-spindle spinning frame, and was one of the key developments in the industrialization of weaving during the early Industrial Revolution. It was invented in 1764 by James Hargreaves in Stanhill, Oswaldtwistle, Lancashire in England. The device reduced the amount of work needed to produce cloth, with a worker able to work eight or more spools at once. This grew to 120 as technology advanced. The yarn produced by the jenny was not very strong until Richard Arkwright invented the water-powered water frame, which produced yarn harder and stronger than that of the initial spinning jenny. It started the factory system.

Textile manufacture during the British Industrial Revolution early textile production via automated means

Textile manufacture during the Industrial Revolution in Britain was centred in south Lancashire and the towns on both sides of the Pennines. In Germany it was concentrated in the Wupper Valley, Ruhr Region and Upper Silesia, in Spain it was concentrated in Catalonia while in the United States it was in New England. The main key drivers of the Industrial Revolution were textile manufacturing, iron founding, steam power, oil drilling, the discovery of electricity and its many industrial applications, the telegraph and many others. Railroads, steam boats, the telegraph and other innovations massively increased worker productivity and raised standards of living by greatly reducing time spent during travel, transportation and communications.

B. Hick and Sons, subsequently Hick, Hargreaves & Co, was a British engineering company based at the Soho Ironworks in Bolton, England. Benjamin Hick, a partner in Rothwell, Hick and Rothwell, later Rothwell, Hick & Co., set up the company in partnership with two of his sons, John (1815–1894) and Benjamin (1818–1845) in 1833.

Cottonopolis Nineteenth century nickname for Manchester

Cottonopolis was a 19th-century nickname for Manchester, as it was a metropolis and the centre of the cotton industry.

The Manchester warehouse which we lately visited, was a building fit for the Town Hall of any respectable municipality; a stately, spacious, and tasteful edifice; rich and substantial as its respectable proprietors, the well-known firm of Banneret and Co. There are nearly a hundred such buildings in Manchester; –not so large, perhaps, for this is the largest; but all in their degree worthy of Cottonopolis.

Trencherfield Mill

Trencherfield Mill is a cotton spinning mill standing next to the Leeds and Liverpool Canal in Wigan, Greater Manchester, England. It was built in 1907. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. The mill was driven by a 2,500 hp triple-expansion four-cylinder engine built by J & E Wood of Bolton in 1907. The two halves of the engine were called Rina and Helen. They drove a 26-foot flywheel with 54 ropes at 68 rpm. The engine was stopped in 1968. The mill is now part of the Wigan Pier redevelopment area and is used for other purposes.

Fine Spinners and Doublers was a major cotton spinning business based in Manchester, England. At its peak it was a constituent of the FT 30 index of leading companies on the London Stock Exchange.

The Amalgamated Association of Operative Cotton Spinners and Twiners, also known as the Amalgamation, was a trade union in the United Kingdom which existed between 1870 and 1970. It represented male mule spinners in the cotton industry.

Arkwright Mill, Rochdale

Arkwright Mill, Rochdale is a cotton spinning mill in Rochdale, Greater Manchester. It was built in 1885 by the Arkwright Cotton Spinning Co. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964.

Bolton Union Mill, Bolton

Bolton Union Mill was a cotton spinning mill in Halliwell, Bolton, Greater Manchester. It was built in 1875 and 1880. It was taken over by the Lancashire Cotton Corporation in the 1930s and brought back into production. Subsequently, it passed to Tootals and Dewhurst Dent in 1964. Production finished in 1967.

Wilton Mill, Radcliffe

Wilton Mill, Radcliffe was a cotton spinning mill in Radcliffe, Bury, Greater Manchester. It was built in 1907 and was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished, it was used by the East Lancashire Paper Company but has now been demolished leaving an empty site next to the railways and the River Irwell.

Royton Ring Mill, Royton

Royton Ring Mill was a cotton mill in Royton, Greater Manchester. It was built in 1908 and extended in 1912. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1966. It was extended again in 1969 and used for other purposes. It has now been demolished, the street has been renamed and houses replace it.

Pilot Mill, Bury

Pilot Mill, Bury is a four-storey cotton spinning mill in Bury, Greater Manchester. It was built in 1905. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished, it survived and as of 2010 it was in use by Antler Luggage. The Mill is currently occupied by Baum Trading Ltd and Metzuyan Ltd they have opened a retail outlet with an on site cafe. www.pilotmill.co.uk

Newby Mill, Shaw

Elm Mill, is a four storey cotton spinning mill in Shaw and Crompton, Greater Manchester. It was built in 1890 for the Elm Spinning Company Ltd., and closed in 1928, when it was revived by the Lancashire Cotton Corporation (1929) and called Newby Mill. LCC and all their assets passed to Courtaulds in 1964. Production at Newby finished in 1970, and it was used for warehousing. Subsequently, now named Shaw No 3 Mill, it became part of Littlewood's Shaw National Distribution Centre.

Laurel Mill, Middleton Junction Former cotton mill in Manchester, England

Laurel Mill was a cotton spinning mill in the Mills Hill/Middleton Junction area of Chadderton, in the Metropolitan Borough of Oldham, Greater Manchester, England.

Kingston Mill, Stockport cotton spinning mill in Edgeley, Stockport, Greater Manchester

Kingston Mill, Stockport is a mid nineteenth century cotton spinning mill in Edgeley, Stockport, Greater Manchester. It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished, it was made over to multiple uses.

Empress Mill, Ince

Empress Mill, Ince was a single storey shed mill alongside the Leeds and Liverpool Canal, spinning cotton in Ince, Wigan, Greater Manchester, England. It was operated by the Lancashire Cotton Corporation from the 1930s and passed to Courtaulds in 1964. Production ceased in 1975. It was the last mill in Ince to close, despite the intervention of Member of Parliament Michael McGuire, and a debate in the House of Commons on 20 March 1975.

John Kennedy (manufacturer) Scottish textile industrialist in Manchester

John Kennedy was a Scottish textile industrialist in Manchester.

Weavers Triangle Historic textie-producing area with a cotton museum in Lancashire, England

The Weavers' Triangle is an area of Burnley in Lancashire, England consisting mostly of 19th-century industrial buildings at the western side of town centre clustered around the Leeds and Liverpool Canal. The area has significant historic interest as the cotton mills and associated buildings encapsulate the social and economic development of the town and its weaving industry. From the 1980s, the area has been the focus of major redevelopment efforts.

Kearsley Mill Bolton, Greater Manchester, M26

Kearsley Mill is a 240,000 sq ft, late period cotton mill located in the small village of Prestolee in Kearsley, Greater Manchester. A near complete example of Edwardian mill architecture, the building now functions as headquarters for a number of businesses and is still used in the continued manufacturing and distribution of textiles by Richard Haworth Ltd Est (1876), part of the Ruia Group. The mill is a Grade II listed building.

References

  1. 1 2 Longworth, James (1986). The Cotton Mills of Bolton 1780–1985 A Historical Directory. Bolton: Bolton Museum and Art Gallery. p. 148.
  2. ↑ Longworth, James (1986). The Cotton Mills of Bolton 1780–1985 A Historical Directory. Bolton: Bolton Museum and Art Gallery. pp. 13–26.
  3. ↑ The Lancashire Textile Industry 1954. Textile Warril Standard Publication. 1954.
  4. ↑ Waterson, Alex (1985). On The Manchester, Bolton and Bury Canal. Lancashire: Neil Richardson. p. 148.
  5. ↑ Pevsner, Nikolaus (1969). South Lancashire: The Industrial and Commercial South. Yale: Yale University Press. p. 78.
  6. ↑ Mitchell, W (1984). Life in the Lancashire Mill Towns. Yorkshire: Dalesman Books. p. 18.
  7. ↑ Archer, John (2002). Social Unrest and Popular Protest in England, 1780–1840. Cambridge: Cambridge University Press.
  8. ↑ Longworth, James (1986). The Cotton Mills of Bolton 1780–1985 A Historical Directory. Bolton: Bolton Museum and Art Gallery. p. 13.
  9. ↑ Thomas, R (1980). The Liverpool and Manchester Railway. London: Batsford.
  10. ↑ Longworth, James (1986). The Cotton Mills of Bolton 1780–1985 A Historical Directory. Bolton: Bolton Museum and Art Gallery. p. 142.
  11. ↑ Farnie.D and Williams Mike (1992). Cotton Mills in Greater Manchester. Carnegie Publishing: Preston. pp. 60–100.
  12. ↑ Longworth, James (1986). The Cotton Mills of Bolton 1780–1985 A Historical Directory. Bolton: Bolton Museum and Art Gallery. p. 165.
  13. ↑ Longworth, James (1986). The Cotton Mills of Bolton 1780–1985. Bolton: Bolton Public Libraries.
  14. ↑ Fine Cotton Spinners and Doublers Association. Grace's Guide. 2007.
  15. ↑ Dixon, David. "Flash Street Mills" . Retrieved 18 January 2014.
  16. ↑ The Lancashire Textile Industry 1950. The Textile Waril Standard Publication. 1950.
  17. ↑ Longworth, James (1986). The Cotton Mills of Bolton 1780–1985 A Historical Directory. Bolton: Bolton Museum and Art Gallery.
  18. ↑ "Boom to Bust-The Decline of the Cotton Industry". BBC. Retrieved 18 January 2014.
  19. ↑ "Zeppelin Raid on Bolton". Bolton. Bolton Museum and Archive. Archived from the original on 3 February 2014. Retrieved 20 January 2014.
  20. ↑ Longworth, James (1986). The Cotton Mills of Bolton 1780–1985 A historical Directory. Bolton: Bolton Museum and Art Gallery.

Bibliography

This page is based on this Wikipedia article
Text is available under the CC BY-SA 4.0 license; additional terms may apply.
Images, videos and audio are available under their respective licenses.