PMSS Sabqat

Last updated
USCGC Grand Isle (WPB-1338), off Crete.jpg
USCGC Grand Isle (WPB-1338) off Crete in 2003
History
Flag of the United States Coast Guard.svgUnited States
NameGrand Isle
Namesake Grand Isle, Louisiana
Builder Bollinger Shipyards [1]
Commissioned1991
Decommissioned2015
Identification
Naval Ensign of Pakistan.svgPakistan
NameSabqat
Owner Pakistan Maritime Security Agency
Acquired21 September 2017
Identification1066
General characteristics
Class and typeC-series Island-class patrol boat [2]
Displacement153 long tons (155  t)
Length110 ft (34 m)
Beam21 ft (6.4 m)
Draft6.5 ft (2.0 m)
Propulsion2 × 16-cylinder Caterpillar 3516 diesel engines
Speed29.5 knots (54.6 km/h; 33.9 mph)
Range3,300 nmi (6,100 km; 3,800 mi)
Endurance5 days
Boats & landing
craft carried
1 × Cutter Boat Medium (90 HP outboard engine)
Complement16 (2 officers, 14 enlisted)
Sensors and
processing systems
AN/SPS-64V radar
Armament

USCGC Grand Isle (WPB-1338) was an Island-class patrol boat operated by the United States Coast Guard. [3] She was based in Gloucester, Massachusetts, and named after Grand Isle, Louisiana. In 2016, the ship was transferred to Pakistan and renamed Sabqat.

Contents

Design

The Island-class patrol boats were constructed in Bollinger Shipyards, Lockport, Louisiana. Grand Isle has an overall length of 110 feet (34 m). It had a beam of 21 feet (6.4 m) and a draft of 7 feet (2.1 m) at the time of construction. The patrol boat has a displacement of 154 tonnes (152 long tons; 170 short tons) at full load and 137 tonnes (135 long tons; 151 short tons) at half load. It is powered by two Paxman Valenta 16 CM diesel engines or two Caterpillar 3516 diesel engines. It has two 99 kilowatts (135 PS; 133 shp) 3304T diesel generators made by Caterpillar; these can serve as motor–generators. Its hull is constructed from highly strong steel, and the superstructure and major deck are constructed from aluminum. [4] [5]

The Island-class patrol boats have maximum sustained speeds of 29.5 knots (54.6 km/h; 33.9 mph). It is fitted with one 25 millimetres (0.98 in) machine gun and two 7.62 millimetres (0.300 in) M60 light machine guns; it may also be fitted with two Browning .50 caliber machine guns. It is fitted with satellite navigation systems, collision avoidance systems, surface radar, and a Loran C system. It has a range of 3,330 miles (2,890 nmi; 5,360 km) and an endurance of five days. Its complement is sixteen (two officers and fourteen crew members). Island-class patrol boats are based on Vosper Thornycroft 33 metres (108 ft) patrol boats and have similar dimensions. [4] [5]

Construction and career

In January 2012 Grand Isle returned to Gloucester after repairs that took six months. [6] When she entered the Baltimore dockyard in the summer of 2011, she was estimated to require $1.6 million in repairs, repairs that would take eight weeks. [7] However, more extensive repairs were required, which took longer, and cost $2.7 million.

As of December 2016, the United States Government transferred Grand Isle from the United States Coast Guard to the Pakistan Navy's Maritime Security Agency under the Office of International Acquisition’s Excess Defense Articles (EDA) Program, together with sister ship Key Biscayne. Grand Isle was renamed Sabqat and assigned number 1066.

Related Research Articles

Marine Protector-class patrol boat

The Marine Protector class is a class of coastal patrol boats of the United States Coast Guard. The 87-foot-long vessels are based on the Stan 2600 design by Damen Group, and were built by Bollinger Shipyards of Lockport, Louisiana. Each boat is named after sea creatures which fly or swim

Island-class patrol boat Class of cutters of the U.S. Coast Guard

The Island-class patrol boat is a class of cutters of the United States Coast Guard. 49 cutters of the class were built, of which 37 remain in commission. Their hull numbers are WPB-1301 through WPB-1349.

USCGC <i>Matagorda</i> (WPB-1303)

USCGC Matagorda (WPB-1303) is an Island-class patrol boat of the United States Coast Guard. She was commissioned 24 April 1986. Matagorda was one of eight of the 110-foot cutters to be modified under the Integrated Deepwater System Program aka. "Deepwater" to 123-foot. She was taken out of service about December 2006 due to problems with the Deepwater conversion.

USCGC <i>Cape Henlopen</i> Type "C" Cape-class coast guard cutter

USCGC Cape Henlopen was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.

USCGC <i>Ocracoke</i> Island-class patrol boat of the US Coast Guard

USCGC Ocracoke (WPB-1307) is an Island Class Cutter of the United States Coast Guard. She is homeported in Maine, where she patrols international and territorial waters as a humanitarian, law enforcement, and Homeland Security asset. Her primary missions are Search and Rescue, Counter-Smuggling Activities, and Homeland Security.

Ukrainian patrol vessel <i>Sloviansk</i> Former Island-class patrol boat

The Ukrainian patrol vessel Sloviansk (P190) was an Island-class patrol boat of the Naval Forces of the Armed Forces of Ukraine. Originally named USCGC Cushing when in service with the United States Coast Guard, the vessel was acquired by Ukraine in 2018 and arrived in Ukraine on 21 October 2019. Sloviansk was sunk in combat on 3 March 2022 by a Russian air-to-surface missile.

USCGC <i>Kiska</i> Island-class patrol boat of the US Coast Guard

USCGC Kiska (WPB-1336) is an Island-class cutter of the United States Coast Guard, named for the island of Kiska, Alaska.

USCGC <i>Mustang</i>

The USCGC Mustang (WPB-1310),, is an Island-class cutter of the United States Coast Guard. She is stationed in Seward, Alaska, at the top of the Gulf of Alaska. Mustang is one of seven Island-class patrol boats in Alaska. Her primary objective is maritime safety, though she is a multiple-role ship.

Bollinger Shipyards is an American constructor of ships, workboats and patrol vessels. Its thirteen shipyards and forty drydocks are located in Louisiana and Texas. Its drydocks range in capacity from vessels of 100 tons displacement to 22,000 tons displacement. The firm was founded in 1946.

USCGC Galveston Island is an Island-class patrol boat used by the United States Coast Guard for law enforcement and search and rescue duties. She was commissioned on 5 June 1992 and was the last of the Island-class patrol boats built. Her original homeport was Apra Harbor, Guam, but later changed to Honolulu, Hawaii, where she was decommissioned.

USCGC <i>Assateague</i>

USCGC Assateague (WPB-1337) was an Island-class cutter of the United States Coast Guard. Assateague was constructed at Bollinger Machine Shop and Shipyard in Lockport, Louisiana, and commissioned on 15 June 1990.

USCGC <i>Point Young</i> United States Coast Guard cutter

USCGC Point Young (WPB-82303) was an 82-foot (25 m) Point class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1960 for use as a law enforcement and search and rescue patrol boat. Since the Coast Guard policy in 1960 was not to name cutters under 100 feet (30 m) in length, it was designated as WPB-82303 when commissioned and acquired the name Point Young in January 1964 when the Coast Guard started naming all cutters longer than 65 feet (20 m).

USCGC <i>Anacapa</i> U.S. Coast Guard patrol boat

USCGC Anacapa (WPB-1335) is an Island-class cutter of the United States Coast Guard. She is based at Petersburg, Alaska and is responsible for law enforcement, search and rescue, and maritime defense.

USCGC <i>Liberty</i> U.S. Coast Guard vessel

USCGC Liberty (WPB-1334) is an Island-class cutter of the United States Coast Guard. She spent her first 33 years of service homeported in Juneau, Alaska where she patrolled territorial waters, including the Inside Passage. In 2016 she won the Hopley Yeaton Cutter Excellence Award for outstanding operational and humanitarian achievements. In 2022 she was reassigned to Valdez, Alaska.

USCGC <i>Halibut</i>

USCGC Halibut is a United States Coast Guard Marine Protector-class coastal patrol boat based in Marina del Rey, California. Her patrol area is the 300 miles (480 km) from Morro Bay to Dana Point, California, and several important offshore islands.

USCGC Cape Cross was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.

USCGC Cape Horn was a 95-foot (29 m) type "C" Cape-class cutter constructed at the Coast Guard Yard at Curtis Bay, Maryland in 1958 for use as a law enforcement and search and rescue patrol boat.

USCGC <i>Sapelo</i>

The USCGC Sapelo (WPB-1314) is an Island class cutter, operated by the United States Coast Guard. In 2013, unlike other Island class cutters, she was not commanded by a commissioned officer, she was commanded by a Chief Warrant Officer.

USCGC <i>Washington</i> Island-class patrol boat of the US Coast Guard

USCGC Washington (WPB-1331) is an Island-class cutter of the United States Coast Guard. Washington was constructed at Bollinger Machine Shop and Shipyard in Lockport, Louisiana, and commissioned on 15 June 1990.

USCGC <i>Terrapin</i> United States Coast Guard ship

USCGC Terrapin (WPB-87366) is a United States Coast Guard ship of the Marine Protector class. She is assigned to Coast Guard District 13 and is home-ported at Bellingham, Washington. Her main areas of responsibility are the San Juan Islands, the Strait of Juan de Fuca, and Puget Sound. Her missions include search and rescue, law enforcement, and homeland security.

References

  1. "WPB 110' Island Class : Ship list". globalsecurity.org. 2012. Retrieved 30 July 2012.
  2. "WPB 110' Island Class". globalsecurity.org. 2012. Retrieved 30 July 2012.
  3. "USCGC Grand Isle". Louisiana Naval War Memorial Commission. 2006. Retrieved 2012-01-31.
  4. 1 2 "110-foot Island Class Patrol Boat (WPB)" (PDF). United States Coast Guard. Retrieved 24 August 2015.
  5. 1 2 "USCG 110' "Island Class" Patrol Boats (WPB)". Bollinger Shipyards. Retrieved 24 August 2015.
  6. Stephanie Bergman (2012-01-28). "Local cutter's entire Coast Guard class has troubled repair history". Gloucester Times . Retrieved 2012-01-31. The Grand Isle, meanwhile, is returning to service after undergoing repairs in Baltimore. It cost $2.7 million to replace 530 square feet of the vessel's hull, which was badly pitted and 85 percent deteriorated. That damage was why the Grand Isle, originally scheduled for eight weeks of repairs to cost $1.6 million last summer, remained in Baltimore for so long.
  7. "Where's The Grand Isle Been? We Got The Pics From Gloucester's Cutter Rebuild At The Coast Guard's Baltimore Yard". Good Morning Gloucester. 2011-12-22. Retrieved 2012-01-31. Gloucester's Coast Guard Cutter The Grand Isle was supposed to go for a simple overhaul lasting 8 weeks down in the Coast Guard's Baltimore Shipyard. 26 weeks later and a ginormous laundry list of unexpected repairs has the Grand Isle crew eager to get back in the water and home to Gloucester.