Oxygen reduction reaction

Last updated

In chemistry, the oxygen reduction reaction refers to the reduction half reaction whereby O2 is reduced to water or hydrogen peroxide. In fuel cells, the reduction to water is preferred because the current is higher. The oxygen reduction reaction is well demonstrated and highly efficient in nature. [1] [2]

Contents

Stoichiometry

The stoichiometries of the oxygen reduction reaction, which depends on the medium, are shown: [3]

4e pathway in acid medium:

2e pathway in acid medium:

4e pathway in alkaline medium:

2e pathway in alkaline medium:

4e- pathway in solid oxide:

The 4e pathway reaction is the cathode reaction in fuel cell especially in proton-exchange membrane fuel cells, alkaline fuel cell and solid oxide fuel cell. While the 2e pathway reaction is often the side reaction of 4e- pathway or can be used in synthesis of H2O2.

Catalysts

Biocatalysts

The oxygen reduction reaction is an essential reaction for aerobic organisms. Such organisms are powered by the heat of combustion of fuel (food) by O2. Rather than combustion, organisms rely on elaborate sequences of electron-transfer reactions, often coupled to proton transfer. The direct reaction of O2 with fuel is precluded by the oxygen reduction reaction, which produces water and adenosine triphosphate. Cytochrome c oxidase affects the oxygen reduction reaction by binding O2 in a hemeCu complex. In laccase, O2 is engaged and reduced by a four-copper aggregate. Three Cu centers bind O2, and one Cu center functions as an electron donor. [1]

Heterogeneous catalysts

In fuel cells, platinum is the most common catalyst. Because platinum is expensive, it is dispersed on a carbon support. Certain facets of platinum are more active than others. [2]

Coordination complexes

Detailed mechanistic work results from studies on transition metal dioxygen complexes, which represent models for the initial encounter between O2 and the metal catalyst. Early catalysts for the oxygen reduction reaction were based on cobalt phthalocyanines. [4] Many related coordination complexes have been tested. [5] as the oxygen reduction reaction catalyst and different electrocatalysis performance was achieved by these small molecules. These exciting results trigger further research of the non-noble metal contained small molecules used for the oxygen reduction reaction electrocatalyst. [6] Besides phthalocyanine, porphyrin is also a suitable ligand for metal center to provide N4[ definition needed ] part in the M-N4 site. In biosystems, many oxygen related physical chemical reactions are carried by proteins containing the metal-prophyrin unit such as O2 delivery, O2 storage, O2 reduction and H2O2 oxidation.

Recent development and modification

Since the oxygen reduction reaction in fuel cells need to be catalyzed heterogeneously, conductive substrates such as carbon materials is always needed in constructing electrocatalysts. To increase the conductivity and enhance the substrate-loading interaction, thermal treatment is usually performed before application. During the treatment, M-N4 active sites turn to aggregate spontaneously due to the high intrinsic energy, which will dramatically decrease the active site density. Therefore, increasing the active site density and creating atomic level dispersed catalyst is a key step to improve the catalyst activity. To solve this problem, we can use some porous substrates to confine the active sites or use some defect or ligands to prevent the migration of the active site. In the mean time, the porous structure or the defect will also be beneficial to the oxygen absorption process. [7]

Besides active site density, the electron configuration of M center in M-N4 active site also plays an important role in the activity and stability of an oxygen reduction reaction catalyst. Because the electron configuration of M center can affects the redox potential, which determines the activation energy of the oxygen reduction reaction. To modulate the electron configuration, a simple way is to change the ligands of the metal center. For example, researchers found that whether the N atoms in M-N4 active sites are pyrrolic or pyridinic can affect the performance of the catalyst. [8] [9] Besides, some heteroatoms such as S, P other than N can also be used to modulate the electron configuration too, since these atoms have different electronegativity and electron configuration. [10]

Related Research Articles

<span class="mw-page-title-main">Catalysis</span> Process of increasing the rate of a chemical reaction

Catalysis is the increase in rate of a chemical reaction due to an added substance known as a catalyst. Catalysts are not consumed by the reaction and remain unchanged after it. If the reaction is rapid and the catalyst recycles quickly, very small amounts of catalyst often suffice; mixing, surface area, and temperature are important factors in reaction rate. Catalysts generally react with one or more reactants to form intermediates that subsequently give the final reaction product, in the process of regenerating the catalyst.

<span class="mw-page-title-main">Electrolysis</span> Technique in chemistry and manufacturing

In chemistry and manufacturing, electrolysis is a technique that uses direct electric current (DC) to drive an otherwise non-spontaneous chemical reaction. Electrolysis is commercially important as a stage in the separation of elements from naturally occurring sources such as ores using an electrolytic cell. The voltage that is needed for electrolysis to occur is called the decomposition potential. The word "lysis" means to separate or break, so in terms, electrolysis would mean "breakdown via electricity."

In chemistry, a half reaction is either the oxidation or reduction reaction component of a redox reaction. A half reaction is obtained by considering the change in oxidation states of individual substances involved in the redox reaction. Often, the concept of half reactions is used to describe what occurs in an electrochemical cell, such as a Galvanic cell battery. Half reactions can be written to describe both the metal undergoing oxidation and the metal undergoing reduction.

<span class="mw-page-title-main">Proton-exchange membrane fuel cell</span> Power generation technology

Proton-exchange membrane fuel cells (PEMFC), also known as polymer electrolyte membrane (PEM) fuel cells, are a type of fuel cell being developed mainly for transport applications, as well as for stationary fuel-cell applications and portable fuel-cell applications. Their distinguishing features include lower temperature/pressure ranges and a special proton-conducting polymer electrolyte membrane. PEMFCs generate electricity and operate on the opposite principle to PEM electrolysis, which consumes electricity. They are a leading candidate to replace the aging alkaline fuel-cell technology, which was used in the Space Shuttle.

<span class="mw-page-title-main">Alkaline fuel cell</span> Type of fuel cell

The alkaline fuel cell (AFC), also known as the Bacon fuel cell after its British inventor, Francis Thomas Bacon, is one of the most developed fuel cell technologies. Alkaline fuel cells consume hydrogen and pure oxygen, to produce potable water, heat, and electricity. They are among the most efficient fuel cells, having the potential to reach 70%.

A "photoelectrochemical cell" is one of two distinct classes of device. The first produces electrical energy similarly to a dye-sensitized photovoltaic cell, which meets the standard definition of a photovoltaic cell. The second is a photoelectrolytic cell, that is, a device which uses light incident on a photosensitizer, semiconductor, or aqueous metal immersed in an electrolytic solution to directly cause a chemical reaction, for example to produce hydrogen via the electrolysis of water.

<span class="mw-page-title-main">Photocatalysis</span> Acceleration of a photoreaction in the presence of a catalyst

In chemistry, photocatalysis is the acceleration of a photoreaction in the presence of a photocatalyst, the excited state of which "repeatedly interacts with the reaction partners forming reaction intermediates and regenerates itself after each cycle of such interactions." In many cases, the catalyst is a solid that upon irradiation with UV- or visible light generates electron–hole pairs that generate free radicals. Photocatalysts belong to three main groups; heterogeneous, homogeneous, and plasmonic antenna-reactor catalysts. The use of each catalysts depends on the preferred application and required catalysis reaction.

<span class="mw-page-title-main">Zinc–air battery</span> High-electrical energy density storage device

A zinc–air battery is a metal–air electrochemical cell powered by the oxidation of zinc with oxygen from the air. During discharge, a mass of zinc particles forms a porous anode, which is saturated with an electrolyte. Oxygen from the air reacts at the cathode and forms hydroxyl ions which migrate into the zinc paste and form zincate, releasing electrons to travel to the cathode. The zincate decays into zinc oxide and water returns to the electrolyte. The water and hydroxyl from the anode are recycled at the cathode, so the water is not consumed. The reactions produce a theoretical voltage of 1.65 Volts, but is reduced to 1.35–1.4 V in available cells.

Formic acid fuel cells (direct formic acid fuel cells or DFAFCs) are a subcategory of direct liquid-feed fuel cells (DLFCs), in which the liquid fuel is directly oxidized (electrochemically) at the anode instead of reforming to produce hydrogen. Formic acid-based fuel cells represent a promising energy supply system in terms of high volumetric energy density, theoretical energy efficiency, and theoretical open-circuit voltage. They are also able to overcome certain problems inherent to traditional hydrogen (H2) feed fuel cells such as safe handling, storage, and H2 transportation.

Oxygenevolution is the process of generating molecular oxygen (O2) by a chemical reaction, usually from water. Oxygen evolution from water is effected by oxygenic photosynthesis, electrolysis of water, and thermal decomposition of various oxides. The biological process supports aerobic life. When relatively pure oxygen is required industrially, it is isolated by distilling liquefied air.

An enzymatic biofuel cell is a specific type of fuel cell that uses enzymes as a catalyst to oxidize its fuel, rather than precious metals. Enzymatic biofuel cells, while currently confined to research facilities, are widely prized for the promise they hold in terms of their relatively inexpensive components and fuels, as well as a potential power source for bionic implants.

<span class="mw-page-title-main">Electrocatalyst</span> Catalyst participating in electrochemical reactions

An electrocatalyst is a catalyst that participates in electrochemical reactions. Electrocatalysts are a specific form of catalysts that function at electrode surfaces or, most commonly, may be the electrode surface itself. An electrocatalyst can be heterogeneous such as a platinized electrode. Homogeneous electrocatalysts, which are soluble, assist in transferring electrons between the electrode and reactants, and/or facilitate an intermediate chemical transformation described by an overall half reaction. Major challenges in electrocatalysts focus on fuel cells.

The lithium–air battery (Li–air) is a metal–air electrochemical cell or battery chemistry that uses oxidation of lithium at the anode and reduction of oxygen at the cathode to induce a current flow.

Water oxidation is one of the half reactions of water splitting:

<span class="mw-page-title-main">Mixed conductor</span>

Mixed conductors, also known as mixed ion-electron conductors(MIEC), are a single-phase material that has significant conduction ionically and electronically. Due to the mixed conduction, a formally neutral species can transport in a solid and therefore mass storage and redistribution are enabled. Mixed conductors are well known in conjugation with high-temperature superconductivity and are able to capacitate rapid solid-state reactions.

Yang Shao-Horn is a Chinese American scholar, Professor of Mechanical Engineering and Materials Science and Engineering and a member of Research Laboratory of Electronics at the Massachusetts Institute of Technology. She is known for research on understanding and controlling of processes for storing electrons in chemical bonds towards zero-carbon energy and chemicals.

The electrochemical promotion of catalysis (EPOC) effect in the realm of chemistry refers to the pronounced enhancement of catalytic reactions or significant changes in the catalytic properties of a conductive catalyst in the presence of electrical currents or interfacial potentials. Also known as Non-faradaic electrochemical modification of catalytic activity (the NEMCA effect), it can increase in catalytic activity (up to 90-fold) and selectivity of a gas exposed electrode on a solid electrolyte cell upon application of a potential. This phenomenon is well documented and has been observed on various surfaces (Ni, Au, Pt, Pd, IrO2, RuO2) supported by O2−, Na+ and proton conducting solid electrolytes.

<span class="mw-page-title-main">Water oxidation catalysis</span>

Water oxidation catalysis (WOC) is the acceleration (catalysis) of the conversion of water into oxygen and protons:

Gas-diffusion electrocrystallization (GDEx) is an electrochemical process consisting on the reactive precipitation of metal ions in solution with intermediaries produced by the electrochemical reduction of gases, at gas diffusion electrodes. It can serve for the recovery of metals or metalloids into solid precipitates or for the synthesis of libraries of nanoparticles.

Hydrogen evolution reaction (HER) is a chemical reaction that yields H2. The conversion of protons to H2 requires reducing equivalents and usually a catalyst. In nature, HER is catalyzed by hydrogenase enzymes. Commercial electrolyzers typically employ supported platinum as the catalyst at the anode of the electrolyzer. HER is useful for producing hydrogen gas, providing a clean-burning fuel. HER, however, can also be an unwelcome side reaction that competes with other reductions such as nitrogen fixation, or electrochemical reduction of carbon dioxide or chrome plating.

References

  1. 1 2 Gewirth, Andrew A.; Varnell, Jason A.; Diascro, Angela M. (2018). "Nonprecious Metal Catalysts for Oxygen Reduction in Heterogeneous Aqueous Systems". Chemical Reviews. 118 (5): 2313–2339. doi:10.1021/acs.chemrev.7b00335. PMID   29384375.
  2. 1 2 Shao, Minhua; Chang, Qiaowan; Dodelet, Jean-Pol; Chenitz, Regis (2016). "Recent Advances in Electrocatalysts for Oxygen Reduction Reaction" (PDF). Chemical Reviews. 116 (6): 3594–3657. doi:10.1021/acs.chemrev.5b00462. PMID   26886420.
  3. Ge, Xiaoming; Sumboja, Afriyanti; Wuu, Delvin; An, Tao; Li, Bing; Goh, F. W. Thomas; Hor, T. S. Andy; Zong, Yun; Liu, Zhaolin (2015-08-07). "Oxygen Reduction in Alkaline Media: From Mechanisms to Recent Advances of Catalysts". ACS Catalysis. 5 (8): 4643–4667. doi:10.1021/acscatal.5b00524.
  4. Jasinski, Raymond (1965-05-01). "Cobalt Phthalocyanine as a Fuel Cell Cathode". Journal of the Electrochemical Society. 112 (5): 526. Bibcode:1965JElS..112..526J. doi:10.1149/1.2423590. ISSN   1945-7111.
  5. Jahnke, Horst; Schönborn, Manfred; Zimmermann, Georg (1976). Schäfer, F. P.; Gerischer, H.; Willig, F.; Meier, H.; Jahnke, H.; Schönborn, M.; Zimmermann, G. (eds.). "Organic dyestuffs as catalysts for fuel cells". Physical and Chemical Applications of Dyestuffs. Topics in Current Chemistry. 61. Berlin, Heidelberg: Springer: 133–181. doi:10.1007/BFb0046059. ISBN   978-3-540-38098-6. PMID   7032.
  6. Martinez, Ulises; Babu, Siddharth Komini; Holby, Edward F.; Chung, Hoon T.; Yin, Xi; Zelenay, Piotr (2019). "Progress in the Development of Fe-Based PGM-Free Electrocatalysts for the Oxygen Reduction Reaction". Advanced Materials. 31 (31): 1806545. Bibcode:2019AdM....3106545M. doi: 10.1002/adma.201806545 . ISSN   1521-4095. PMID   30790368.
  7. Yin, Hengbo; Xia, Huicong; Zhao, Shuyan; Li, Kexie; Zhang, Jianan; Mu, Shichun (2021). "Atomic Level Dispersed Metal–Nitrogen–Carbon Catalyst toward Oxygen Reduction Reaction: Synthesis Strategies and Chemical Environmental Regulation". Energy & Environmental Materials. 4 (1): 5–18. Bibcode:2021EEMat...4....5Y. doi: 10.1002/eem2.12085 . ISSN   2575-0356.
  8. Marshall-Roth, Travis; Libretto, Nicole J.; Wrobel, Alexandra T.; Anderton, Kevin J.; Pegis, Michael L.; Ricke, Nathan D.; Voorhis, Troy Van; Miller, Jeffrey T.; Surendranath, Yogesh (2020-10-19). "A pyridinic Fe-N 4 macrocycle models the active sites in Fe/N-doped carbon electrocatalysts". Nature Communications. 11 (1): 5283. Bibcode:2020NatCo..11.5283M. doi:10.1038/s41467-020-18969-6. ISSN   2041-1723. PMC   7572418 . PMID   33077736.
  9. Zhang, Nan; Zhou, Tianpei; Chen, Minglong; Feng, Hu; Yuan, Ruilin; Zhong, Cheng’an; Yan, Wensheng; Tian, Yangchao; Wu, Xiaojun; Chu, Wangsheng; Wu, Changzheng (2020-01-21). "High-purity pyrrole-type FeN4 sites as a superior oxygen reduction electrocatalyst". Energy & Environmental Science. 13 (1): 111–118. doi:10.1039/C9EE03027A. ISSN   1754-5706. S2CID   210712326.
  10. Han, Yunhu; Wang, Yanggang; Xu, Ruirui; Chen, Wenxing; Zheng, Lirong; Han, Aijuan; Zhu, Youqi; Zhang, Jian; Zhang, Huabin; Luo, Jun; Chen, Chen (2018-09-12). "Electronic structure engineering to boost oxygen reduction activity by controlling the coordination of the central metal". Energy & Environmental Science. 11 (9): 2348–2352. doi:10.1039/C8EE01481G. ISSN   1754-5706.