PC12 minicomputer

Last updated

PC12 by Artronix was a minicomputer built with 7400-series TTL technology and ferrite core memory. Computers were manufactured at the Artronix facility in suburban St. Louis, Missouri.

The instruction set architecture was adapted from the LINC, the only significant change was to expand addressable memory to 4K, which required addition of an origin register. It was an accumulator machine with 12-bit addresses to manipulate 12-bit data. Later versions included "origin registers" that were used to extend the addressability of memory. Arithmetic was one's complement.

For mass storage it had a LINCtape dual unit. It also used a Tektronix screen with tube memory and an ADC/DAC to capture and display images. There was an optional plotter to draw the results. To speed up the calculations it had a separate floating point unit that interfaced like any other peripheral.

It ran an operating system LAP6-PC with support for assembly language and Fortran programming and usually came with end user software for Radiation Treatment Planning (RTP), for use by a radiation therapist or radiation oncologist, and Hospital Patient Records. Software for implant dosimetry was available for the PC12. [1] With extended hardware it became a multiuser system running MUMPS. Latter additions included an 8" floppy disk and hard disk of larger capacity. The PC12 initially controlled the Artronix brain scanner (computed axial tomography), but this was for prototyping. The PC12 was also the core of an ultrasound system and a gamma camera system.

The PC12 was eventually superseded by the "Modulex" system built by Artronix around the 16-bit Lockheed SUE processor, roughly around 1976. The PC12 continued in production, but was phased out over time.

Sites which used the Artronix PC12 included the Lutheran Hospital Cancer Center in Moline, Illinois, where it was used to store the medical records of patients undergoing treatment for cancer. [2] A 1974 paper describes the use of a PC-12 as a frontend to an IBM 360 mainframe in radiation therapy, in which the PC-12 acted as the user interface while the mainframe is used to perform complex calculations. [3]

Related Research Articles

<span class="mw-page-title-main">Digital Equipment Corporation</span> U.S. computer manufacturer 1957–1998

Digital Equipment Corporation, using the trademark Digital, was a major American company in the computer industry from the 1960s to the 1990s. The company was co-founded by Ken Olsen and Harlan Anderson in 1957. Olsen was president until forced to resign in 1992, after the company had gone into precipitous decline.

A disk operating system (DOS) is a computer operating system that resides on and can use a disk storage device, such as a floppy disk, hard disk drive, or optical disc. A disk operating system provides a file system for organizing, reading, and writing files on the storage disk. Strictly, this definition does not include any other functionality, so it does not apply to more complex OSes, such as Microsoft Windows, and is more appropriately used only for older generations of operating systems.

<span class="mw-page-title-main">Minicomputer</span> Mid-1960s–late-1980s class of smaller computers

A minicomputer, or colloquially mini, is a type of smaller general-purpose computer developed in the mid-1960s and sold at a much lower price than mainframe and mid-size computers from IBM and its direct competitors. In a 1970 survey, The New York Times suggested a consensus definition of a minicomputer as a machine costing less than US$25,000, with an input-output device such as a teleprinter and at least four thousand words of memory, that is capable of running programs in a higher level language, such as Fortran or BASIC.

<span class="mw-page-title-main">PDP-11</span> Series of 16-bit minicomputers

The PDP–11 is a series of 16-bit minicomputers sold by Digital Equipment Corporation (DEC) from 1970 into the late 1990s, one of a set of products in the Programmed Data Processor (PDP) series. In total, around 600,000 PDP-11s of all models were sold, making it one of DEC's most successful product lines. The PDP-11 is considered by some experts to be the most popular minicomputer.

<span class="mw-page-title-main">Booting</span> Process of starting a computer

In computing, booting is the process of starting a computer as initiated via hardware such as a button or by a software command. After it is switched on, a computer's central processing unit (CPU) has no software in its main memory, so some process must load software into memory before it can be executed. This may be done by hardware or firmware in the CPU, or by a separate processor in the computer system.

<span class="mw-page-title-main">Microcomputer</span> Small computer with a processor made of one or a few integrated circuits

A microcomputer is a small, relatively inexpensive computer having a central processing unit (CPU) made out of a microprocessor. The computer also includes memory and input/output (I/O) circuitry together mounted on a printed circuit board (PCB). Microcomputers became popular in the 1970s and 1980s with the advent of increasingly powerful microprocessors. The predecessors to these computers, mainframes and minicomputers, were comparatively much larger and more expensive. Many microcomputers are also personal computers. An early use of the term "personal computer" in 1962 predates microprocessor-based designs. (See "Personal Computer: Computers at Companies" reference below). A "microcomputer" used as an embedded control system may have no human-readable input and output devices. "Personal computer" may be used generically or may denote an IBM PC compatible machine.

<span class="mw-page-title-main">History of operating systems</span> Aspect of computing history

Computer operating systems (OSes) provide a set of functions needed and used by most application programs on a computer, and the links needed to control and synchronize computer hardware. On the first computers, with no operating system, every program needed the full hardware specification to run correctly and perform standard tasks, and its own drivers for peripheral devices like printers and punched paper card readers. The growing complexity of hardware and application programs eventually made operating systems a necessity for everyday use.

<span class="mw-page-title-main">Workstation</span> High-end single-user computer

A workstation is a special computer designed for technical or scientific applications. Intended primarily to be used by a single user, they are commonly connected to a local area network and run multi-user operating systems. The term workstation has been used loosely to refer to everything from a mainframe computer terminal to a PC connected to a network, but the most common form refers to the class of hardware offered by several current and defunct companies such as Sun Microsystems, Silicon Graphics, Apollo Computer, DEC, HP, NeXT, and IBM which powered the 3D computer graphics revolution of the late 1990s.

<span class="mw-page-title-main">Xerox Alto</span> Computer made by Xerox

The Xerox Alto is a computer designed from its inception to support an operating system based on a graphical user interface (GUI), later using the desktop metaphor. The first machines were introduced on 1 March 1973, a decade before mass-market GUI machines became available.

<span class="mw-page-title-main">History of computing hardware (1960s–present)</span> Aspect of history

The history of computing hardware starting at 1960 is marked by the conversion from vacuum tube to solid-state devices such as transistors and then integrated circuit (IC) chips. Around 1953 to 1959, discrete transistors started being considered sufficiently reliable and economical that they made further vacuum tube computers uncompetitive. Metal–oxide–semiconductor (MOS) large-scale integration (LSI) technology subsequently led to the development of semiconductor memory in the mid-to-late 1960s and then the microprocessor in the early 1970s. This led to primary computer memory moving away from magnetic-core memory devices to solid-state static and dynamic semiconductor memory, which greatly reduced the cost, size, and power consumption of computers. These advances led to the miniaturized personal computer (PC) in the 1970s, starting with home computers and desktop computers, followed by laptops and then mobile computers over the next several decades.

<span class="mw-page-title-main">Expanded memory</span> System of bank switching in DOS memory management

In DOS memory management, expanded memory is a system of bank switching that provided additional memory to DOS programs beyond the limit of conventional memory (640 KiB).

<span class="mw-page-title-main">Signetics 2650</span> 8-bit microprocessor

The Signetics 2650 was an 8-bit microprocessor introduced in July 1975. According to Adam Osborne's book An Introduction to Microprocessors Vol 2: Some Real Products, it was "the most minicomputer-like" of the microprocessors available at the time. A combination of missing features and odd memory access limited its appeal, and the system saw little use in the market.

<span class="mw-page-title-main">DEC Professional (computer)</span>

The Professional 325 (PRO-325), Professional 350 (PRO-350), and Professional 380 (PRO-380) are PDP-11 compatible microcomputers introduced in 1982 by Digital Equipment Corporation (DEC) as high-end competitors to the IBM PC.

Multidata Systems International is a maker of radiation therapy products based in St. Louis, Missouri. Their major product lines include realtime dosimetry or RTD, which includes 3D water phantoms, Film dosimetry and air scanners. Since 2003, Multidata has been under a Consent Decree of Permanent Injunction entered by the U.S. District Court for the Eastern District of Missouri for the US FDA. The consent decree prohibits the company from designing, manufacturing, processing, and distributing medical devices, among other restrictions.

<span class="mw-page-title-main">IBM 3270 PC</span>

The IBM 3270 PC, released in October 1983, is an IBM PC XT containing additional hardware that, in combination with software, can emulate the behaviour of an IBM 3270 terminal. It can therefore be used both as a standalone computer, and as a terminal to a mainframe.

<span class="mw-page-title-main">Midrange computer</span> Class of computer systems that fall in between mainframes and minicomputers

Midrange computers, or midrange systems, were a class of computer systems that fell in between mainframe computers and microcomputers.

<span class="mw-page-title-main">History of personal computers</span> History of the consumer personal computer

The history of the personal computer as a mass-market consumer electronic device began with the microcomputer revolution of the 1970s. A personal computer is one intended for interactive individual use, as opposed to a mainframe computer where the end user's requests are filtered through operating staff, or a time-sharing system in which one large processor is shared by many individuals. After the development of the microprocessor, individual personal computers were low enough in cost that they eventually became affordable consumer goods. Early personal computers – generally called microcomputers – were sold often in electronic kit form and in limited numbers, and were of interest mostly to hobbyists and technicians.

<span class="mw-page-title-main">Classes of computers</span>

Computers can be classified, or typed, in many ways. Some common classifications of computers are given below.

<span class="mw-page-title-main">PDP-8/e</span> 1970 model of the DEC PDP-8 line of minicomputers

The PDP-8/e was a model of the PDP-8 line of minicomputers, designed by the Digital Equipment Corporation to be a general purpose computer that inexpensively met the needs of the average user while also being capable of modular expansion to meet the more specific needs of advanced user.

Pacific Cyber/Metrix, Inc. was an American computer company based in California. The company was founded in 1975 in San Ramon, California.

References

  1. Sharma, Subhash C.; Bello, Julia E.; Abrath, Fred G. (March 1979). "Stereo and orthogonal options of the Artronix PC-12 implant dosimetry program". Medical Physics. 6 (2): 157–158. Bibcode:1979MedPh...6..157S. doi:10.1118/1.594530. ISSN   0094-2405. PMID   460066.
  2. Rathe, John C.; Elliott, Paul F. (January 1979). "A cancer registry for the community radiation center". Cancer. 43 (1): 198–204. doi: 10.1002/1097-0142(197901)43:1<198::aid-cncr2820430129>3.0.co;2-3 . ISSN   1097-0142. PMID   761162.
  3. Mohan, Radhe; Holt, J. Garrett; Laughlin, John S.; Krippner, Kenneth (1974). "Incorporation of a Minicomputer as an Intelligent Terminal a Planning System". Radiology. 110 (1): 183–190. doi:10.1148/110.1.183. PMID   4808525.