D-8 | |
---|---|
Role | Glider |
National origin | United States |
Manufacturer | Pacific Aircraft Company [1] |
Designer | Ken Coward |
First flight | May 1964 |
Introduction | 1963 |
Status | No longer available |
Number built | 5 [2] |
The Pacific D-8 is an American, single-seat, high-wing glider, that was designed by Ken Coward and made available as plans for amateur construction. [3] [4] [5]
The D-8 was conceived by Coward as an easy-to-build and inexpensive all-aluminium glider with good performance, that could be flown with or without a canopy. Later flight testing of a completed D-8 showed that the hoped-for performance was not achieved as the glide ratio was measured at just 17:1 with no canopy fitted. [3] [4]
Coward designed the D-8 and sold plans, but never built a prototype. The first D-8 was built by Klaus Hill and Bruno Hauffe who purchased plans in 1963. Virl Kimber made the first flight of the aircraft in May 1964. Early aircraft built showed that the ailerons and rudder were too small and that the wing was set at too high an angle of incidence for safety and most were subsequently modified. The plans were changed to incorporate larger ailerons. The all-metal wing is a one piece unit 32 ft (9.8 m) in span and 125 lb (57 kg) in weight, that proved a challenge to design a trailer to carry. [5]
At least five were completed, including one built by members of the Lockhaven Glider Club in Pennsylvania. That same aircraft was used for extensive flight testing by a subsequent owner to accurately measure its performance. One was built as a powered motor glider. [2] [3] [4] [6]
Data from Sailplane Directory and Soaring [3] [4]
General characteristics
Performance
Aircraft of comparable role, configuration, and era
The Glasflügel 303 Mosquito is a composite 15 metre Class single-seat sailplane manufactured by Glasflügel between 1976 and 1980.
The Schweizer SGU 2-22 is an American two-seat, high-wing, strut-braced, training glider built by Schweizer Aircraft of Elmira, New York.
The Glasflügel 604 is a high-wing, T-tailed, single seat, FAI Open Class glider that was designed and produced in West Germany by Glasflügel starting in 1970.
The Slingsby T.9 King Kite is a British glider designed and built by Slingsby that first flew in 1937.
The Applebay Zuni and Zuni II are single-seat, water-ballasted gliders designed to compete in the FAI 15m class.
The Nelson Hummingbird PG-185B is an American, tandem two seat, mid-wing motor glider that was developed by Nelson Aircraft after discontinuing the Nelson Dragonfly.
The Rutan Model 77 Solitaire is an American, single seat, canard, mid-wing motor glider that was developed by Burt Rutan in response to the 1982 Sailplane Homebuilders Association Design Contest for a homebuilt glider. It first flew in 1982. The Solitaire was declared the winner of the contest and its unusual layout attracted a great deal of attention. For a time in the 1980s the aircraft was available as plans and as a kit.
The Marske Pioneer is a family of American, single-seat, mid-wing, tailless gliders that was designed by Jim Marske. The Pioneer II version was available as plans and in kit form from Marske Aircraft Corporation for amateur construction.
The Hall Vector 1 is an American high-wing, ultralight glider that was designed by Stan Hall for serious cross-country flights.
The Bikle T-6 is an American, mid-wing, single seat, glider designed by Paul Bikle and based upon the design of the Schreder HP-14. Even though only one T-6 was built it is noted as the most tested and studied glider with complete data published. It has been used extensively as a comparative reference glider for evaluating other designs during in-flight comparisons.
The Bowlus BZ-1 is an American single seat FAI 15 Meter Class, V-tailed glider that was designed and built by Michael Bowlus.
The EoN 460 series are wooden single-seat standard class sailplanes, built in the UK in the 1960s. It did not have major competition success but some remain in use in 2021.
The Explorer PG-1 Aqua Glider is an American single seat, biplane glider that was designed by Bill Skiliar in 1959 and made available as plans for amateur construction. The prototype was built with help from a troop of Air Explorer Scouts that same year.
The Lamson L-106 Alcor is an American, high-wing, experimental, pressurized research glider that was designed and built by Bob Lamson. The Alcor was the first pressurized sailplane ever built.
The Prue 160 was an American mid-wing, V-tailed, single-seat glider that was designed and built by Irving Prue in 1945.
The Schultz Nucleon is an American high-wing strut-braced, single-seat glider that was designed and constructed by Arthur B. Schultz.
The Whigham GW-3 is a family of American mid-wing, single-seat, FAI Open Class gliders that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair. It first flew in 1965.
The Whigham GW-5 is an American mid-wing, single seat, FAI Standard Class glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.
The Whigham GW-6 is an American mid-wing, single-seat, glider that was designed and constructed by Gene Whigham, a retired flight test engineer for Convair.
The Győr-2 was a high performance sailplane designed and built at the Aircraft Designer and Builder Group, Aeroclub of the Rolling-stock Factory, Győr in Hungary in the early 1950s.
{{cite journal}}
: Missing or empty |title=
(help)